Question about Nissan Pathfinder

1 Answer

I have a diese nissan terrano, all gears work good i am able to put truck into reverse with no trouble at all but it is mission to get back out! from there i have to go back some more or place my foot on brake and load it up by releasing the clutch slightly and at the same time trying to take it out of gear. this normaly works but is getting frustrating

Posted by on

  • lance_beri Apr 09, 2011

    it is a 1991 2.7 turbo diesel

  • lance_beri Apr 12, 2011

    HI there john I have had the clutch assembly out an all appeared? okay would a broken spring be very visable. the clutch it self feelss quiet good

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

What year and what engine, i need to look up what clutch system this one has.

Posted on Apr 09, 2011

  • john nail
    john nail Apr 09, 2011

    what is most likely happening it the clutch disk has a spring loaded center hup, the purpos of this hub is smoth out the clutch release, you have broken one or more of the springs and this causing the clutch to drag and keep holding pressure on the input shaft, in order to cure the problem you will need to replace the clutch assembly.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have problem with my Nissan terrano 2 mechanical gearbox. It's hard to put to 1st gear. From 1'st to 2nd, 3rd, 4th, 5th, are also hard. Is it necessary to change clutch?


not a clutch problem unless you have just done a clutch kit change
more likely a hydraulic clutch problem ( air in the system) or master cylinder needing replacement .
if it is a cable operated clutch , replace the clutch

Dec 14, 2016 | Nissan Cars & Trucks

1 Answer

I was wondering if you can help me out, I have a 1992 Nissan Terrano 3Lt V6 4x4, its just an old farm truck, Well today I was driving it down the paddock and all of a sudden it wont move in any gear,...


If it is an automatic, and absoloutely no movement it sounds like the torque convertor has failed. Either impellor or turbine. If it is a manual the clutch may have gone. If it is a manual, place it in gear and get a friend to rock the car back and forward. See if you notice any movement of the harmonic balancer/belts in the engine bay?

Jan 24, 2011 | 1994 Nissan Pathfinder

1 Answer

Terrano gearbox keeps jumping out of overdrive and


Nissan Terrano's have an Electronic Computer that controls the gearbox. It is hidden behind the left hand rear Speaker box, right hard up against the rear seat back rest. This system controls all functions regarding the gearbox and it's rev rates. If your vehicle is shifting back on long drives then it is possible that the computer sees any slight increase in revs as a desire to "Kickback" the gearbox to a lower gearing, hence it dropping out of overdrive. Unfortunately a gearbox specialist with a computer "Plug-in" is needed to fix this, but it is fixable. This problem should not be too expensive in comparison with a new gearbox.

Mar 16, 2010 | 1992 Nissan Pathfinder

1 Answer

I have a 06 altima and it doesnt go in park it stays in reverse..on the gear shift its in park but on the dash it says reverse..help?


sounds like a rod or cable out of sync good place to look is under hoon on trans mission you might need to put on hoist!!! could be in sterring colum linkage??

Dec 23, 2009 | 2006 Nissan Altima

1 Answer

Nissan terrano accelerator button, whats it do??


this is the kick down for the auto trans it kicks back a gear on acceleration

Apr 13, 2009 | 1993 Nissan Pathfinder

4 Answers

Loud diesel knock nissan terrano II head just replaced.


some black smoke comes out when i put foot down and loses power when goiong uphill i have a nissan mistral/terrano 2.7td

Nov 25, 2008 | 1999 Nissan Pathfinder

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...