Question about 2006 Ford Mustang

Open Question

How do I change coolant on 2006 ford mustang gt?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1998 mustang gt coolant leak

I just had the same problem. Ford design the intake manifold with plastic water crossover which cracks. The coolant will leak onto the top of the block and and then down the back of the engine. This intake design is a known defect and was ocvered under by Ford for 7 years past the date of mfg. The crack either is in the crossover or the thermostat housing. I happed on this when I found the same leak and traced it back to the thermostat housing. I changed the thermostat, but it leaked worse. You can pickup a aftermarket for $200 and it's about 4-6 hr job to replace.

Posted on Oct 21, 2008

alicantecoli
  • 22156 Answers

SOURCE: I have a 1991 Ford Mustang GT speedo problem

speedo inner cable sticking in the outer,take the head out and then pull the inner cable out clean it with an oily rag with a bit of gas on then oil it as you put it back in the outer casing

Posted on Nov 06, 2008

csmock132
  • 4669 Answers

SOURCE: 2006 Ford mustang check engine light come on

You need to have it scanned to see what code turned on the light. Check your gas cap, make sure it is tight.

Posted on Feb 27, 2009

ZJLimited
  • 17970 Answers

SOURCE: how do I change a 2005 mustang alternator? NOT gt

2005 Ford Mustang 4.0L SFI SOHC 6cyl
Ford Mustang 1999-2005
Alternator - Removal & Installation

3.8L And 4.0L Engines

  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Disconnect the alternator electrical connectors.
  5. Remove the alternator shield (4.0L engine).
  6. Remove the alternator mounting bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 35 ft. lbs. (47 Nm) and the upper bolt to 18 ft. lbs. (25 Nm).
  2. Install the alternator shield (4.0L engine).
  3. Connect the alternator electrical connectors.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.

4.6L Engines (Non-Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the air intake scoop bracket, if equipped.
  4. Remove the accessory drive belt.
  5. Remove the upper alternator bracket.
  6. Disconnect the alternator electrical connectors.
  7. Remove the alternator bolts.
  8. Remove the alternator from the vehicle.
  9. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the mounting bolts to 18 ft. lbs. (25 Nm).
  2. Connect the alternator electrical connectors.
  3. Install the upper alternator bracket. Tighten the bolts to 89 inch lbs. (10 Nm).
  4. Install the accessory drive belt.
  5. Install the air intake scoop bracket, if equipped.
  6. Connect the negative battery cable.
4.6L Engines (Supercharged)
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Remove the accessory drive belt.
  4. Raise the vehicle.
  5. Disconnect the alternator electrical connectors.
  6. Remove the alternator bolts.
  7. Remove the alternator from the vehicle.
  8. Installation is the reverse of the removal procedure.
To install:
  1. Position the alternator onto engine. Tighten the lower bolt to 18 ft. lbs. (25 Nm) and the upper bolt to 37 ft. lbs. (50 Nm).
  2. Connect the alternator electrical connectors.
  3. Lower the vehicle.
  4. Install the accessory drive belt.
  5. Connect the negative battery cable.
  6. Installation is the reverse of the removal procedure.

More details about this model in Autozone.com (free register).

I hope help you with this (remember rated this help). Good luck.

Posted on Sep 17, 2009

  • 95 Answers

SOURCE: refill gear oil in rear differential on 2003 ford mustang gt

The differential will have a plug in the driver's side of the housing that is removed with a 3/8" drive ratchet or square drive. Be sure you know what type of fluid is recommended for your vehicle. It will depend on whether it is a locking differential or standard.

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4.6 Engine valve train in 2008 Ford Mustang Gt


    mages for 4.6 Engine valve train in 2008 Ford Mustang Gt


    More images for 4.6 Engine valve train in 2008 Ford Mustang Gt

    2005-2009 Mustang Cylinder Heads & Valvetrain ...

    www.americanmuscle.com/mustang-valvetrain-0508.html
    They help your motor breathe better and also make sure your Mustang gives top-notch throttle response. ... 2005, 2006, 2007, 2008, 2009 Mustangs; V6, GT, Bullitt, Shelby GT500, ... 2005-2009 Mustang GT Cylinder Heads & Valvetrain Components ... (6).Ford Racing SOHC 3V 4.6L Head Changing Kit (05-10 GT) $76.00.

    Mustang Camshaft Facts & Technical Information ...

    www.americanmuscle.com/camshaft-tech-guide.html

Feb 08, 2016 | Ford Cars & Trucks

1 Answer

How do you know when the fule pump is bad on a 2006 ford mustang gt


if you turn the key on and have some one listen by the gas tank you should here it running if not it is bad

Mar 24, 2013 | 2006 Ford Mustang GT

1 Answer

Left headlight won't work on 2006 mustang gt


lights left side 06 muatang dont work

Nov 24, 2011 | 2006 Ford Mustang

1 Answer

How to drain my radiator and change the thermostat in my 2007 mustang 4.6 lt engine?


Why would you drain the rad ? there is no need ... just pull the thermostat and wash any coolant left over with some water.

Jul 22, 2010 | 2006 Ford Mustang

2 Answers

2006 Ford Mustang GT knocking suspension


Check all bushings in the control arms and springs for wear.

May 17, 2010 | Ford Mustang Cars & Trucks

1 Answer

2006 Ford Mustang GT 4.6 liter can jump off


its most likey your altenator there =s no charge going to the batt

Dec 19, 2009 | 2006 Ford Mustang

2 Answers

1998 mustang gt coolant leak


I just had the same problem. Ford design the intake manifold with plastic water crossover which cracks. The coolant will leak onto the top of the block and and then down the back of the engine. This intake design is a known defect and was ocvered under by Ford for 7 years past the date of mfg. The crack either is in the crossover or the thermostat housing. I happed on this when I found the same leak and traced it back to the thermostat housing. I changed the thermostat, but it leaked worse. You can pickup a aftermarket for $200 and it's about 4-6 hr job to replace.

Oct 18, 2008 | 1998 Ford Mustang

1 Answer

2003 ford mustang


HI, i have the samme problemeon my mustang gt 2006
idid hevriting ,plug chek wires , and the probleme was the valve was sticking on the guide ,we change the head , and now it is very jood, good luck
it was misfiring whit no code

Sep 04, 2008 | 2006 Ford Mustang

Not finding what you are looking for?
2006 Ford Mustang Logo

Related Topics:

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...