Question about Hyundai Sonata

1 Answer

Appears like the small wire headlight holding bracket came off of the plastic housing that holds the bulb in place. This occurred when changing the bulb. I can push it back on but not sure if this will shake loose after a while? Is this now damaged or can I possibly apoxy it back on, or maybe even screw it to the housing unit....or ? Seems like the bulb has been replaced often and is worn. Thanks Bill

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 836 Answers

You should be able to epoxy that piece back on, just make sure there isn't a opening into the housing as this will let water in and will burn out the bulb contuinally. That's what seems to been happening as you noticed alot of activity on that light.

Posted on Apr 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change headlight bulb


On the back of the headlight where the wires enter, you should be able to twist and remove the lamp holder. Be careful with the new bulb if it is halogen, do not touch the bulb!!

Apr 13, 2013 | 2000 Hyundai Sonata

1 Answer

How do you change the headlight


On a Newer Vehicle you'll replace the Headlight Bulb
Open the engine compartment hood.

Locate the back of the headlight to determine the lamp and bulb type.
Decide which bulb you need to replace.
Purchase the correct bulb for your headlamp.
Behind the headlight the lamp the socket is removable.
Remove Socket then replace lamp (bulb).
Carefully re-install the socket


On Older vehicles:


Remove the screws that connect the headlamp frame to the
bracket holding the headlamp. Make certain you turn only
the screws that hold the lamp frame, not the adjusting screws.
Disconnect the electrical connector in the back of the lamp
by pulling the socket away from the headlamp with your hand.
Remove the headlight from the bracelet area and discard it.
Replace with the new headlight, making sure that it is positioned
right side up.
Plug the wire socket into the new headlight, which holding the
headlight securely.
Replace the headlight into the frame.
Place the frame onto the headlight bracket.
Reattach the screws to hold the frame and bracket in place.
Do not adjust the setting screws for the direction the headlight
shines.


At night partk in front of a wall and shine your lights on the wall
so see if the headlight shifted during installation.

Jul 14, 2012 | Cars & Trucks

1 Answer

Can you help me change my headlight assembley? i have a 97 200sx SE


1.) Pop the hood to your Nissan. The headlight assemblies are only accessible from the engine compartment.

2.) Clear the area behind the bulb you are replacing. If you are replacing the passenger side bulb, you will need to remove the radiator overflow bottle. The bottle will unhook from its connective tube by pulling it toward the front of the car and up from the ground. If you are replacing the driver's side bulb, you may need to remove the battery. You will do this by unscrewing the positive (red) and negative (black) terminals that connect the battery to the engine, and then lifting the battery straight out of its housing.
3.) Remove the electrical connection on the back of each headlight assembly. This will be a bundle of wires with a wide plug sticking into the back of the assembly.
4.) Unlatch the plastic clip holding the headlight assembly case in place.
5.) Pry the small metal clip holding the bulb using your fingers or a screwdriver. Be careful not to bend, break or damage the clip or the bulb.
6.) Insert the replacement bulb into the headlight socket and reattach the metal clip that holds the bulb in place.
7.) Relatch the plastic clip holding the headlight assembly case in place.
8.) Reconnect the electrical connection to the back of the headlight assembly.
9.) Replace the radiator overflow bottle or the battery, depending on which bulb you replaced.

Mar 02, 2011 | 1997 Nissan 200SX

4 Answers

How to change a headlight bulb in a saturn aura?


Access to change the headlamp bulbs is through the wheel well. The recommended method is to remove the front tire and then the plastic inner fender liner. Once removed, you'll have easy (more or less) access to the rear of the headlamp housing.

Apr 27, 2010 | 2007 Saturn Aura XR Sedan

1 Answer

Changing the passenger side headlamp on altma


  1. Open the hood. Locate the two 10 mm coolant reservoir retaining bolts on the passenger side of the vehicle and then remove them using the ratchet and socket.
  2. Remove the 10 mm bracket retaining bolt using the ratchet and socket. Remove the bracket.
  3. Position the coolant reservoir out of the way to gain access to backside of the headlight assembly.
  4. Turn the large plastic headlight cover counterclockwise to remove it from the back of the headlight assembly. Remove the cover.
  5. Disconnect the wire harness clips from the headlight blades by pulling them off.
  6. Press in and then upward on the headlight retaining ring holding the headlight bulb in place. Remove the bulb.
  7. Align the new composite headlight into place without touching the glass bulb. Skin oils will greatly reduce and compromise the longevity of a halogen composite headlight.
  8. Refasten the retaining ring to secure the headlight into the headlight assembly. Plug the wire harness onto the blade of the headlight and test for function. Reassemble the remaining components by reversing the procedure.
Hope this helps. :)

Feb 13, 2010 | 2001 Nissan Altima

2 Answers

How do I replace the headlight on my VW City Golf 2008


you should have an h7 bulb, once to take the rubber grommet behind the headlight, you will see the h7 socket, which has to wires in it, gently pull thi socket off, then there is a small wire holding the bulb in place, gently unhook the wire from the one side. and turn it to the other side and the bulb shoudl come out... replace the bulb putting it in the same way the other bulb came out.. notice the h7 bulb has a small notch on one side. it has to go in the same way or the wire will not hook back on. once it has been placed, turn the wire over the base of the bulb and hook it again, then put the socket back on the bulb and put the grommet back on the headlight.

Jan 10, 2010 | 2007 Volkswagen Golf

2 Answers

How do you change front headlight blub 2008 sonata


how do you change front headlight blub 2008 sonata

Nov 28, 2009 | 2008 Hyundai Sonata

1 Answer

How 2 change head light bulb on a 2000 z24


To change the bulbs in the headlights,(on a 2002 Z24) you need to remove the plastic splash cover the extends the width of the car over the headlights by removing the plastics pins that hold it in . Pull up on the center of the pins to remove them. Once the cover is off, remove the two bolts that hold the headlight in, then place a screwdriver into the slot for the parking light lens to pop the clip loose that holds the lens in place. The headlight assembly can then be removed, once the wire harness is unplugged from the bulb. There is a round retainer that locks the bulb into place. Rotate the retainer counter clockwise and remove the bulb. Don't touch the bulb surface as oil from a person's hands can cause premature failure. Just reverse these dirctions to reinstall the rest of the parts. This may sound difficult, but it really isn't. I hope this helps out some fellow z owners.

Feb 17, 2009 | 2000 Chevrolet Cavalier

1 Answer

How to replace headllight lamp


I know your frustration! I cannot believe the complexity of changing the headlights. Chevy has tried to make this a dealer item only just to change a headlight bulb. I will try to explain the procedure unfortunately I do not have photos. First you will need to remove the wheel well liner (two bolts and two plastic push pins). Pull the wheel well housing back (you will need to turn the wheel/tire to gain access) and using a 7mm socket remove the plastic support piece that holds the bumper in place (two bolts). Pull the corner of the bumper down until you can locate the bottom bracket of the headlight assembly that is held by a 10mm bolt. Remove it. (Oh did I mention this is a two person job!) Next move to the front of the vehicle (hood up) and remove all the 10mm bolts holding the upper part of the grill (I think there are eight of them). Now remove the obvious top two bolts on the headlight assembly! With two people - one to work the headlight assembly and one to push down the bumper and pull out on the grill assemble, slowly and carefully pull the headlight assembly straight forward. You will need to be mindfully of the small tabs on the headlight assembly that like to get caught on bumper/grill. If you are just replacing the bulb, you should be able to move the headlight assemble far enough forward to gain access to the bulbs without totally removing the headlight assembly. What a ***** job! SHAME on GM.

Oct 11, 2008 | 2008 Chevrolet Suburban

2 Answers

Replacing the headlight bulbs on 2005 Ranger


Having just purchased a 2002 Ford Focus I found that the passenger side headlight had gone. Stumbled accross this thread and thought "looks like a pain".
Popped to Halfords and picked up a H1 bulb, went home and had a look under the bonnet.
Armed with just a screwdriver I managed to change the bulb within 10 mins. Flicked the headlight cover off using the screwdriver for a bit of leverage. Unpluged the headlight and flicked off the retaining clip. Removed the bulb.
Fitting was even easier - Put bulb in place, clip the retaining clip in place, plug in and replace cover.
Job done within 10 minutes with no prior experience of Fords.
Hope it helps
IMPORTANT!!! The retaining clip does NOT just flick off. Tried that and broke the plastic stop that holds the retainer clip and allows it to apply tension to the bulb! The retainer wire is held in place on the bottom by a screw and clip on the bottom and is locked into a plastic clip on top. To remove the wire, push the wire down and towards the passenger side of the car, it will dislodge and you can then lower it to remove the bulb. Once the bulb has been changed, you want to replace the wire the same way to protect the plastic clip. I don't know what I will do about the plastic clip now, the retaining wire has no tension and I'm afraid the bulb will not remain seated properly. However, knowing what I know now, I agree with the above answer: Done in 10 minutes without prior experience with Fords.
=== Just finished doing this. A small mirror and a flashlight make this job simple. It's very easy to do once you can see the top of the clip.
small mirror and flashlight are essential, look at the way the retaining wire seats before you unclip it. flat side of the bulb houseing sits at the bottom of the access hole. retaining wire clips bottom to top. I had a hard time with seating the new bulb and had to figure out the retaining wire clipped from bottom to top because I didn't look at it before I unclipped it. obviously fords designed this for ease of manufacter with very little regard to the average layman who would do the replacing.

Jun 24, 2008 | 2005 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...