Question about 2004 Mitsubishi Endeavor

Open Question

How do you remove the rear rotors of a mitstubishi endeavor

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mcgyver468
  • 710 Answers

SOURCE: Can't get rear rotors off...

there should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to push the rotor away from the backing plate.

Posted on Apr 22, 2009

Ad
  • 333 Answers

SOURCE: HOW TO CHANGE REAR ROTORS ON A 2004 MITTSUBISHI ENDEAVOR

Take the wheel off.

Remove the two 14mm bolts holding the caliper bracket on.
They are the two farther inboard, behind the hub.

Slide the caliper and its bracket off the rotor and support it so you do not strain the brake hose.

Slide the rotor off.

If the rotor is stuck/rusty, you take take a hammer and tap on the hub section of the rotor to loosen it.

Posted on Sep 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are the bolts to remove the front rotors on a 2004 mitsubishi endeavor reverse threaded


never seen left handed threads on a brake disk ,use a impact driver as they are tight to remove and if that doesnt move them drill the head off ,the wheel nuts will hold it all in place ,some cars like fiats do not even have a retaing screw

Mar 23, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Rotors


You have to obviously remove the tires, then remove the brake caliper by taking to 2 bolts off that hold the calipers onto the hangers. Once the calipers are off the rotor should come right off.

Apr 02, 2010 | 2006 Mitsubishi Endeavor

2 Answers

HOW TO CHANGE REAR ROTORS ON A 2004 MITTSUBISHI ENDEAVOR


Take the wheel off.

Remove the two 14mm bolts holding the caliper bracket on.
They are the two farther inboard, behind the hub.

Slide the caliper and its bracket off the rotor and support it so you do not strain the brake hose.

Slide the rotor off.

If the rotor is stuck/rusty, you take take a hammer and tap on the hub section of the rotor to loosen it.

Sep 12, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Trying to remove the front rotors that is securing the rotor to the wheel assembly. Need to know the name of he tool that release the philip head screw. Mitsubishi Endeavor 2004


If you can see the head of this screw, drill it out and retap the threads with M8 x 1.25tpmm. Due to the heat these seize often.
It best to use a depth stop set at 12mm below surface to prevent possible damage to the hub or bearings. Manual Hammer driven impact drivers are often effective and sold by harbor freight cheap.

Jun 27, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Can't get rear rotors off...


there should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to push the rotor away from the backing plate.

Apr 22, 2009 | 2004 Mitsubishi Endeavor

1 Answer

Changing front brakes on 2004 mitsubishi endeavor


if you have floating rotors in the front then no.

But if you have locking hub units in the front then yes the bearing will have to come apart.

But if there is only one nut and you can see the threads through the wheel then no you have floating rotors, and sometimes are rusted to wheel bearing and are a pain to get off. Call the parts department and ask whether these are floating rotors or not. This will clarify everything

Mar 03, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Im trying to install a new rear hub assembly and cannot get the rotor off. Any sugestions.


Remove the rotors. Rusted rotors will most likely stick to the car due to the iron oxidizing and bonding to the mount of the wheel. If this happens, you are going to need a little force to remove the rotor from the wheel. With the car properly secured, get a single-hand sledge mallet (rubber preferably to protect the rotor). If you don’t have a rubber mallet, use a block of wood to absorb direct hits. Start at the top of the rotor and tap the edge of the rotor gently as you move clockwise around the rotor. Once loose, remove the rotor from the car.

Feb 17, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2004 endeavor


Remove Endeavor Rear Panel

On the side panel there is a cargo hook with a 10mm bolt. Take that bolt out. On the floor panel there are 2 cargo hooks -- also 10mm. Take them out and remove floor panel. Fold seat forward and you should have access to 5 or 6 bolts -- also 10mm. Remove them then pull the panel out slightly and disconnect the cig ligthter and that should solve your issue.

Jun 21, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

696 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...