Question about 1999 Chevrolet Blazer

1 Answer

I have a 99 chevrolet blazer LS it was running fine the drivers side window rolled down but rolled back up extremely slow when i shut it off it wouldnt re-start the battery was dead so i jumped it and it started but the temp. guage quit working,the fuel guage was burried past full,and the digital gear selector and odometer dont light up i noticed that if the ignition switch is in the on position the odometer and gear selector lights work but when i turn the switch to start vehicle they go out and wont come back on also with the vehicle running i can take the key out ive been told the ignition switch is bad but i want another opinion before i start chasing grimlins

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 41 Answers

That is one grimlin that is pretty well cornered your ignition switch is command central for all you listed that was not working properly inside the barrel of your ignition are the contact pins that supplies power to everything that requires power that why when you turn ignition off everything shut down so your battery does not die out .i would say that there is a 99% chance that your ignition is shot.

Posted on Apr 09, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1989 s-10 blazer i put new window switches in the driver side window goes down but you have to wait to go up slow the pasenger side switch wont work at all they have window locks the driver side...


Recheck your wiring, sounds like wiring ins't right to me....Maybe a cut or pinched wire some where....There is a chance the window motors are bad also...I hope you find the problem, my 96 would not roll back up after going down turned out to be the motor on drivers side was bad...Good Luck....

Feb 27, 2015 | 1989 Chevrolet S-10 Blazer

1 Answer

Electric window on drivers side won't roll up


Fuse???...window switch??...or ya need a new window regulator motor and assembly that pulls window up and down

Start in the order above....

Oct 02, 2014 | 2000 Chevrolet Blazer

1 Answer

Broken window


The Suggested Solutions are provided by the website and may not have anything to do with your issue.
If the window was replaced by a shop, I would take it back and complain. They may have not connected the glass to the regulator, or the motor to the regulator.

Mar 05, 2013 | 1999 Chevrolet Blazer

3 Answers

The driver side window button does not roll the window up or down, but the other windows work fine. Could the problem be in the button or the motor?


Its the window switch. I stopped getting "clicking" action on my driver side/driver window button, so I switched it with one from a back window (meaning I couldnt roll down the back one from the driver side control anymore. This was temporary. I went to the junk yard and of 12 98/99 devilles, all of them had the switch pulled already. It is a pretty common problem I guess. New aftermarket cost around $80. All you need is a screwdriver to get at it, plug in the new one and you are fine.

Aug 20, 2010 | 1999 Cadillac DeVille

1 Answer

Drivers side window stuck, but motor still works, when it rolls down it rolls sideways


Do you mean it tilts foward when you roll it down? If so, Go to chevy dealer and get some new window run channel guides/clips. Very easy to replce if you have some mechanical skills. You can pull the window out on that model without pulling the door panel to replace those guides.

May 30, 2010 | 1994 Chevrolet S-10 Blazer

1 Answer

Driver side power window won't go up on 99 chevy blazer


bad switch or motor
To check the motor the motor has two connections. One for up and one for down. Try hot wiring the connections to check. If it works the drivers switch is bad

Apr 30, 2010 | 1999 Chevrolet Blazer

3 Answers

1999 Dodge Durango driver side window does not roll up nor down.


Remove the door panel and find the window motor Unplug it and using a separate car battery run cables directly to the window motor When you switch the polarity the motor will either bring the window up or down or if noting happened change the window motor and window regulator assembly.

Jun 08, 2009 | 1999 Dodge Durango

1 Answer

Driver door on 2006 chevy equinox


check the fuse to the driver side window.

Apr 25, 2009 | 2006 Chevrolet Equinox

1 Answer

99 s10 blazer keeps shuting off?


Need more info........how many miles on vehicle? Any recent work done on it? What engine?

Off hand.......sounds like a fuel pump problem located in the tank.

Nov 18, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75824 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...