Question about 1990 Toyota Celica

2 Answers

I need a diagram of wiring harness from fuse box to ignition

Posted by on

  • 1 more comment 
  • Anonymous Aug 24, 2008

    I need to install a new ignition, what do I do

  • wirep Dec 14, 2008

    I have a 2008 Toyota Sennia. The power door lock will not work from the door, only from the remote or the key in the door. The door lock fuse is good.

  • 289yota Apr 23, 2009

    the key will not tearn at all

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The key won't turn because the steering wheel is locked before you try taking the key out turn the wheel right as your wheel is to the right you will rotate your key then you will hear a click then let go of the wheel and your key will get released

Posted on Jul 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1990 toytoa celice need to changes fus box how do I do it

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Foxguard jp2 immblsr on triumph stag will not de activate or go into service mode.Ignition switch operates as normal but dash lights stay off wipers and washers dont work .


Your half way there. All you need is a wiring diagram to trace the wire from the ignition to that fuse. Most likely it is one wire from the ignition, then it splices to the different fuses. In my experience the splice fails(corrosion), Some times you loose one area, some times all. Depends on which side of the splice is corroded the most. Splices are hard to find. Even harness diagrams can be as much as 2 feet off. I usually find the color code of the wire and run a new wire. In your case, it would be from the ignition switch to the fuse panel.

May 08, 2016 | 1977 Triumph Stag

1 Answer

Specifically I'm trying to identify the wire on the spark plug coil assembly to which I should connect the signal wire of a Tachometer to. The wire colours are, red, yellow, green/white, and blue.


It says the tachometer wire is Yellow/Green, you do not have that listed. You will find it in the list below, it is highlighted..

WIRING INFORMATION 2001 Subaru Legacy






WIREWIRE COLOR LOCATION

12V CONSTANT WIRE WHITE Ignition Harness

12V IGNITION WIRE GREEN Ignition Harness

12V ACCESSORY WIRE YELLOW Ignition Harness

STARTER WIRE WHITE/BLACK Ignition Harness

POWER DOOR LOCK (-) WHITE Harness In Driver's Kick Panel

POWER DOOR UNLOCK (-) GREEN/RED Harness In Driver's Kick Panel

PARKING LIGHTS (+) ORANGE At Light Switch

DOOR TRIGGER (-) PINK/BLACK In White Connector Behind Fuse Box

TRUNK TRIGGER (-) YELLOW/BLUE In White Connector Behind Fuse Box

TRUNK RELEASE (5-wire) LT.GREEN/YELLOW At Motor In Tail Gate

FACTORY ALARM ARM (-) Factory remote only

FACTORY ALARM DISARM (-) Factory remote only

TACHOMETER YELLOW/GREEN At Ignition Coil

BRAKE WIRE (+) WHITE/BLACK At Brake Pedal Switch

HORN TRIGGER (-) RED/GREEN Harness At Steering Column

LEFT FRONT WINDOW UP BLUE/RED At Driver Window Motor Inside Door

LEFT FRONT WINDOW DOWN BLUE At Driver Window Motor Inside Door

RIGHT FRONT WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

RIGHT FRONT WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door

LEFT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

RIGHT REAR WINDOW UP BLUE/RED Harness In Driver's Kick From Driver Door
RIGHT REAR WINDOW DOWN BLUE Harness In Driver's Kick From Driver Door

Feb 07, 2016 | 2001 Subaru Legacy

1 Answer

2002 elantra no power to wipers radio head lights and heat


Please check for codes in the OBD system. Check Battery and Charging System. If no codes perform following test procedure.
Tests/Procedures: 1. Check the Black power connector in the under dash fuse box. Wiggle it with the lights on and see if they malfunction.

2. Wiggle the wiring harness from the ignition switch around the steering column with the lights on and see if they malfunction.

3. Monitor the key on battery voltage from the ignition switch at terminal 3, Red wire at the ignition switch to terminal 3 of connector I/P-E in the under dash fuse box.

4. See if the vehicle has any aftermarket accessories installed that may be tapped into that Red wire from the ignition switch to the fuse box.

Potential Causes With OEM Direct diagrams, components, TSBs, and R&R procedures
Ignition Switch
Output Speed Sensor (OSS)
Power Connector
Radio Wiring
Steering Column Wiring

Apr 07, 2015 | Hyundai Motor 2002 Elantra

1 Answer

I need to no where the red wire from computer goes on fuse box ( had new harness installed and was told the red wire from computer goes to fuss box


Typically the red wire is a Positive voltage wire. If you were told the wire goes to the fuse box, you should get a wire diagram for the wire harness. On the diagram it should show connections marked with numbers and possibly colors. The computer on the wire diagram should show a red wire marked Vcc or Positive or something like that, trace that wire on the diagram carefully to the fuse box on the diagram, the fuse box on the diagram should be marked with a fuse rating at the location where the wire connects. As long as the fuse rating is the same and it's marked as "ECU" or something similar related to the "engine control unit", that is where you connect it. DON"T put it on any other connection with a different fuse rating, it could damage the computer as soon as you turn the key. this should give you enough info to get it connected and if not you can refer to this to explain to someone else. Good Luck.

Nov 26, 2014 | Cars & Trucks

1 Answer

Fuse Box ( cover) diagram for a 95 Lexus LS 400 is missing.


check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.

Oct 23, 2009 | 2005 Lexus LS

1 Answer

Need brake circuit diagram for 1991 chrysler new yorker


Hi,
1991 Chrysler New Yorker Auto Security Wiring Diagram
Battery Constant 12v+ Positive Wire (+): Red and Pink
Battery Constant 12v+ Positive Wire Location: Ignition Switch Harness

Starter Positive Wire (+): Yellow
Starter Positive Wire Location: Ignition Switch Harness

Ignition Positive Wire (+): Dark Blue
Ignition Positive Wire Location: Ignition Switch Harness

Accessory Positive Wire (+): Black/Orange
Accessory Positive Wire Location: Ignition Switch Harness

Parking Light Positive Wire (+): Black/Yellow
Parking Light Positive Wire Location: In Drivers Kick Panel

Power Door Lock Positive Wire (+): Orange/White Or Orange/Violet
Power Door Lock Positive Wire Location: In Drivers Kick Panel

Power Door Unlock Positive Wire (+): Pink/Violet
Power Door Unlock Positive Wire Location: In Drivers Kick Panel

Door Trigger Negative Wire (-): Yellow
Door Trigger Negative Wire Location: In Drivers Kick Panel

Dome light Supervision Wire: Use Door Trigger (Requires Relay)
Dome light Supervision Wire Location: N/A

Trunk Release Positive Wire (+): Black/White (Requires Relay)
Trunk Release Positive Wire Location: At Trunk Release Switch

Horn Negative Wire (-): Black/Red
Horn Negative Wire Location: At Relay In Fuse box

Tachometer Wire Negative Wire (-): Black/Gray
Tachometer Wire Negative Wire Location: At Ignition Coil

Brake Light Positive Wire (+): White
Brake Light Positive Wire Location: At Switch above Brake Pedal

Factory Alarm Disarm Wire (-): Light Green/Orange
Factory Alarm Disarm Wire Location: In Drivers Kick Panel

Factory Anti-Theft System: N/A
Factory Anti-Theft System Location: N/A


Thank You for contacting Fixya.com

Aug 03, 2009 | 1991 Chrysler New Yorker

1 Answer

Need diagram for 2007 escape audiophile


if it is the wiring diagram for the Escape you need, here it is:

12 VOLT CONSTANT Connect to BATTERY ONLY STARTER TAN/LIGHT BLUE (+) IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 LIGHT GREEN/PURPLE (+) IGNITION SWITCH HARNESS IGNITION 2 N/A IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 BLACK/LIGHT GREEN (+) IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 N/A KEYSENSE N/A PARKING LIGHTS ( - ) WHITE/BLACK (-) @ SJB, Connector E, Pin 4, See NOTE *1 PARKING LIGHTS ( + ) BROWN (+) @ SJB, Connector C, Pin 19, See NOTE *1 POWER LOCK PINK/WHITE (1-Wire System) See NOTE *2 @ SJB, Connector D, Pin 22, See NOTE *1 POWER UNLOCK Same wire, See NOTE *2 See DIAGRAMS DOOR TRIGGER PINK (-) @ SJB, Connector C, Pin 28, See NOTE *1 DOMELIGHT SUPERVISION USE DOOR TRIGGER TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN YELLOW/LIGHT GREEN (-) @ SJB, Connector A, Pin 14, See NOTE *1 TACH NOT RED or WHITE/RED @ IGNITION COIL or FUEL INJECTOR WAIT TO START LIGHT N/A BRAKE LIGHT GREEN (+) @ SWITCH ABOVE BRAKE PEDAL FACTORY ALARM DISARM DARK BLUE/LIGHT GREEN (-) @ SJB, Connector D, Pin 3, See NOTE *1 ANTI-THEFT FORD'S SECURILOCK ANTI-THEFT TRANSPONDER SYSTEM TRANSPONDER @ IGNITION SWITCH TUMBLER EXTRA INFORMATION NOTE *1 The SJB (Smart Junction Block) is the FUSE/RELAY BOX on the PASSENGER SIDE of the CENTER CONSOLE. NOTE *2 This vehicle uses a 1-Wire Door Locking System, LOCK requires a (-)Negative thru a 1000 Ohm Resistor and UNLOCK requires a straight (-)Negative

Jan 06, 2009 | 2005 Ford Escape

2 Answers

Installing stereo had to put a wiring harness wired it all up red 12volt wire comes separete needs to hook up to ignition i do not know where it goes


Use a 12 volt test light & probe wires in harness from original connection, on feed side .Find a wire that only has power when you turn the key on. That's the one you'll connect that wire to.

Dec 26, 2008 | 2006 Chevrolet Colorado

2 Answers

I am installing an after market stereo deck into a 2004 Chevy Cavalier but I am not getting any power. From my research I need to hook the deck up to the vehicles ignition harness but I do not know where...


ok now this is fun i had a good ole time putting my after market raidio in on my 04 with out the $300 harness that the sterio shops wanna charge a arm and a leg to install you need to run your 12v power source to the igniton fuse its farly simple if you need picture diagrams i can deffianatly post some pictures showing you exactly how to wire it up bc trust me i was mad enuff trying to get my stereo in so i wouldnt mind helping some one else out on getting it installed bc its frustrating not knowing how to do it

Jul 19, 2008 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
1990 Toyota Celica Logo

690 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...