Question about Chevrolet Malibu

1 Answer

I'm told I need to replace the PCV valve on my 2008 Malibu. Where is this located and how do I change it out?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

There should be a hose between the crankase and the air cleaner folow that hose and you should find it

Posted on Apr 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WHERE IS LOCATION OF PCV VALVE ON 07 MALIBU 2.2L ECOTEC ENGINE ?


Usually in valve cover...will have slightly bigger hose coming off of it

Jul 05, 2016 | 2007 Chevrolet Malibu

1 Answer

Where is the pcv valve on a 2008 Lincoln mkz


It's located in the valve cover closest to the fire wall .
Rotate counterclockwise and remove the PCV valve from the valve cover.
  • Discard the PCV valve.
  • For installation, make sure the PCV valve electrical connector is pointing in the correct position to allow the wiring harness to be connected. Incorrect installation would require removal and replacement of the valve.

Dec 22, 2015 | Lincoln Cars & Trucks

2 Answers

When shouldpcv be changed on 2008 ford edge


If you are able, get a original part and change it following the services / warranty list of parts, that the dealer change according the miles. If you buy the PCV in a regular auto store; more frecuently, maybe half the time. Hope this helps. Take care.

May 15, 2014 | 2008 Ford Edge

1 Answer

Location of pcv valve on 2008 ford taurus 3.5


On 3.5L engines, the PCV Valve is located on the rear valve cover (see pictures bellow). Please note: the PCV valve must be replaced if it's removed. Access to the valve is easier if you remove the upper intake manifold. However, this is not absolutely necessary and if you are already a little mechanically inclined you can do it the way you would replaced any other PCV valve.

    -A 19mm open wrench will make your life a lot easier if the PCV valve is a bit tight. It is in an awkward spot to apply pressure.

    -Disconnect the electrical connector from the valve. There is a small pin or locking device on the wire that you will have to slightly depress for the connector to release.

    -Disconnect the hose from the valve and turn the hose clockwise so that you have a bit of room to work with.

    -Turn the PCV valve counterclockwise and remove from the valve cover. Pay close attention to the position of the valve at the point when it is to be removed. The new PCV valve will go in at that same position. Why is this important? It is possible to install the PCV valve facing in the opposite direction. Once the PCV valve in and locked it in place, it damages the locking mechanism. Therefore, if you remove it you will have to throw it away and purchase a new one.

    -You just saved $130 - $150 to have the PCV replaced at the dealership...

location-pcv-valve-2008-ford-taurus-3-5-cgnwdhiy0mxwbb3xg5zhzgxj-5-0.jpg

Apr 07, 2013 | 2008 Ford Taurus SEL

1 Answer

Where is the location of the PCV valve in a 3.5 liter 2006 Chevy Malibu Maxx?


Almost all PCV Valves, have been on one valve cover or the other, for
the last 50 years

They never need replacement.

Remove & clean, if you got nothing else to do

Sep 20, 2011 | 2006 Chevrolet Malibu Maxx

1 Answer

Where is PCV valve located on 2008 Mercury Milan 2.3 L I4 cylinder? Do you have a diagram you could send?


On valve cover on almost all vehicles

YOU NEVER NEED TO REPLACE A PCV VALVE

EVER


They have NO EFFECT ON YOUR ENGINES PERFORMANCE

They regulate crankcase vacuum only SO FORGET IT

Aug 06, 2011 | 2008 Mercury Milan

2 Answers

How do I replace the PCV valve on my 2004 Chevy


It is located on top of valve cover. It just pulls out and pushes in by hand. If it is good, the valve inside shoud jiggle around. If it does not move freely, it should be replaced.

You can go to autozone.com and register for full free online repair manual with everything you could ever need for your car.

Oct 11, 2009 | 2004 Chevrolet Malibu Maxx

1 Answer

PCV VALVE REPLACEMENT


The pcv valve is usually located on one of the valve covers look for the larger vacuum hose coming from the intake manifold and follow it you should find it that way. changing it is a matter of sometimes using a pair of pliers to remove a small clamp then rotate back and forth the pcv valve while holding the hose and pulling it away and off.

Jul 02, 2009 | 2003 Chevrolet Malibu

1 Answer

PCV Valve location


It should sit in your valve cover. On the passenger side (if I remember correctly). It should be right on your valve cover with a line that attaches to the top of it.

May 05, 2009 | 2008 Hyundai Veracruz

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...