Question about 2003 Ford Mustang

1 Answer

Transmission shifts into reverse nice and smooth...shift into drive and there is no noise nor does it engage at all into drive??? This happened after car was stuck in snow...after shifting from drive and back into reverse, thus rocking the car to get unstuck...car eventually would not engage into drive. Are there sensors that could have protected tranny that needs to be reset...or solenoid kicked out...or maybe worse???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 165 Answers

U should check ur transmission fluid to see if it is dark (burnt) if so ur gonna b outa luck u most likely burnt it up. fluid will also have a strong burnt smell if it is black. trannys build up alot of heat wen trying to get unstuck in snow an ice. diminished air flow through radiator or trans cooler wen stuck also adds more heat to the unit,especially wen running it hard on ice. they get hot really fast

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why the transmissiom won' engage in any gear


Transmission won't engage Drive or Reverse - EricTheCarGuy

www.ericthecarguy.com/.../53999-transmission-won-t-engage-drive-or-r...
This transmission shifted smooth and strong through all gears until today when it stopped all of ... Any idea on where we should start tackling this issue? .... Also, make sure that the pressure tester is not leaking or you will run the tranny dry(use ...

Gear shifter goes from park to drive with no effect. Won't ...


Nov 26, 2015 | Cars & Trucks

1 Answer

1998 land rover discovery transmission makes loud banging noise when shifting from pari to drive?


Tons of possibilities here (transmission, differential, motor mounts, transmission mounts....), so I'll ask some debug questions to help narrow it down. Does it make the noise when shifting into reverse? Also, does it make the noise only when shifting from park, or also when shifting from neutral (into drive or into reverse)? Did the noise start as an occasional, softer noise and get worse over time, or did it start suddenly? Does the vehicle lurch at the same time as the noise? What happens when you go from Reverse to Drive, or vice versa? Has any work been done recently (brakes, tires, alignment, suspension, transmission)?

Jul 20, 2014 | Land Rover Cars & Trucks

1 Answer

Transmission wont engage


Have a look under your car at the shift linkages to the gear box and ensure that they are still connected. If they are and they move when the shift is moved in the car, then you probably need a specialist auto transmission mechanic.

Mar 19, 2014 | 1998 Ford Taurus

1 Answer

What is it when in reverse the automatic transmission on a 1999 Camaro grinds?


Reverse is not "synchronized" forward gears are, so it does make some noise, try shifting to 2nd before engaging reverse to slow gear rotation and limit gear clash or grind.

Oct 08, 2012 | 1999 Chevrolet Camaro

1 Answer

1987 saab 9000 turbo transmission


bad pressure plate or stuck throw out bearing.

Jun 06, 2012 | Saab 9000 Cars & Trucks

1 Answer

Changed starter and now transmission won't engage in reverse. What happened?


is the level of fluid ok ? im afraid your transmission went bad not because of the starter change but it just happen at that time

Jan 10, 2012 | 2003 Kia Sedona

1 Answer

When park on a hill or slope. the transmission makes a loud noise when **** to reverse or drive. but on flat surface it's smooth shifting.


before you return the shifting lever to park on a hilly slope please apply parking brake first then shift the lever to park.now when pulling off shift to drive then remove park brake no loud noise.just my 2 cents

Sep 15, 2011 | 2004 Nissan Armada

2 Answers

98 Civic Auto Trans Slippage


you need to replace clutch pack for that gear can be ordered seperately from parts store or dealer if you want to save money call peach street auto recycling at 1800-365-2341 for a warrantied used one! also might be time for change trans filter and fluid filter could be slightly clogged but I lean towards clutch pack I replace these alot on Hondas

Dec 12, 2008 | 1998 Honda Civic

1 Answer

Tranny failed '96 Grand Cherokee Orvis Edition


I just had to replace the gov solenoid and sensor in trans.Would do same thing ,feel like someone shifted to neutral.

Jul 19, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Ford Mustang Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...