Question about 2005 Mitsubishi Galant

2 Answers

Where are the spark plugs on a 2005 galant 2.4

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 14,036 Answers

REMOVE TOP ENGINE COVER,REMOVE CYLNDER HEAD CENTER COVER,YOUR WILL SEE IGNITION COILS SETS ON TOP OF SPARK PLUGS.ALL 4 SPARK PLUGS EACH, WILL HAVE A IGNITION COIL ON TOP OF THEM.REMOVE THE COIL SCREW THEN UNPLUG THE COIL ELECTRICAL CONNECTOR.REMOVE COIL, THEN YOU CAN REMOVE SPARK PLUG.YOU WILL NEED A LONG EXTENSION AND A LONG SPARK PLUG SOCKET TO REMOVE SPARK PLUG.

Posted on Apr 08, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,404 Answers

Find the spark plug wires and follow them to the end - on one end you will find the distributor or the coil depending on the arrangement - on the other end, you will find the spark plug.

Posted on Apr 08, 2011

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 70 Answers

SOURCE: How to change spark plug on a 2001 galant

sparkplugs are under bonnet in the top of the engine you need a plug socket to remove them but dont forget which leads go where or car wont start after

Posted on Apr 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a 2005 mitsubishi galant manual


If it is a 4 cylinder, then you will see spark plug wires that connect to the top of the engine, under each wire there is a spark plug. These wires are fairly thick, they are around 1/4 inch diameter. You need to be careful pulling them off the engine so you don't leave behind the boot. If you haven't replaced plugs before, it is a little tricky, so good luck.

Mar 25, 2015 | 2005 Mitsubishi Galant

1 Answer

2002 mitsubishi galant 1 and 4 spark plugs no spark ....i need help . . i change the coil and plugs already still no spark..


Look more closely at the 1 and 4 coil, also, check for trigger signal to these coils. I mostly suspect the trigger unit.

Dec 04, 2014 | 2002 Mitsubishi Galant

1 Answer

Oil on spark plugs for 2002 Mitsubishi Galant


Sounds like you need to replace the valve cover gasket. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 01, 2012 | 2002 Mitsubishi Galant

1 Answer

Galant won't turn over when trying to start. No spark from plugs. Changed crank sensor and timing belt and still won't start. Any suggestions


you now need to check for 12 volt power, and signal to the coil, also be sure all you timing marks are correct, if you have no spark, unplug one of the injectors and using an led test light check for injector pulse power across the two terninals while cranking, if you have no injector pulse then you could have a problem with the ignition passlock system, or key decoder

Jul 31, 2011 | 2005 Mitsubishi Galant

1 Answer

90,000 engine service what do u change


In a word...everything!

First and foremost replace the timing belt, all of the Galant engines are interference engines meaning that if it fails you will sustain severe damage to the engine. If your at 90K miles your over by about 20K. Since your going to be in there go ahead and replace the water pump.

Also needing replacing, Serpentine belt, Spark plugs, Spark plug wires, anti-freeze, Transaxle fluid, Air filter, Radiator hoses.

If you have a 4 cyl most you can do most of this yourself at very little cost. Don't try the Timing belt unless your an above average do it yourself mechanic.

If its a 6 cyl I'd just have a shop do it all at the same time, the plugs and wires are a pain.

Jan 21, 2011 | 2005 Mitsubishi Galant

1 Answer

How to connect the spark plug wires to the distributor cap on a 1999 mitshubishi galant 3.0 engine


Here you go. As the firing order is 1-2-3-4-5-6 it is simple. Just connect #1 to the #1 location as noted on the diagram, then to the #1 plug, and then as the distributor is rotating clockwise the #2 plug wire goes to the next connection which will be #2 in line and so on. d49a874.png
Diagram curtorsey: about.com

Apr 07, 2010 | 1999 Mitsubishi Galant

1 Answer

How to change spark plug on a 2001 galant


sparkplugs are under bonnet in the top of the engine you need a plug socket to remove them but dont forget which leads go where or car wont start after

Apr 02, 2010 | 2001 Mitsubishi Galant

2 Answers

MITSUBISHI GALANT


may be it is the engine that good condition...

Jul 14, 2008 | 1994 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

870 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...