Question about 1999 Ford Expedition

Open Question

Where is the orifice tube located on a 1999 expedition

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 93 Answers

SOURCE: Where, exactly, is the orifice tube located on my truck?

the orfice tube is locate in the line between condenser and evaporator. near the spring lock coupling. you must unbolt the cruise servo and overflow bottle, reposition them out of way and you will see the line connection..the orfice is inside line near that uniion. the ac system must be evacuated prior to removal, and recharged afterwards..

Posted on Jun 04, 2009

Ad
harley9701ha
  • 424 Answers

SOURCE: 2002 Ford Expedition Eddie Bauer 5.4l Dual A/C

There is one orifice tube for the font air. It is located in the a/c line coming from the condenser to the evap. core. the rear a/c has and expansion valve attached to the rear evap. core. Hope this helps.

Posted on Oct 08, 2009

  • 23 Answers

SOURCE: location of orifice tube in 2004 ford taurus

orfice should be located on the accumulator, where the large line connects.

Posted on Oct 03, 2008

  • 299 Answers

SOURCE: I just changed my air condition system

on pass side underhood you will see reciever/drier(large line goes to it,Then you will see small ac line by it,disconnect small line, orfice tube is inside it.

Posted on Jun 19, 2009

emissionwiz
  • 77186 Answers

SOURCE: orifice tube location on a 1995 gmc jimmy

it is located in the high pressure AC line at the AC evaporator core inlet. The high pressure line is the smaller of the two AC lines that come from the AC compressor on the engine..

Posted on Mar 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the orifice tube on an expedition 2001 with dual ac


On most any Ford vehicle, the orifice tube is hidden directly in the pressure line just before it goes into the evaporator core (the little radiator looking device hidden underneath your dash). There should be a quick disconnect where the lines go together by the accumulator. The orifice tube will be wedged in the aluminum line. If you look closely, you will actually be able to see an indentation in the aluminum line that prevents the orifice tube from slipping too far into the aluminum line. The orifice tube on a Ford almost ALWAYS requires the use of an orifice tube removal tool. Hope this helps.

May 19, 2014 | Cars & Trucks

1 Answer

WERE IS ORIFICE TUBE FOR 1999 TAHOE


WHERE IS ORIFICE TUBE ON 1999 CHEVY TAHOE 5.7 LITER ENGINE.

Apr 07, 2012 | Chevrolet Tahoe Cars & Trucks

1 Answer

Where is the orifice tube located?


The orifice tube replaces the typical expansion valve in your A/C system. It is located in the condenser outlet pipe, which is the high pressure side of the system.
I hope this helps,

Jul 02, 2011 | 1999 Mercury Grand Marquis

1 Answer

Where is the orifice tube on a 2002 ford expedition?


For a 2002 ford expedition the ac orfice tube is located in the evaporator core, remove the lower line to core and look inside , using a needle nose pliers pull tube out. heres a picture of the orfice tube, take note of which way the tube comes out and make sure the new one goes in in the same direction, good day.johnjohn2_91.jpg

Apr 03, 2011 | 2002 Ford Expedition

1 Answer

A/c low pressure quick disconnect location? 1999 ford expedition


on the tube between the firewall and the a/c compressor. On some Fords the low pressure port is on the dryer2_bing.gif (aluminium cylinder). Good news is the low pressure and high pressure port are different sizes. You cannot mess it up.

Remember the flow for the a/c system is :
1. From the compressor a high pressure (HP) gas goes to the condenser in front of the radiator.
2. From the condenser a HP2_bing.gif liquid goes to an expansion device (orifice tube or expansion valve)
3. From expansion device the low pressure gas enters the firewall to the evaporator.
4. From evaporator the low pressure liquid/gas mixture goes through the dryer back to the compressor suction

May 29, 2010 | 1999 Ford Expedition

1 Answer

Where is the orifice tube located at on the truck?


You will cee a thin A?C tube running towards the evaporator core housing. The tube will look like it is connected to another tube. Ijnside there is the orifice tube

May 24, 2010 | 1999 Chevrolet S-10 Pickup

1 Answer

2002 Ford Expedition Eddie Bauer 5.4l Dual A/C Are there 2 orifice tubes in the split unit? Where are they located? Is there a diagram available showing the tubes in the system?


There is one orifice tube for the font air. It is located in the a/c line coming from the condenser to the evap. core. the rear a/c has and expansion valve attached to the rear evap. core. Hope this helps.

Oct 07, 2009 | 2002 Ford Expedition

2 Answers

1999 expedition A/C Low pressure


There are always TWO connection points to an AC system. The large tubing is the input. The smaller tubing is the output. You MUST hook up the freon can to the large tubing input. You still have to run the AC on high, and wait about 20 minutes, with the freon can in a bowl of warm water to stop it from icing up. It will get very cold.
Watch the sight glass on the reciever/dryer canister, is there is one. When the bubbles are gone, it is time to stop.

Sep 12, 2009 | 1999 Ford Expedition

1 Answer

Expansion valve location


raven 1g: Your car doesn't use an expansion valve. It uses a fixed orifice tube which is located in the smaller of the two A/C lines, just before they enter the cabin area of the car.
Just disconnect the line and pull the orifice tube out of the line. Be careful not to break off anything and leave it in the line.

May 10, 2009 | 1999 Mazda 626

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

1,184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...