Question about Isuzu Rodeo

2 Answers

I want to set valve clearances on 1997 2.6 petrol holden rodeo. i need valve sequence? how can i tell which is exhast and which is intake?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

The valve clearance is intake .006 exhust .010 they must be set with engine cold passenger side is the intake driver side is the exhust send me your e-mail and i will send you the procedure.

Posted on Apr 08, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

Knowing Intake from Exhaust is pretty basic...The intake valves are on the intake side of the head and the Exhaust valves are on the Exhaust side. If you don't know the difference between an exhaust valve and an intake valve, how are you going to know if your cams are lined up properly so you can check the clearance on each valve? How are you going to know if the cylinder you are checking is on Top Dead Center?

Posted on Apr 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head bolt torque settings and order for 24litre petrol engine Austalia Holden rodeo Isuzu motor c24se Holden Rodeo 2003


this is USA forum
not a single HOLDEN here
not a one.
why ask us,
why not join , real forum that covers your country

http://www.planetisuzoo.com/

Mar 12, 2017 | Isuzu Cars & Trucks

1 Answer

Have an 06 Ra Holden rodeo v6 3.5 petrol. A very loud knocking noise has started, it has lost a bit of power. The noise seems to be louder when I rev the car. What could be the problem?


knocking usually called rod knock --possible spun a bearing on crank -other wrist pin damaged --piston rings damaged --other possible valve drop or bent ---need to do a compression check --to see which cylinder is causing problem

Jul 06, 2016 | Holden Cars & Trucks

1 Answer

I have a 93 Holden rodeo 2.6 was playing up to dirty fuel done the fuel filters won't start now checked plugs rotary button distributor coil fuses they where fine ,still won't start ideas please


Holden rodeo fuel system saga ( The problem was a dirty ...

? 43:05
https://www.youtube.com/watch?v=vlh4ey4vFAk
May 31, 2014 - Uploaded by 1966human
Th actual problem was a dirty MAF ( mass air flow sensor - i fixed it myself ) I was charged for a new fuel pump and i absolutely cant find any ... Install new injectors+clean intake Isuzu 2.6 (Problem was dirty MAF) ... 1995 2.6 holden rodeo / isuzu pickup fuel pressure test ( problem ... About the HTML5player.

98 holden rodeo TFS 2.6L petrol w/shop manual - • Club Isuzu ...

www.clubisuzu.com > The Club House > General Isuzu and 4x4 discussion

Jan 30, 2011 - 20 posts - ‎2 authors
I am in Aust, and the Holden rodeo manual if I can get it is about $495 .00 so I am looking at ... My problem is to do with fuel starvation in the 2-3000 rev range, and it isrunning as if it is missing, but it is not. ... I have been playing with the throttle Position Sensor (TPS) and could do with some guidance there.

Dec 10, 2015 | Holden Cars & Trucks

2 Answers

Valve clearance 4hj1 isuzu


Intake valves clearance cold 0.4mm(.016inches)
Exhaust valve clearance cold 0.4mm(.016inches)

Oct 28, 2015 | 2001 Isuzu Rodeo

1 Answer

What is the valve clearance on a 2007 Holden Rodeo 2.4L Petrol?


They don't have adjustable value they are hydrolic

Sep 18, 2014 | Holden Ute Cars & Trucks

1 Answer

Valve clearance adjustment


Hi I am looking for the valve clearens of a Toyota Quantum 8 valve Petrol 2RZ

Thank You

Jan 01, 2014 | Ford Cars & Trucks

1 Answer

Rodeo petrol starts but wont rev


Holden Rodeo 1989 2.6mpi , start and only runs for 2 or so seconds themselves stalls, after putting on a fuel peesure gauge, fuel looked okay and slowly dropping, found the ECM relay was intermittently switching on and off, gave it a tap and the engine kept on running, relay not repairable, replace with new part. Located in the fuse and relay box on the right hand side of engine bay next to battery. Hope this helps.

May 24, 2012 | Holden Rodeo Cars & Trucks

2 Answers

Head bolt torque settings...


Stage 1 = 29Nm(21 lb ft/3.0 kg-m)
final = 64Nm(47 lb ft/6.5kg-m)

Buy new bolts first tho

Jun 28, 2009 | 2001 Isuzu Rodeo

1 Answer

Holden 94 rodeo petrol


Good Day
Vale clearance cold
intake .006 in (.15 mm)
exhaust .010 in (.25 mm)

Timing
1. With transmission in Neutral or park, start engine and warm to normal operating temp. turn eng,and all accessories off. connect Tachometer. Connect timing light to no 1 spark plug wire.

2. Disconnect and plug fuel vapor canister purge hose and EGR vacuum hose. Start and ensure idle is 900 RPM. adjust idle as required. Check ignition timing ( 12 @ 900)

3. If adjustment is required, loosen distributor hold down bolt and turn until timing is within specification. Tighten distributor hold down bolt and recheck timing. adjust idle speed as required.

hope this helps

Cheers

Aug 18, 2008 | 1994 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

645 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...