Question about 1997 Chevrolet Camaro

2 Answers

Squealing noise stops when i push in clutch pedal we were on the interstate and suddenly i had no clutch pedal we got off the street it was hard to get it out of gear i checked the fluid it was fine started the car back up clutch was not to bad turned around & headed for home it did it again almost wasn't able to stop the car couldn't get it out of gear the car stalled & jerked as we tried stop we tried to push car out of road couldn't move the car it wouldn't start let it sit while waiting for help & was able to start car & move it out of road it was jerking & was a loud knocking sound

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 155 Answers

Sounds like a bad Throw Out Bearing.. Needless to say.. it has to be repaired.

Depending on mileage.. may as well replace the clutch/pressure plate.. and have he flywheel looked at.. change the tranny oil.. check the u joints.. rear end etc..

Best of luck!

Posted on Apr 09, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 166 Answers

Sounds like u lost pressure in ur hydraulic slave cylinder. chek fluid level in clutch master if fluid is full then u lost clutch master pressure. clutch master bad. sqealing noise would most likely b a worn or faulty throwout bearing. they usually make noise exactly like u described.

Posted on Apr 09, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bad squealing noise that happens, sometimes when I turn on the car,and randomly wjen it hasn't had time to warm up properly.


Tighten all the belts and if it still makes noise Its possible that it's the throw out bearing

Jan 02, 2016 | 2007 Kia Spectra

1 Answer

I have a 2003 subaru baja (no turbo) and while driving on the highway had to almost come to a complete stop due to a sudden accident in front. since then I have a whining/grinding like sound when I press...


If you are driving and you put the vehicle in neutral and coast, push the brake pedal and NOT the clutch pedal and see if the noise is still there. If the noise is there, then you will need to get your brakes checked out. If the noise only happens when the clutch is pushed in, then your clutch release bearing might have something wrong with it. I hope this info helps.

Mar 23, 2015 | 2003 Subaru Baja

3 Answers

The clutch was having a hard time going into gear.All of a sudden there was a high pitched squeal/scream coming from the transmission area.


that sounds like a throw out bearing failure-is there any adjustment at the slave cylinder-it may be holding the bearing against the clutch and causing the noise-this thread may help-http://www.jeepforum.com/forum/f9/how-change-bleed-clutch-slave-cylinder-511531/- cheers Denny

Dec 22, 2013 | 2000 Jeep Wrangler

1 Answer

Cannot depress clutch


may need a new one or ajust--bring it to a specialist or honest mech-not a dealer

Aug 17, 2013 | Ford Mustang Cars & Trucks

1 Answer

When coming to a stop, the brakes work fine until I get almost stopped, then the pedal will push down further and brakes will come on hard, and stop vehicle hard, what could be the problem?


Sounds like your master cylinder is bad on your brake system. If you are stopped in your driveway(not on the street) leave the vehicle in park. Start the car and place your foot on the brake with light pressure and keep this pressure on the pedal. If the pedal continues to drop slowly to the floorboard your master cylinder is leaking past the primary piston in the master cylinder. If this is the case have this repaired immediately. Your brakes could just all of a sudden not be there the next time you apply them when you need to stop.

Apr 05, 2012 | 1995 Buick LeSabre

1 Answer

Hello. i have the ff. problems with my 1994 honda accord manual: 1. the engine dash "orange" light on and cant find solution from local mechanics: 2. engine rpm is 1300 when starts and 800 rpm...


first engine light is on a reason it has a code stored needs to be read,2.sounds like it needs throttle body cleaning,and3.if clutch is hard means master clutch cyl is bad if hydraulic and if manual cable is worn.











TIM...

Dec 02, 2010 | 1994 Honda Accord

1 Answer

Clutch makes a squealing noise


Hello;
The throw out bearing is going oout. The reason you hear the squeal when you push in the clutch is that is when the throw out bearing spins up. Rest of the time it does not spin.It is irratating, You should replace the entire clutch assembly when you replace the throw out bearing. Hope this helps, rate me high.
Thanks;
Rich
RPM Northwest

Feb 02, 2009 | 1998 Dodge Dakota

Not finding what you are looking for?
1997 Chevrolet Camaro Logo

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...