Question about Toyota Corolla

2 Answers

My rear seatbelt will not retract at all. How can I fix this??

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,803 Answers

If there is nothing stuck in the retractor that you can pull out to fix the problem, the only other choice is to replace the retractor assembly. This part will be available only at the dealer. (Although most shops will install one for you) It is not recommended that salvage parts be used for restraint systems. I have however, used salvage parts on vehicles where the part was obsolete and no longer available from the dealer.

Posted on Apr 08, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

By law seat belts are not repairable

Posted on Apr 08, 2011

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 220 Answers

SOURCE: 1993 Honda Accord Emergency Brake + Rear seatbelt not retracting

The e-brake probably has an adjustment nut either under the brake when you have it pulled up or simply removing a small plastic plate at the back of the console as seen from the rear seat.
You wil probably need about a 12mm deep socked to adjust it. If the nut is bottomed out you will need to adjust if at the wheels.

As far as the seatbelt, you will need to access the reel assembly and determine if the belt is in a bind or the internal spring in the reel is broken. You should be able to tell what the problem is when you get to the reel.

Posted on Apr 25, 2009

  • 73 Answers

SOURCE: far rear wall seatbelts are locked.

Hi,I am guessing you haven't used these belts for a while.Quite often they will wind themselves up with normal car movement and lock.Grab the belt and pull as hard as you can(stretch it).It should come free.

Posted on Jul 25, 2009

  • 144 Answers

SOURCE: 1999 Toyota Camry LE. My left rear seatbelt will

ANYTIME THERE IS A PROBLEM RELATED TO A SEAT BELT THE ASSEMBLY HAS TO BE REPLACED. THERE ARE NO SERVICEABLE COMPONENTS IN THIS ASSEMBLY.

Posted on Sep 10, 2009

thepot
  • 188 Answers

SOURCE: seatbelt is retracted and will not extend.

the safety pre tensioner has gone off, was it ever in a crash? what ever the case it needs a seat belt,

Posted on Nov 18, 2009

  • 67 Answers

SOURCE: 2006 honda civic rear middle

hi it sounds like the safty mechanisum in the belt has been activated some how this happens when a ball bearing falls down into a safty postion and locks the belt up into place you can strip and remove the little ball bearing and have your seat belt working again but no longer will act as it should in a crash so i would strongly advise to change the hole seat belt system .

Posted on Sep 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2016 nissan sentra middle rear seat belt is stuck in the retracted position. I can't use the seatbelt. how do I get it to release?


The likely cause is a broken spring/mechanism in the belt coil. I'm sure you can get a replacement for this belt.

May 22, 2017 | Nissan Cars & Trucks

1 Answer

Seatbelt will not extract on driver side


There should be a mechanism in the door jamb near-to the seatbelt. If equipped, push on it while jerking seatbelt until it retracts. If not equipped, close door firmly while jerking seatbelt to activate retract.

May 09, 2014 | 2004 Mazda 3

1 Answer

I have a 2002 Chevy Tahoe and the 3 point seatbelt on the rear passenger side rear seat has been pulled out all of the way and now it won't retract back into it's holder. Is there an easy wa


The re-tractor is called an Inertia Reel. There on the side, remove the cover and there is a trigger release on most. If the spring is broken, you will need to replace the reel. Check at a local junk yard for the best price.

dc don

Sep 03, 2012 | 2002 Chevrolet Tahoe

1 Answer

How do i fix rear seatbelt that won"t retract


only one soloution and thats to renew it completely

Jun 05, 2011 | 2001 Chevrolet Tahoe

1 Answer

1993 Honda Accord Emergency Brake + Rear seatbelt not retracting


The e-brake probably has an adjustment nut either under the brake when you have it pulled up or simply removing a small plastic plate at the back of the console as seen from the rear seat.
You wil probably need about a 12mm deep socked to adjust it. If the nut is bottomed out you will need to adjust if at the wheels.

As far as the seatbelt, you will need to access the reel assembly and determine if the belt is in a bind or the internal spring in the reel is broken. You should be able to tell what the problem is when you get to the reel.

Apr 22, 2009 | 1993 Honda Accord

1 Answer

I have a 1997 Ford Escort. The rear seat belt is stuck


make sure that the rear seats are properly locked into rear catches as this can stop your seatbels from working if ok then sounds like your seatbelt is faulty req new seatbelt.

Mar 07, 2009 | 1997 Ford Escort

1 Answer

99 maxima rear drivers side seatbelt does not retract.


Inertia reels get stuck permanantly if pulled out suddenly over time or after an accident. You may be able to remove it or pull lightly out with little tension and tap on it, if not you may need to replace the inertia reel.

Jan 06, 2009 | 2000 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...