Question about 1999 Mazda Pickup

Open Question

How do i change the time on my mazda b4000 clock... thank you

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: changing rear brakes on 1998 mazda B4000

make sure your brake adjuster is backed all the way off then gently tap all the way around the back to remove

Posted on Apr 10, 2009

roniecon
  • 6826 Answers

SOURCE: emergency brake sticking.....i think. Mazda B4000 pickup

Are you sure it is the emergency brakes?Or is it a caliper stuck,because it is bad,or the caliper brake hose is stopped up?Jack the wheels up,one at a time,and try to see if they will turn by hand.This will tell you if it is front,or rear.If it is the emergency brake,then the cable from the front,to the bake,is most likely the problem,it is rusted ,and frayed,and stuck,you will have to disconnect it at the rear,from the brakes.If this helps,let us know,If it is the calipers,in the front,the wheels will not turn by hand.Brake loose the caliper bleed screw,and if the caliper turns the wheel loose,then the brake hose is bad,if it does not ,then the caliper is bad on that wheel.

Posted on Dec 05, 2009

BCAS1298
  • 3092 Answers

SOURCE: how long does it take to replace a mazda b4000

To remove and replace heater core 7.1 hrs
Plus 1.4 hrs to recover a/c system, evacuate and recharge a/c system, if your a/c is working.
These labor time's per Mitchell labor guide, a guide book used by repair shop's.

Posted on Jan 26, 2010

  • 115 Answers

SOURCE: 1998 Mazda B4000 (similar to Ford Ranger).

With it being an intermittant problem that indicates a possible electrical short. It's not likely that any parts would need to be changed. I hope this is helpful.

Posted on Mar 15, 2010

SOURCE: Where is the fuel filter on a 1994 Mazda b4000 pickup?

Driver side frame rail right where the door is. It's held in by a large hose clamp. It has 2 white plastic clips . 1 on each hose of the filter. When removing have a container that can hold gas ready because about a pint of gas will come out. Make sure new filter comes with new clips. I don't recommend using old ones. After new one in place turn key on and leave in run position for 20 seconds so filter can gill with fuel before starting and inspect fir leaks.

Posted on Apr 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 mazda b4000


The calipers are overloading and not fully releasing the rotors. Have you changed the proportioning valve in the brake system? You may want to start there.

Oct 16, 2012 | Chevrolet Malibu Cars & Trucks

1 Answer

1998 Mazda B4000 (similar to Ford Ranger). Wipers, dome light and 4 wheel drive selector switch work intermitantly. I would like to know what is the problem and what parts should be replaced. Mike


With it being an intermittant problem that indicates a possible electrical short. It's not likely that any parts would need to be changed. I hope this is helpful.

Mar 15, 2010 | 1998 Mazda B-Series

1 Answer

How long does it take to replace a mazda b4000


To remove and replace heater core 7.1 hrs
Plus 1.4 hrs to recover a/c system, evacuate and recharge a/c system, if your a/c is working.
These labor time's per Mitchell labor guide, a guide book used by repair shop's.

Jan 26, 2010 | Mazda B4000 Cars & Trucks

1 Answer

Changing rear brakes on 1998 mazda B4000


make sure your brake adjuster is backed all the way off then gently tap all the way around the back to remove

Apr 04, 2009 | 2007 Mazda B4000

1 Answer

2000 MAZDA B4000 ELECTRIC DOOR LOCKS NOT WORKING


i had the same problem .... i changed the actuators and they work like new now.

Jan 15, 2009 | 2007 Mazda B4000

Not finding what you are looking for?
1999 Mazda Pickup Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...