Question about 1984 Ford Bronco

1 Answer

Cranks runs good but wont crank after running a while then cools down and cranks it does not turn over on speed till it sets a while what could cause this

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 72 Answers

It sound like you have a bad starter. When it is hot, it is drawing more amps than the battery can supply. You may also need to test the positive cable to the starter from the battery. To do this, you need a multimeter. Check the voltage between the positive and negative cable at the battery and note your readings. Then measure the voltage at the starter between where the cable connects and the case of the starter. Compare the two reading. If you have more than .5 volts difference, then the positive cable has too much resistance and needs replacing. Check for corrosion and make sure the cable is tight as well. I am betting on a starter though.
Good luck. Hope this helps!

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Accent starter doesn't crank when engine hot. New battery, new starter. I have to wait 10-15 min and there is no problem???


The problem is usually the crank sensor that is faulty. Run the vehicle till its hot, when the motor does not want to crank, remove sensor pore water on the sensor to cool down, refit sensor. If vehicle starts, purchase new crank sensor.

Aug 06, 2014 | 2001 Hyundai Accent

1 Answer

What is the roaring/humming sound I get when trying to start


I have a 2001 Mitsubishi gallant es it run good then will cut off will turn over but wont stay crunk until cool down then run for 2-3 minutes and will jerk then will cut off

Jul 20, 2014 | 2001 Oldsmobile Silhouette

1 Answer

Wont start when hot


Could be a bad fuel pump,or a be crank sensor.
But please run a scan

Apr 02, 2014 | 1997 Jeep Cherokee Country

1 Answer

1999 Dodge Durango It runs great till you turn it off. The motor turns over fine but it won't crank (no spark) If I let it sit for a few hours it will crank and run fine. Does not run hot but will crank...


problem could be depend on your type ignition system could have bad distributor or crankshaft position sensor. best have vechicle code scan first before buying new parts.

Jul 30, 2013 | Dodge Cars & Trucks

1 Answer

91 cutlas ciera 3.3l v6 backfires then stalls but starts back up


SOUNDS LIKE THE IGNITION MODULE OR COIL PACKS HEATING UP

Sep 12, 2012 | 1991 Oldsmobile Cutlass Ciera

2 Answers

96 Dodge Runs fine but after warms up it dies,cools n will crank n run good then dies again after warming up.


if you dont know anything about cars then take it to a dealer as it will be cheaper in the long run

Apr 08, 2012 | Dodge Cars & Trucks

1 Answer

2000 silvarado 5.3 vortech runs good for awhile after it gets hot it shuts off and wont crank until it cools off


do you mean wont crank over and start till it cools off? if thats the case it sounds like you got a bad crankshaft position sensor,,thge sensor is fine when its cold and warm but when it gets hot it goes open and the cars computer cant see the rpm and shuts the engine off,and then when it cools off the sensor works again and the car starts and is ok till it gets hot again,if thats the case thats what it is,,,hope this helps,,,about $100 for the part

Oct 07, 2009 | 1985 Chevrolet Chevy

1 Answer

Runs fine for approx 15 mins,then stalls out and wont start again


sounds like coil problem, coils will start cold then get hot and stop. when coil cools will crank up and run till it gets hot, try to replace the ignition coil,dont think it would be a crank sensor, try a coil,thanks robert b.

Jun 19, 2009 | 1993 Jeep Cherokee Country

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...