Question about 2001 GMC Jimmy

1 Answer

2001 GMC Jimmy 4WD. It wants to kick out of 2wd Hi and sounds like the gears are grinding. I have to put it into four hi to get it to pop in and then stop and put it back into two. Changed the actuator and it is still doing the same thing. Any suggestions on what to change nest?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

These somtimes have problems with wirering at connection for 4wd modual. It should be located in pass. side kick panel. Wiggle wires and connector and see if problem occures. Problem sometimes located in connector.

Posted on Apr 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get a push button four wheel 96 jimmy out of four wheel drive


take the switches 2wd 4wd hi 4wd lo out of the dash and unplug them all then use small wire to jump the 2wd connectors then replace new 4wd button and new 2wd button

Mar 16, 2011 | GMC Jimmy Cars & Trucks

1 Answer

2000 GMC Jimmy slow stop on dry pavement ABS kicks in


It Sounds Like Your ABS Channels, Its A Separate Hydraulic Circuit That Feeds Out To One Or More Wheel Cylinders Or Caliper Pistons.Anti-Lock Brake Systems Can Have From One To Four Channels.

Apr 09, 2010 | 2001 GMC Jimmy

2 Answers

I have a 1998 GMC jimmy the motor on the transfer case for putting it in to 4x4 needs to be replaced is there anything I need to know to replace it


yes
the gears inside the motor strip out because the
clutch pack inside the transfer case are hanging up
do to wear
so be carefull
you may damage the gears in the new motor
the way you can tell is to take apart the old transfer case motor and look and see if the 4 small gears are
chewed up

Jan 10, 2010 | 1998 GMC Jimmy

1 Answer

My 2000 gmc jimmy is stuck in either auto 4wd or 4wd hi, it won't go back into 2wd hi, the service 4wd light is lit on the dash, would you have any idea what the problem might be and how much it would cost...


Use the Owner's Manual to manually go into neutral and reset to 2WD HI. But then look under the hood check the fuses or look for wiring that may have come unplugged.

Oct 15, 2009 | 2000 GMC Jimmy

1 Answer

I own a 1995 GMC Jimmy and I dont know if my 4wd works or not the light does not turn on when i push the button i do i know if it works or not? does it need to be in park or neutral to ingage?


You can shift into and out of 4wd hi in any gear even when vehicle is moving. You must stop and put in neutral to shift into or out of 4wd low.
To see if it is working, go to a dirt field or on the beach if one is available. Put truck in four wheel drive, turn steering wheel all the way one way or the other and stick you head out the driver window and look at the front tire and "PUNCH IT". If the four wheel drive is working you will see the front tire spin. Hope this helps.

Jun 21, 2009 | 1999 GMC Jimmy

3 Answers

2001 jimmy stuck in 4wd low


Usually when a truck gets stuck in 4 low you need to put it in reverse, start backing up very slowly, put it in neutral (or push in the clutch on manual trans models) and stop the truck with the brakes. this will release the load on the gearing which should allow you to shift out of 4 low.

Feb 15, 2009 | 2000 GMC Jimmy

1 Answer

Unable to put my 2001 GMC Jimmy in 4wd


fuse! I bet it is the fuse.does it flash and try to switch?

Dec 17, 2008 | 2001 GMC Jimmy

1 Answer

Intermittent 4wd on 98 jimmy


the module is what i would suspect. and i do believe it is in the r kick panel. i've seen the button pack on dash go bad too, but module is best bet.

Nov 14, 2008 | 1998 GMC Jimmy

1 Answer

Transmission - no reverse


i had to put a new trans in my 2000 jimmy about a year ago there is something inside called a "reverse hub" its made from aluminum and not very hard to break..when mine broke i was stuck trying to move in reverse and it heard a pop then a winding down noise and sure enough its the reverse hub to fix it i just had the trans rebuilt

Sep 08, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
2001 GMC Jimmy Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...