Question about Dodge Caravan

1 Answer

Had our back wheel bearing replaced two months ago and now we need to replace them again is there another issue

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 184 Answers

I would get another opinion.It could be a tire noise that sounds like a bearing issue.
Possibly they weren't installed or greased correctly the first time.If the work is done,ask to see the ones removed.
Unsure what model that you have.
But if you can or have a mechanic or friend check the bearing by raising the wheel on the faulty side(safely and supported)with the hand brake off,spin the wheel fast while putting your hand onto the shock absorber that side.Any harshness in the bearing will be felt as a vibration in the shock.This is really only effective on a fwd vehicle.
Listen for a rumbling noise also,and check for 'rock' in the wheel by holding onto the wheel top and bottom and pushing/pulling at the top and pull/push at the bottom.Depending on the type of bearing,there either should be no movement or just the slightest feel of movement.
Finally while spinning the tires,check for any unusual wear or out of round of each.
Let me know your findings.Hope this helps you.

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My AVEO 2006 is making a humming noise, coming out in the middle engine compartment of the front or dashboard area. It start to be hear when speed goes between 55 kph and 80kph, and sounds like it is


The most common reason for a humming noise in the front area of your car would be a wheel bearing noise. I would start by having the wheel bearings checked.

There are two ways to check the bearings, one would be to jack wheels of the ground and check for free play in wheels, the other would require having a tech test drive the car, a good test drive by a tech can tell you if it is a wheel bearing problem.

A wheel bearing noise will get louder as the speed increases and the tone will change if the wheel is turned left or right.
You can try this test yourself, get car up to speed of noise and then listen as you turn wheel to left and then right and if the tone changes then i would suspect the bearing and next step is to find out which one, this would need to be done on a lift. good day

Jul 01, 2012 | Chevrolet Aveo Cars & Trucks

1 Answer

I'm hearing a grinding sound coming from underneath my suv. i have replace the brakes about 4 months ago


The sound could be a warning that the front wheel bearings are worn out...this should be a free inspection at your local brake/suspension/muffler repair shop...the bearing seals can deteriorate, and allow foreign objects (small dirt) to be exposed to the bearing...Please have this checked...the grinding probably increases with speed...the faster you drive...Hope this helps.

Mar 21, 2012 | 2004 Kia Sorento

1 Answer

My daughter has a 2006 nissan sentra about 6 months ago she hit a curb with the front passenger side tire we replaced the tire rim but its making a loud humming noise any advise would be greatly...


That loud humming noise you are hearing is the wheel bearing. After hitting the curb the bearing took a hit and became a little wobbly and over time the grease has seeped out and started causing the humming.So just replace the wheel bearing and anything else that might be loose or damaged like the tie rod and ball joints. if those issues are not corrected it might happen again down the road. good luck and glad to shed some light on your issue

Aug 02, 2011 | 2006 Nissan Sentra

1 Answer

Shaking when driving. bought new tires in front 18 months ago. bought the car 3 years ago it was already lowered bought back tires six months ago had alighned two months ago started shaking after and tires...


get under the vehicle (use ramps) and check all linkages for movement pull push on the anti roll bar links, pull push on steering rack and pinion and linkages, any excessive movement, jack each wheel at a time, using a bar check the lower wishbone joints for movement, get the bar in the gap between the wishbone and lower part of the shock. and pull down, if any movement in ball joint up and down replace. while wheel on vehicle check for movement in bearing you will feel a tiny amount not much but pull and push on wheel with opposite hands on 12 o'clock and 6 o'clock and do the same at 9 and 3. now with both wheels off the ground but with the tyres still on, have some one holed one wheel and push pull on wheels each side there should be even movement between both wheels, if everything is fine with the the steering linkages and this dose not feel or sound right then this could be the problem also to add if the inside and out side of the tyres are wearing then the tyre pressure is wrong and needs adjusting to the right tyre pressure .

Jul 24, 2017 | 2000 Ford Mustang

1 Answer

Steady noise from rear wheels (or possibly left side only) when driving


It is the rear bearing. I replaced driverside 1 year ago and then the passenger side 6 months ago. Looks like water entered the sealed bearing and there is rust. It is a common problem! Dealer was out of stock so I bought the part at NAPA ...little cheaper. You need some skill to replace it. If you want to attempt it I can describe it more! Its about a 500 buck repair at the dealer.

Jan 27, 2010 | 2006 Lexus Rx 330

2 Answers

I have some either brake rotor or front wheel bearing issues? how do i tell the difference in a rotor issue or wheel bearing issue? i have some noise coming from my front drivers wheel, i took the pads off...


no recalls that I know of, but you can always call the dealer, give them the VIN number and they can tell you of any outstanding recalls.. if you have thep ads off in your hand an spin the wheel and you hear grinding noises, then I would say the bearing is bad.

Oct 01, 2009 | 2006 Dodge Ram 1500

1 Answer

2001 Impala Traction - ABS problems.


Is it the frt wheel sensor setting code again? If so I would check the connectors at wheel bearings I found most often terminal tension weak need to tighten or replace harness

Sep 10, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...