Question about 1992 Mazda MX-3

1 Answer

How to change rear break light of mazda autozam? We are having trouble in removing the rear light.Help please.Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove some of the casing around the whole rear lighting panel (casing) and also corresponding screws. On top ( just in the middle) of the lighting panel there is a small rectangular space and inside has a kind of circular head connected to it. Using a Screwdriver a sort of a lever, gently insert it and try to pop that circle out by pulling/lever the screwdriver handle to the direction of the car side ( ie: right light panel pulling to the right-side of the car) this will make the whole lighting panel pop out, you can turn the whole panel now and expose where the bulbs are connected to the lighting panel. Unscrew the cover and then you can just pop the broken bulb out like an Edison type of bulb.

Posted on Apr 12, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

martin538
  • 117 Answers

SOURCE: rear break removal from a 2005 mazda tribut

You may need to push the pistons in slightly to allow the brake pads to clear the rotor.

Posted on Apr 08, 2009

  • 1 Answer

SOURCE: changing rear brakes on 1998 mazda B4000

make sure your brake adjuster is backed all the way off then gently tap all the way around the back to remove

Posted on Apr 10, 2009

  • 632 Answers

SOURCE: Hi I need a manual to print off for a Mazda

If you live in the US the only free source would be your public library for your vehicle repair manual. It will not be the official factory but an equivalent such as Clymers or Chilltons. Try your luck in car forums specific to your ride. But uploading someones manual for free seems a wish full thinking

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Firing order Mazda eunos 30x


Australian version, also called Mazda MX-3 Precidia, Eunos 30X, Eunos Presso, Autozam AZ-3, Mazda AZ-3.

On 1.8L (K8) and 2.5L Engines Firing order: 1-2-3-4-5-6 Distributor rotation: Counterclockwise
Hope this helps.

Jun 05, 2012 | Mazda Eunos Cars & Trucks

1 Answer

Mazda 6 sport sedan break lights not working after hid light conversion


Instructions Open the rear deck lid on the Mazda 6.Carefully remove the plastic finishing cover from the license plate light housing, using a small flat-head screwdriver to release the locking tabs. Pull the cover downward and off of the deck lid, exposing the license plate bulb.
Remove the old light bulb from the license plate bulb socket by hand. Wrap your new one in a paper towel and do not touch the bulb with your bare fingers. Insert the new bulb into the light socket. Install the finishing cover onto the light housing and push it upward until it clicks and locks into place.
Repeat Steps 2 and 3 to complete the LED light conversion on the opposite side of the deck lid. Test the new bulbs by turning on the headlights on the Mazda 6.
Mercedes Parts.






May 25, 2012 | 2004 Mazda 6

1 Answer

I have a 1998 Mazda Protege and when the headlights are on all lights work including the rear tail lights. When I press the break pedal the 2 rear lights go out completely except for the center (window)...


It is very likely that you have a bad break switch. It is usually located on a bracket right behind the brake pedal bar. A new switch is generally $30 to $45, and only takes a couple of minutes to change.

I hope this helps.

Jan 27, 2011 | 1998 Mazda Protege

1 Answer

Rear brake light out


First of all check the brake light fuse on the fuse box marked brake/rear lights.
Please use the voltmeter range in your multimeter to check for the voltage on your rear light assembly while the brake pedal is kicked. If there is supply then the lamp is faulty , the ground to the lamp assembly is faulty. remove the assembly and check holder of lamp .
If there is no voltage then the brake fluid pressure switch is faulty or there is break on the wire to the switch or to the rear assembly.

Jan 22, 2011 | 2008 Mazda Mazda3 Hatchback

1 Answer

Hi I need a manual to print off for a Mazda 1995 Autozam AZ-3 vehicle please. Thanx Venus venom.1969@hotmail.com


If you live in the US the only free source would be your public library for your vehicle repair manual. It will not be the official factory but an equivalent such as Clymers or Chilltons. Try your luck in car forums specific to your ride. But uploading someones manual for free seems a wish full thinking

Apr 30, 2010 | 2006 Mazda MazdaSpeed

2 Answers

Ignition wiring diagram Mazda B2000 1986


my 88 mazda b2200. none of the lights or fuel pump come on when i turn the key over, but i know the wires aint hooked up. im just trying to figure out where they are located

Mar 25, 2009 | 1988 Mazda B2200

1 Answer

2002 Buick Rendezvous - Rear Wiper, Back Up & Rear Plate Lights


look for rear wiper fuse and relay.because both circuits is tie together . look in glove compartment for the manual .it will show where all fuses and relays located.

Mar 17, 2009 | 2002 Buick Rendezvous

1 Answer

How to replace rear lights


hi sushil from the uk try this ? if you check inside boot directly behind the lights you may find either a clip in inspection cover ? or carpet lining ? covering the lamps? pull/remove the cover to gain access to rear lamp/s then look at where bulbs fit? they will be either on their own bayonet plug for each bulb or all on a master plate of plastic which is removed complete with all bulbs by pressing a clip and withdrawing the assy? re assemble in reverse most uk cars and foreign cars have this type of rear light clusters please come back with update hope fully success? or if you req more help? merry xmas from UK

Dec 12, 2008 | 2002 Mazda Protege

4 Answers

1990 Mazda Miata, Tail lights, Interior lights not working! :\


I have a problem with my tail lights in my mazda. Brake lights working great but the light that supposed to be working during night time are not. By the way the front lights are working too! Also the light of the panel inside is not working. Can anyone please tell me how to fix it?
Thanks alot in advance!

Sep 06, 2008 | 1990 Mazda MX-5

Not finding what you are looking for?
1992 Mazda MX-3 Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...