Question about 1997 Mercury Grand Marquis

2 Answers

The wind shiels wipers stopped working and we dont know what it could be

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 166 Answers

Open hood an listen for wiper motor workin an turning it on and offf . if u can hear it then check the arm that bolts directly to motor,they sometimes loosen up causing splines to disengage therefore not turning arms.if u cant hear it then u could have a pwr loss to motor whether its a switch(wiper) or chek pwr to motor if it has pwr an ground then most likely faulty motor

Posted on Apr 09, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,654 Answers

There are onlyy three things, check fuses, check the switch by wiggling it or check and make sure the motor is not bound up or the linkage has not come apart under the hood. You caqn try turning them on and then manually lifting on the wiper to see if it will start moving again. May be a weak motor.

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 pt cruiser front wind sheild wipers wont stop going.. how do i stop them?


Sounds like the relay or switch is bad. Just find the correct fuse for the wipers(will be marked on inside panel cover) and remove it. There is just the switch, the fuse and wiper relay in that system. So it turns on but not off, but works. So there is power from the switch and the fuse is good or it will not work and the relay lets it turn on but not off. Try putting it on a delay mode, if it does not work more than likey it is the relay. I know it is a hit or miss issue but that is cheaper attempt than replacing the switch assembly.

Feb 11, 2015 | 2006 Chrysler PT Cruiser

2 Answers

2000 toyota camry windshield wipers won't work


First I would look in the fuse box by the driver side and check the fuse,if good then get a meter and see if power is going to wiper motor,if so,then wiper motor is bad,if no power is going to motor,then bad switch,here's a link to see. Repair Guides Windshield Wipers And Washers Windshield Wiper Motor...

Windshield Wiper Switch

Print
REMOVAL & INSTALLATION
The windshield wiper/washer switch is part of the Combination Switch Assembly. Refer to Turn Signal/Combination Switch services procedures.

Oct 18, 2014 | 2000 Toyota Camry

3 Answers

Why do my windshield wipers only work on high speed and when turning them off they stop where ever they happen to be, not going all the way down?


could be the motor wiper or the wiper control module first unplug electrical conector at the wiper motor, clean both the elect. connector and the motor connections as well, if this dont fix the problem you will have to change your wiper control module.

Oct 09, 2014 | 1995 Mercury Grand Marquis

1 Answer

When operating vechicle when using rear defroster wind shiel wipers and the fan rpms drop What is the problem


It depends on several factors. The rear defroster draws a huge amount of power from the charging system just like the blower motor does. So if everything is working correctly, it can be a normal thing. The alternator will not make enough power to cover the draw at idle when the other accessories are being used, but should at cruising speeds.

Jul 29, 2014 | Cars & Trucks

1 Answer

1994 2.0 jetta flashers come on for no reason. when engine is running you turn the steering wheel and the horn beeps. turn on the wind shiel wipers and the horn beeps


have the multi function switch tested. you may have a bad ground in it (horn works by routing to ground which makes it a good source for a short.

Feb 17, 2011 | Volkswagen Jetta Cars & Trucks

1 Answer

2001 avalon winshield wiper motor location and wiper regular location . Wipers dont work all the time after last freeze here


check the fuses under the dash and under the hood

failing that go to auto zone they can show you the location and quote the parts price too
remem ber to turn on wipers and turn on ignition dont start the car look under hood listen for winding noise locate noise locate wiper motor

if making wiring noise remove and re conect wiper arms inside as they are prone to poping off if over loaded like when frozen to wind screen they pop the conector rather than burn the motor out ]

Jan 16, 2010 | 2000 Toyota Avalon

1 Answer

2001 dodge intrepid wind shield wipers not working


There is a Fuse for the Wipers on the Box inside the Car. There actually could be one in the Relay Fuse Box under the Hood also. This box Shoud be on the Drivers Side up torwards the Firewall of the Car.

Jan 25, 2009 | 2004 Dodge Sprinter

1 Answer

Wind shield wipers stop in center of window


Sounds like a linkage (wiper transmission) problem. But, put an external ground wire to the wiper motor first and see if they work then.
Also many wipers have a fastening nut on the wiper arm where it attaches to the stub that goes through the body. These may have loosened and gone out of adjustment. If so, loosen them and re-position arms, then tighten them down.

Dec 16, 2008 | 2006 Kia Sorento

Not finding what you are looking for?
1997 Mercury Grand Marquis Logo

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...