Question about Plymouth Voyager

1 Answer

I need to put the belt on my van its the power steering

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,399 Answers

Thanks for choosing FixYa and welcome to the site. You are talking about the serpentine belt. At the bottom of the belt, you should notice your crank pulley. Usually, there will be a square in the middle. This will be where you loosen the belt at. You will need a crescent wrench, a large one. You can use the stub on the wrench to put it in the pulley. Then you will need to pull the wrench to the left. It may be the right, but it will go one way. This will release the belt tension and it will allow yourself to change the belt. Don't forget to take a visual picture of the belt so you know how it goes back on. If you have any questions, feel free to ask and thanks for using FixYa.

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing diagram for 1984 Chevy G20 van 5.0 with multiple belts


first is alternator/ water pump/ crank... second is power steering and smog if equipted.. last is ac compressor..

Feb 24, 2013 | Cars & Trucks

1 Answer

Loud grinding noise when I turn my steering wheel to the left and right


sound like a CV shaft,now you need to figure out which one LorR

Feb 07, 2013 | Cars & Trucks

2 Answers

Need serpentine belt routing diagram for 1994 Dodge grand caravan


3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 21, 2010 | 1994 Dodge Grand Caravan

1 Answer

Power steering belt diagram needed


Below is the diagram you requested. The drive belt also drives the power steering pump.
5bdff5c.gif

Oct 30, 2009 | 2000 Chrysler Town & Country

1 Answer

Power steering pulley on ford escort van 92 has


you will need power steering pully puller you can rent them at most of your local part house or you can buy them there you will need to pull of belts then the pully hope this helps

Sep 28, 2009 | 1992 Ford Escort 4 Door

2 Answers

Why does my van squeel


You didn't say what type of pump was replaced, water, power steering, or ??? 
If it was the power steering pump you may be low on fluid or the belt is not tight enough. If it was the water pump it still may be the power steering belt was not tighten enough.
Go to www.youtube.com, type in power steering belt and select the appropriate video and it will show you how.

Mar 06, 2009 | 1998 Dodge Caravan

1 Answer

Power steering


Your van has a serpentine belt, it not only operates the power steering, it also operates the alternator, and the water pump.I wouldn't drive it until that belt is on it, it will over heat and do other damage.

Jan 27, 2009 | 1998 Dodge Grand Caravan

1 Answer

POWER STEERING BELT REPLACEMENT 1997 VENTURE VAN


small chilton book for your car should run about 6 dollars at the parts store ,, its a easy job ,, one belt runs everything and its released by a tensor pulley

May 16, 2008 | 1997 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...