Question about 2004 Toyota Land Cruiser

1 Answer

2004 landcrusier 100 series. glow plug light stays on all the time, although the glow plugs are not being supplied power. starts and runs ok.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,403 Answers

THIS COMES ALL FROM "WAIT TO START" DO YOU WAIT TO START? IF NOT,THEN THE GLOW PLUGS ARE BUR'NT OUT,WHICH YOU WILL NOT NEED UNTIL FALL. OR MAYBE YOU'VE GOT IT HOOKED ON EITHER,STARTING FLUID,IN WHICH CASE,I SUGGEST YOU REPLACE THOSE GLOW PLUGS NOW.OR ELSE YOU'RE MOVING ON TO EVEN WORSE ISSUES.LET ME ASK YOU THIS,WHY ARE'NT THE GLOW PLUGS BEING DENIED POWER? AFTER ALL THEY START THE ENGINE? AFTER YOU INSERT THE KEY INTO THE SWITCH,WAIT TO START,LIGHTS UP.IF YOU'VE NOT WAITED UNTIL THAT WAIT TO START LIGHT GOES OFF,,,YOU'VE BURNT THE GLOW PLUGS UP.THE ONLY THING TO DO IS REPLACE THEM ALL.IF YOU'VE BEEN USING STARTING FLUID OR EITHER TO START YOUR ENGINE FOR A LONG PERIOD OF TIME,FORGET REPLACING THE GLOW PLUGS,BECAUSE YOUR ENGINE IS ADDICTED TO THE BOTTLE(EITHER) YOU MAY BE ONE OF THE LUCKY ONES,REPLACING THE GLOW PLUGS MAY RESOLVE YOUR ISSUES.BUT,WAIT TO START,,AIN'T NO JOKE. BEST OF LUCK TO YOU & YOURS!

Posted on Apr 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 isuzu 3liter diesel starts cold drive 3 miles stop try to restart engine management light comes on and engine turn over for ages before starting. runs with light displayed


no car stated? some huge NPR truck, What?
no country
why>?
we cant guess lights,ever, we in USA forum are 100% blind.
guess you lost the operators guide book,, oops, fail.

glow plugs bad. (by all means)
filters packed.
start ok with starting fluid spray easy???????

Feb 18, 2017 | Isuzu Cars & Trucks

1 Answer

Why does my 2004 (Land cruiser) PRADO 3000 Turbo Diesel 5sp- have issues starting when it's cold? It turns over and over does nothing, then when it starts, I get a big plume of smoke, then it idles rough...


glow plugs are activated if look on the dash when you turn the ignition just before cranking and you should see a light that stays on for several seconds then goes out and then you should crank the engine ! sometimes when its really cold or the glow plugs are worn try turning the ignition on and off each time light goes out 2 or 3 times to get more heat on the plugs then start ! if this doesnt work then glow plus and system needs checking !

Sep 02, 2014 | Cars & Trucks

1 Answer

Glow plugs not working hj75 landcrusier after changed alternator to internal.


recheck the connections some connection loose, bad contacts, use the VOM for some wires open or break. with alternator/ignition see the diagram attached. If the problem persist RUN the scanner/computer for easy diagnostic and fix it.
God bless you1296522e-9e5b-4a24-a456-0e10ac38d8f2.jpg

Jul 12, 2013 | Cars & Trucks

1 Answer

6.0 2004 F-250 was starting hard when cold, replaced glow plugs &harness still starts hard runs rough, glow plug light stays on longer now though


time for replacement of or severe cleaning with fuelinjection cleaner..also if diesel, add cold start to the fuel system..check and replace oil filter type fuel filter since jelling of fuel may be a cold start issue..crack open an injector line and see if injector pump is pushing fuel really well..and see if air cleaner needs replaced blackened element is not good..good luck..

Jan 19, 2013 | 2004 Ford F250

1 Answer

100 series landcruiser glow plug light stays on


I have a 2005 1hz landcruiser, the "glow Plug Light" comes on when I release the accelerator pedal and then goes "off" when I accelerate - any ideas - thanks

Feb 22, 2011 | 2004 Toyota Land Cruiser

1 Answer

Could a faulty coolant temp sensor make the glow plugs run all the time on a 1983 Mercedes 300CD?


No the glow plugs circuit is separate. They actually are on a timed delay shut off. Check the glow plug relay module behind the driver side headlamp assembly. If the light on the cluster is staying on all the time it's simply letting you know there is a fault in the glow plug circuit. Doesn't actually mean that the glow plugs are staying on all the time. You might just have a bad glow plug which is breaking the circuit therefor the glow plug light stays on. To check this use a test light and have someone turn on and off the ignition to see which plug doesn't light up.

Oct 11, 2010 | 1983 Mercedes-Benz 300-Class

1 Answer

Tried to start 2004 f250 with out glowplugs now it wont start. checked fuse still wont start


glow plug light and glow plug are not on same system
check at gow plug conection (top of valve cover both side
follow from relay front valve vover right side silver box)
power 12 volts on all 4 wires in both conector left and right
if not replace relay if 12 volts relay ok (test light clip on ground)
then check glow plug (test light clip on positive ) touch wires going
to glow plug should light up if ok (quick test ) if any fail replaced
if all seems ok look at the oil injection system most common
problem with these motors I have yet to replaced a glow plug or relay

Sep 30, 2010 | 2004 Ford F350

2 Answers

6.0 diesel will turn over but wont start


is glow plug light on when u turn key to on and go off verry fast see how long stay onplz replay

Nov 02, 2009 | 2004 Ford F350

1 Answer

88 f250 diesel ticks hard pumps smoke still starts good and no power loss, took vavle cover off and everything looks ok wat should i check next wat would i look for if i was to pull injectors


The problem is the glow plugs are bad or not coming on. Even though the "wait to start" light comes on, the glow plugs may not come on. I have found when this happens, the light comes on for only 1-2 seconds and goes off. With the engine cold, the light should stay on for about 5 to 7 seconds. The colder the engine, the longer the plugs should stay on. There is one glow plug for each cyl. The plugs are in the "V" of the engine and screwed into head. Only one wire goes to the glow plug and the wire runs from one plug to the next on each bank. You test them by removing them and grounding the body and putting 12v positive to the terminal. The tip should glow red hot like a cigarette lighter. There is a glow plug relay behind the air intake horn which also could be the problem and there is a engine temp sensor in the circuit also.

Oct 14, 2009 | 1988 Ford F 250

1 Answer

Glow plugs causing starting problem


if you need connectors and terminals for the glow plug connections under the valve cover, Ford sells then so you don't need a whole $600 harness.

info for your use

Section 03-07B: Glow Plug System 1996 F-250, F-350, F-Super Duty Equipped with 7.3L Diesel Engines Workshop Manual
DESCRIPTION AND OPERATION Glow Plug System The 7.3L diesel engine uses a glow plug system which preheats air in the combustion chamber to improve cold engine starting. The system consists of eight glow plugs, the glow plug control module (12B533), powertrain control module (PCM) (12A650), engine oil temperature (EOT) sensor and barometric pressure sensor (BARO sensor) (12A644). The glow plug system is electronically controlled by the powertrain control module. The powertrain control module energizes the glow plugs immediately after the key is placed in the ON position and then determines how long the glow plugs will be on according to the engine oil temperature and the barometric pressure. The required time for the glow plugs to be energized decreases as the engine oil temperature and barometric pressure increase. The glow plugs are self-regulating, and the powertrain control module controls relay ON time. The powertrain control module protects the glow plugs by energizing them for short durations if the battery voltage is abnormally high.

Possible Causes: Insufficient glow plug ON time will not allow enough heat to accumulate in the combustion chamber to easily facilitate starting. If the glow plug system ON time does not meet any of the specifications in the accompanying chart the problem is most likely a faulty wire harness connection, ground connections or glow plug relay.

If the glow plug resistance to ground is high, the most likely causes are an open UVC (under valve cover) harness or open glow plug.
--------------------------------------------------------
Relay Operation
Install a DVOM on the glow plug feed side of the glow plug relay (large stud with two wires connected). Turn the ignition key to the ON position but do not attempt to start. Note the time in seconds from when the key is turned on and the glow plug relay energizes until the glow plug relay de-energizes. The glow plug relay makes a loud click noise which is easily heard when it energizes and de-energizes. The dome light will dim and the dash voltmeter will dip when the glow plugs are drawing current from the battery. Compare the times measured to the table (time will be affected by engine temperature, battery condition and vehicle altitude). The voltage at the glow plug feed terminal may vary from 9 to 12 volts depending upon battery condition.
--------------------------------------

-----
If battery voltage not present check for B+ at power supply terminal (terminal with single large wire). Power for glow plug power supply is supplied from starter relay through two fusible links at solenoid.
Glow Plug Operation
Disconnect all of the glow plug/injector harness connectors from the valve cover gaskets. With the pigtail installed, measure glow plug resistance to ground (preferably B-). A resistance measurement of .1 to 6 ohms indicates a good glow plug.



Glow Plug Harness Continuity
Measure for continuity from the connector harness to the glow plug feed terminal on the glow plug relay. Resistance should be less than 5 ohms.
Incorrect measurements will result if all glow plug/injector connectors to valve cover are not disconnected.

---------------------------------------------------
Glow Plug Relay The glow plug relay (12A343) has a plastic base and two mounting bolts. It is operated by the powertrain control module (PCM) (12A650) which senses engine oil temperature, PCM voltage and barometric pressure. When the engine oil temperature or the barometric pressure is low, the PCM activates the glow plug relay and the glow plugs. If the PCM voltage is too high, the powertrain control module deactivates the glow plug relay and the glow plugs immediately energize for a shorter duration, decreasing the modulation of the duty cycle.
-----------------------------------------------
Glow Plug Removal
  1. stj~us~en~file=ani_caut.gif~gen~ref.gif WARNING: THE RED-STRIPED WIRING HARNESS CARRIES 115V DC. SEVERE ELECTRICAL SHOCK MAY BE RECEIVED. DO NOT PIERCE.
    Remove valve cover (6582). Refer to Section 03-01D .
  1. Disconnect glow plug electrical connector using a pair of pliers.
  1. Remove glow plug using 10mm socket.
  1. Clean and inspect glow plug tip for damage. Replace if damaged.
Installation
  1. Install glow plug and tighten to 19 Nm (14 lb-ft).
  1. Connect glow plug electrical connector. Make sure glow plug wiring is routed to avoid moving parts.
--------------------------------------------------------------
Glow Plug Control Glow plugs are used to warm the cylinders to improve cold-engine starting. The PCM uses the engine oil temperature (EOT) sensor and barometric pressure (BARO) sensor to determine how long the glow plugs will be on. The PCM energizes the glow plugs longer if the engine is very cold or if the barometric pressure is low at high altitudes.
The PCM controls the relay that supplies power to the glow plugs with the glow plug control (GPC) signal. When the GPC signal is grounded by the PCM the relay closes, turning the glow plugs on.
The glow plugs are controlled by the following sequence:
  1. PCM energizes the glow plugs.
  1. The PCM energizes the glow plugs immediately after the ignition is placed in the ON position.
  1. The PCM then determines how long glow plugs will be on based on EOT sensor and the BARO sensor. The required time to warm up the cylinder decreases the engine oil temperature and barometric pressure increases at low altitudes.
Glow Plug Lamp Control The glow plug lamp (GPL) signal controls the WAIT TO START light located on the instrument panel. This light is used to indicate when to start the engine. The cylinders are being warmed by the glow plugs during and after this light is lit. The PCM energizes the glow plug lamp longer if the engine is very cold or if the barometric pressure is low.
When the GPL signal is brought low, the "Wait to Start" lamp is turned on.
The glow plug lamp is controlled by the following sequence:
  1. PCM lights the WAIT TO START light after a key on reset occurs.
The PCM determines the glow plug lamp activation time based on engine oil temperature, barometric pressure and battery voltage.
  1. PCM turns off the WAIT TO START light.
The glow plug lamp is turned off when the timer counts to the number of seconds specified by the PCM. The glow plugs will normally remain on longer than the "Wait to Start" lamp.
-----------------------------------

Mar 14, 2009 | 2004 Ford F350

Not finding what you are looking for?
2004 Toyota Land Cruiser Logo

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...