Question about Cadillac DeVille

1 Answer

Where is the connector - DeVille Cadillac Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,654 Answers

What connector are you talking about, there are about 100 connectors on these cars.

Posted on Apr 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the location of 06 Saturn Ion 2 compressor relay?


Connector 1:
Fuse Block - Underhood Label (2.2L, 2.4L)
Connector 2:
Fuse Block - Underhood Top View (2.2L, 2.4L)
Connector 3:
Fuse Block - Underhood Bottom View (2.2L, 2.4L)
Connector 4:
Fuse Block - Underhood C1 (2.2L, 2.4L)
Connector 5:
Fuse Block - Underhood C2 (2.2L, 2.4L)
Connector 6:
Fuse Block - Underhood C3 (2.2L, 2.4L)
Connector 7:
Fuse Block - Underhood Label (2.0L)
Connector 8:
Fuse Block - Underhood Top View (2.0L)
Connector 9:
Fuse Block - Underhood Bottom View (2.0L)
Connector 10:
Fuse Block - Underhood C1 (2.0L)
Connector 11:
Fuse Block - Underhood C2 (2.0L)
Connector 12:
Fuse Block - Underhood C3 (2.0L)
Connector 13:
Body Control Module (BCM) Label
Connector 14:
Body Control Module (BCM) Top View
Connector 15:
Body Control Module (BCM) Bottom View
Connector 16:
Body Control Module (BCM) C1
Connector 17:
Body Control Module (BCM) C2
Connector 18:
Body Control Module (BCM) C3
Connector 19:
Body Control Module (BCM) C4
Connector 20:
Body Control Module (BCM) C5 (UE1)
Fuse Block - Underhood Label (2.2L, 2.4L)
2.2L

alt="Object Number: 1438995 Size: MF">

alt="Click here for detailed picture of above image.">

2.4L

alt="Object Number: 1583009 Size: MF">

alt="Click here for detailed picture of above image.">

Fuse Block - Underhood Label Usage (2.2L, 2.4L)
No.

Device

Rating

Description
1

ECM (2.4L)/TCM Fuse
10A

ECM (2.4L)/TCM
2-3

--
--

Not Used
4

RH HDLP Fuse
15A

Headlamp - Right
5

A/C Fuse
10A

A/C CLUTCH Relay
6-7

--
--

Not Used
8

ABS Fuse
10A

EBCM (JM4)
9

ECM/ETC Fuse
15A

ECM
10

EMISS Fuse
15A

EVAP Canister Purge Solenoid, Coolant Level Switch, MAF Sensor, HO2S 1, and HO2S 2
11
IGN Fuse
10A
ICM and PNP Switch (A/T)
12
--
--
Not Used
13
TRANS2 Fuse
10A
ECM, Automatic Transmission
14
TRANS1 Fuse
10A
TCM (MN5)
15
BACK UP Fuse
10A
PNP Switch (A/T) or Backup Lamp Switch (M/T)
16
INJECTORS Fuse
10A
Fuel Injectors 1-4
17
FOG LP Fuse
10A
FOG LAMP Relay (T37)
FOG LP Fuse
15A
FOG LAMP Relay (T96)
18
LH HDLP Fuse
15A
Headlamp - Left
19
WIPER Fuse
25A
WIPER 1 Relay
20
HORN Fuse
10A
HORN Relay
21
RADIO Fuse
20A
Audio Amplifier (UZ6)
22
ABS Fuse
20A
EBCM (JM4)
23
RR DEFOG Fuse
30A
REAR DEFOG Relay
24
A/C CLUTCH Relay
--
A/C Compressor Clutch

Jul 17, 2015 | 2006 Saturn ION 2

1 Answer

How to remove multifuntion connectors from bulk head connector


If the connector fits inside the unit, on one side of the connector there is a tiny lever that has to be pushed toward the center of the connector, simultaneously pulling the connector out. If the connector is outboard of the unit (at least the depth of the connector itself) there is a lever on one side of the connector that has to be pulled outward slightly while pulling the connector. Being a '96 (been connected for many years), it could take some serious force to pull the connector away

Jun 26, 2014 | 1996 GMC Sierra

1 Answer

Trouble shoot


I believe that's a Speed Sensor issue.

Diag:
1. Ensure mainshaft and countershaft speed sensors are installed properly. Disconnect mainshaft speed sensor harness connector. Using a DVOM, measure resistance between sensor terminals.

2. If resistance is not 400-600 ohms, replace mainshaft speed sensor. If resistance is 400-600 ohms, disconnect 25-pin PCM harness connector "B". Check for continuity between ground and 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

3. If continuity is present, repair short to ground in Red or White wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

4. If resistance is not 400-600 ohms, go to next step. If resistance is 400-600 ohms, go to DTC
P0720 (FLASH CODE 9) . Check for loose PCM harness connectors. Replace PCM with a
known-good unit if necessary.

5. Disconnect mainshaft speed sensor harness connector. Check Red wire for continuity between 25-pin PCM harness connector "B", terminal No. 15 and mainshaft speed sensor harness connector. If continuity is present, go to next step. If continuity is not present, repair open in Red wire between 25-pin PCM harness connector and mainshaft speed sensor
harness connector.

6. Check White wire for continuity between 25-pin PCM harness connector "B", terminal No. 14 and mainshaft speed sensor harness connector. If continuity is present, check for loose PCM harness connectors. Replace PCM with a known-good unit if necessary. If continuity is not present, repair open in White wire between 25-pin PCM harness connector and mainshaft speed sensor harness connector.

Mar 21, 2014 | 1998 Acura Integra

1 Answer

Car


Speed Sensor probably. Try:
1. Ensure mainshaft and countershaft speed sensors are installed properly. Disconnect mainshaft speed sensor harness connector. Using a DVOM, measure resistance between sensor terminals.

2. If resistance is not 400-600 ohms, replace mainshaft speed sensor. If resistance is 400-600 ohms, disconnect 25-pin PCM harness connector "B". Check for continuity between ground and 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

3. If continuity is present, repair short to ground in Red or White wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

4. If resistance is not 400-600 ohms, go to next step. If resistance is 400-600 ohms, go to DTC
P0720 (FLASH CODE 9) . Check for loose PCM harness connectors. Replace PCM with a
known-good unit if necessary.

5. Disconnect mainshaft speed sensor harness connector. Check Red wire for continuity between 25-pin PCM harness connector "B", terminal No. 15 and mainshaft speed sensor harness connector. If continuity is present, go to next step. If continuity is not present, repair open in Red wire between 25-pin PCM harness connector and mainshaft speed sensor
harness connector.

6. Check White wire for continuity between 25-pin PCM harness connector "B", terminal No. 14 and mainshaft speed sensor harness connector. If continuity is present, check for loose PCM harness connectors. Replace PCM with a known-good unit if necessary. If continuity is not present, repair open in White wire between 25-pin PCM harness connector and mainshaft speed sensor harness connector.

Mar 21, 2014 | 1998 Acura Integra Type R

1 Answer

Where is the diagnostic port located on a 2000 fiat marea


on a 99 2.0 model you will have 2 diagnostic ports. both of them will be the fiat 3 pin type.

to connect the 3 pin fiat connector to a 16 pin obd2 connector you need 4 lengths of wire. use 3 lengths of wire to connect the 3 pin connector to the obd connector. also use 1 length of wire for power to the obd connector.

on the 16 pin obd2 connector use the following pins
4- chassis ground (connect to ground on 3 pin connector, or any good chassis earth)
5- signal ground (connect to black wire pin on 3 pin connector)
7- k line (connect to white wire pin on 3 pin connector)
16- 12vDC (connect to battery positive terminal)

Apr 08, 2013 | Cars & Trucks

1 Answer

The left front low beam headlight does not come on. have replaced the bulb, but only hi beam works.


Since you've eliminated the headlight itself as the source of the malfunction, the problem is most likely the headlight bulb connector - the female connection inside the connector to the hi beam is good, but the connector supplying power to the low beam is bad. Your fix is to replace the headlight connector.
How: buy a replacement headlight connector at your favorite auto parts store, cut off the old connector, then (a) solder and heat-shrink or (b) wire nut and E-tape, or (c) crimp connector the new headlight connector onto the existing wiring (being careful to route the conductors to the correct wires on the connector).
Your cost: about $3 for a new connector

Feb 14, 2011 | 2003 Pontiac Grand Am

1 Answer

I just need to know what the fuse numbered f16 in the power distibution center does. i need a full description


Fuse 16 (15 Amp) in the Power Distribution center (PDC)
powers circuit M1, (20 gauge, pink) which goes from the PDC
to splice S135.
.
From S135 it goes to pin 25 of the Transmission Control Module,
pin 1 of the Underhood Lamp/Mercury Switch and to pin 12 of
Connector 1 in the Junction Block.

At the junction block, it feeds
Connector 3 pin 3, Connector 4 pin S18, and Connector 7 pin 4.

From Junction Block Connector 7 pin 4 it goes through Connector
C314 and powers the Cargo Lamp.

From Junction Block Connector 4 pin S18 it goes through splice S214 and connector
C208 to power the left courtesy lamp. From S214 it also goes to
Connector C1 pin 9 in the instrument cluster, through connector
C207 to the right courtesy lamp, and to connector C2 pin 7 at
the radio.

From Junction Block connector C3 pin 3 it goes to splice S361, where it then feeds
the right visor/vanity lamp and to splice S347 where it splits off and feeds
the overhead module, the left visor/vanity lamp, compass (If equipped) and
the dome lamp.

Nov 30, 2010 | 1999 Jeep Cherokee

2 Answers

Blower motor resistor connector burned resistor. Went to change resistor and found insulation on two wires melted and connector was burned. Can I replace connector or do I need new wire harness?


You'll have to get the connector from an auto salvage yard. I doubt you'll wants to spend all the money or do all the work involved in changing a wiring harness.
When you get the connector get is with as much wire as possible on it. You can then use **** connectors to splice the salvaged connector in where you cut the old one out. Do it one wire at a time and use sealing or weather proof connectors.

Jun 22, 2010 | 2001 Dodge Dakota

1 Answer

Steering wheel covers


I hope this helps....these are the steps to removing and replacing the cylinder:

  1. Remove the knee bolster.
  2. Remove the steering column trim covers from the steering column.
  3. Disconnect the steering column electrical connectors.
  4. Remove the wire harness assembly from the steering column and the wire harness strap.
  5. Slide the 2 connectors of the turn signal and multifunction switch assembly out of the bulkhead connector.
  6. Remove the key alarm connector from the lock module assembly in the following way:
  7. Rotate the key alarm connector 90 degrees.
  8. Pull the key alarm connector out of the lock module assembly.
  9. Remove the passkey connector from the lock module assembly.
  10. Remove the connector from the electric park lock, for vehicles equipped with floor shifters.
  11. Remove the ignition switch from the lock module using tool J42759 or equivalent.
To install:
  1. Install the ignition switch to the lock module
  2. Install the key alarm connector into the lock module assembly.
  3. Push the key alarm connector into the lock module assembly.
  4. Rotate the key alarm connector 90 degrees so that the key alarm connector locks into place.
  5. Install the passkey connector into the lock module assembly.
  6. Install the connector to the electric park lock, for vehicles equipped with floor shifters.
  7. Slide the 2 connectors of the turn signal and multifunction switch into the bulkhead connector.
  8. Attach the wire harness assembly to the steering column wire harness strap.
  9. Connect the steering column electrical connectors to the vehicle.
  10. Install the trim covers to the column.
  11. Install the knee bolster.
  12. Enable the SIR system.
  13. It may be necessary to reprogram the theft deterrent system if the module was replaced.

Mar 06, 2010 | 2001 Chevrolet Suburban

1 Answer

I want to replace front passenger door


You'll need to support/make stable the door first. remove four (4) 12mm hinge bolts which attach the hinges to the door. Move the door about 4 inches away from the veh to access the door wire harness connector. Disconnect the door wire harness at the connector (connector at the veh body) by sliding the boot off connector & exposing the connector underneath. The connector has a 'release' tab center of the connector. press it and wiggle the connector loose. Install the new door in reverse order.

May 15, 2009 | 2006 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...