Question about Honda Pilot

Open Question

Can't get glove box open on honda pilot 03 key will not go in

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: 2000 Toyota Corolla VE -- Glove Box Stuck

The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.

Posted on Nov 02, 2008

CRTN
  • 716 Answers

SOURCE: 1996 honda civic wont start

This Clicking Noise Is Normal I Drove Myself Crazy On The Same Clicking Sound I Was Ripping Off Panels In The Middle Of The Desert lol. Anyways Its Not It Try Checking Your Starter. Does The Engine Crank At All? If I t Just Goes Click Real Loud It Would Be A Good Indication Its Your Starter. Also Does It Start Sometimes? Or Did It?

Posted on Jan 05, 2009

  • 236 Answers

SOURCE: 2003 Honda Pilot Door locks not working

may be a relay switch, or a faulty wire on the right side behind the glove box

Posted on Jun 17, 2009

  • 1 Answer

SOURCE: ignition key won't turn in 03 honda pilot

Call a locksmith. You may have to call several but I had one fix mine and it only cost about $200.00! To me that was a bargain because the dealership quoted me about $700.00.

Posted on Sep 21, 2009

jyackle5
  • 8197 Answers

SOURCE: how to replace cabin air filter in 2003 pilot

Step 1 Take everything out of the glove box on the passenger side. Squeeze the black clips on either side of the glove box interior to free it from its retainer and pull it toward you. It will glide forward on hinged arms. Lower it as much as possible so it's out of your way.

  • Step 2 Identify the gray plastic bar that runs from left to right across the bottom of the glove box opening. This is a piece of plastic molded to the rest of the glove box assembly, but it covers up a removable bar that is mounted directly in front of the cabin air filtermag-glass_10x10.gif case. You'll have to cut this plastic bar off with a razor knife to proceed. Fortunately, this isn't too difficult; just cut carefully and steadily, and make your cuts as close as possible to the ends of the bar.
  • Step 3 Remove the metal bar you uncovered in the previous step. It is screwed into the glove box assembly with Phillips head screws on either side.
  • Step 4 Open the cabin air filter case, which is the large plastic case on the left side off the glove box opening. The hatch will come all the way off when you open it.
  • Step 5 Take the old air filter out of the case and throw it away.
  • Step 6 Look at the arrows on the filter and the arrows on the filter case that indicate the direction of the air flow. Slide the new filter into place so that the arrows are both pointing the same way.
  • Step 7 Put the lid back on the air filter case and reinstall the metal bar you removed in Step 3.
  • Step 8 Push the glove box interior compartment back into place and listen for the snapping sound. Put the glove box contents back, close the lid and you're done.
  • Posted on Dec 06, 2009

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Code Radio Honda pilot 2003


    Open the glove box and look on the side for the code, it will be on a decal.

    Dec 11, 2014 | 2003 Honda Pilot

    1 Answer

    Diagram for glove box


    Its a common problem with the 2003-1007 accord. You will need to replace the glove box latch assembly. If you can find it separate! Most of the junk yards sell a complete glove box. You could check ebay? 03 04 05 06 07 HONDA ACCORD GLOVE BOX OEM

    Apr 03, 2014 | 2006 Honda Accord

    1 Answer

    Where is the inside latch for the hood on a 2011 pilot?


    open glove box, extract the operator guide? its there.
    lost it , then get one from Honda, and put it back.

    Jan 07, 2014 | 2011 Honda Pilot

    1 Answer

    How to change cabin air filter honda pilot 2007


    1.remove the glove box. 2.Cut the plastic cross brace in the glove box opening with diagonal cutters in the area shown, and discard it. 3. Remove the bolts, the srews, and the glove box frame. 4. remove the filter lid from the evaporator, then pull out the dust and pollen filter.

    Jun 20, 2010 | 2007 Honda Pilot

    1 Answer

    How to replace cabin air filter in 2003 pilot


    Step 1 Take everything out of the glove box on the passenger side. Squeeze the black clips on either side of the glove box interior to free it from its retainer and pull it toward you. It will glide forward on hinged arms. Lower it as much as possible so it's out of your way.
  • Step 2 Identify the gray plastic bar that runs from left to right across the bottom of the glove box opening. This is a piece of plastic molded to the rest of the glove box assembly, but it covers up a removable bar that is mounted directly in front of the cabin air filtermag-glass_10x10.gif case. You'll have to cut this plastic bar off with a razor knife to proceed. Fortunately, this isn't too difficult; just cut carefully and steadily, and make your cuts as close as possible to the ends of the bar.
  • Step 3 Remove the metal bar you uncovered in the previous step. It is screwed into the glove box assembly with Phillips head screws on either side.
  • Step 4 Open the cabin air filter case, which is the large plastic case on the left side off the glove box opening. The hatch will come all the way off when you open it.
  • Step 5 Take the old air filter out of the case and throw it away.
  • Step 6 Look at the arrows on the filter and the arrows on the filter case that indicate the direction of the air flow. Slide the new filter into place so that the arrows are both pointing the same way.
  • Step 7 Put the lid back on the air filter case and reinstall the metal bar you removed in Step 3.
  • Step 8 Push the glove box interior compartment back into place and listen for the snapping sound. Put the glove box contents back, close the lid and you're done.
  • Dec 06, 2009 | 2003 Honda Pilot

    2 Answers

    2008 honda pilot cabin air filter


    This solution pertains to a 2008 Honda Pilot...To replace the cabin air filter which is located on the passenger side of the vehicle behind the glove box: Open glove box and remove stored items...while sitting in the passenger seat, pull towards you on each of the two clips on the left and right side of the glove box...this will cause them to become loose and the glove box will tip out completely exposing the inside of the dashboard. (Alternately...carefully pull towards you on the top center of the glove box which will cause the left and right side stops to pull away from the edges and allow the glove box to tip out) Here it gets tricky...the box holding the cartridge for the cabin air filter is the large black box on the left side behind the glove box The filter fits in a removable tray vertically inside that box. A pressure clip at the top of the box allows the vertical cover to be removed exposing the tray with the Cabin air filter... BUT!!! There is a plastic bar an inch or so high which has been placed there by the manufacturer to prevent most from changing the filter without the service department being involved. This bar must be cut with a sharp sheetrock knife or hacksaw and discarded, (it will not be reinstalled). Then there is a flat metal bar behind the plastic bar that can be removed using an 8mm socket and a phillips screwdriver. There are 2 8mm screws and one phillips head screw on each side that must be removed in order to remove the metal bar. THEN you can remove the cover to the cabin air filter box, pull out the tray with the filter (note how the filter is in the box so the new one can be placed the same way) reinsert the tray with the new filter and replace the tray cover. All other steps to finish the job are obvious as everything is the reverse. Actually the whole process is a lot of trouble and unless you are determined to change the filter I would recommend not doing it.

    Aug 24, 2009 | 2008 Honda Pilot

    1 Answer

    2003 Honda Pilot Door locks not working


    may be a relay switch, or a faulty wire on the right side behind the glove box

    Jun 16, 2009 | 2003 Honda Pilot

    1 Answer

    Air/Cabin filter Maintenace


    Simple! No tools needed! Take everything out of glove box. Squeeze sides in until glove box can swivel down. You will se a black cover that has arrows on it showing the direction of air flow. Squeeze the side latches on that cover and it slides right out. The casing is "keyed" so it will only go back in one way. If you can read the wording on the cover, you have it right.

    Jun 02, 2009 | 2009 Honda Pilot

    1 Answer

    Hi, I replaced my honda pilot/03 battery and now my radio is locked...


    First open you glove box and look on the sides of the glove box. Look on all sides. Then check your owners manuel in secruity codes section. If the tech who did the PDI On the car did it properly you should have the code written in then and a sticker on the outside of your glove box.

    If not then call the dealer and they should be able to look it using you VIN number,

    Dec 11, 2008 | 2003 Honda Pilot

    1 Answer

    Cabin Filter replacement


    The filter comes with the instructions. I just did it last night to my Honda. It is behind the glove box. You need to remove the glove box, cut a plastic beam out, unscrew the metal support beam and then open and r/r the filter. The instructions don't mention that you need to remove the trim that covers the little fuse box located on the side panel--there is a plastic retainer that you unscrew by hand and then it all comes off easiliy!

    Jul 23, 2008 | 2005 Honda Pilot

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    205 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7711 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...