Question about 1995 Honda Civic

1 Answer

I was driving down the road and the car just jerked. It had popped out of gear. I couldnt get it to go back into gear. The clutch still works, but its the shifting im having a problem with. No matter what gear i try to put the car in it stays in what i believe is third. No neutral, no first, no reverse.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 76,118 Answers

I need you to go under the hood and look at where the shift cables attach to the transmission, do they move when the shifter in the car is moved to all the different gears? You really only have a few choices here as to what is causing this, the shifter is broken, or the cables are broken, or the transmission has broken internally, the whole shifting mechanism must be inspected by a skilled technican to ID what is causing this in order to decide which of the above is the actual problem. I am sorry I can't give a more definite answer but a visual and hands on inspection is what is needed here.. This will not get fixed on the road you will need to have it towed to a transmission shop.

Posted on Apr 07, 2011

  • yadayada
    yadayada Apr 08, 2011

    I wanted to add that based on the symptom you experienced I believe that something inside the transmission has failed and the linkage is not the problem. I assume you did not touch the gear shift before this happened.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

.2004 Pontiac Grand Am 5 speed I heard a loud pop driving down the road and I had no gears the car will not shift into gear at all what could be the problem


A clutch band in the transmission broke. Basically a rebuild. unless you know some one that will just replace it..

Apr 06, 2016 | Pontiac Cars & Trucks

2 Answers

As I would drive the 2000 ford focus I'm not sure if it was the clutch or the transmission but its like the car would go to a lower gear for a minute and then catch back up. Then I happened to be driving...


I believe it's your clutch. If you can shift gears okay with the engine off, but you cannot shift gears with the engine running, (the gear shifter only grinds when trying to shift into first?) then your clutch has worn out.
To replace a clutch, the transaxle has to be first removed from the car. I'm afraid you will have to have it towed to a shop or garage.

Nov 08, 2013 | Cars & Trucks

2 Answers

Squealing noise stops when i push in clutch pedal we were on the interstate and suddenly i had no clutch pedal we got off the street it was hard to get it out of gear i checked the fluid it was fine...


Sounds like a bad Throw Out Bearing.. Needless to say.. it has to be repaired.

Depending on mileage.. may as well replace the clutch/pressure plate.. and have he flywheel looked at.. change the tranny oil.. check the u joints.. rear end etc..

Best of luck!

Apr 09, 2011 | 1997 Chevrolet Camaro

1 Answer

Clutch wont disengage and i can push the car when


That burnt smell is what used to be your clutch disk, and you will need to replace the clutch before you will be able to drive that vehicle again. You should purchase a complete clutch kit for your vehicle, and it should come with a new pressure plate, clutch disk, throw-out/release bearing, a pilot bearing, and a clutch disk alignment tool, and be sure that the pilot bearing is replaced when that new clutch is installed.

Jun 04, 2010 | 1999 Saturn SL

1 Answer

1996 Auto Jetta "jerking" into 1st and 2nd gears


have shop road test and scan possible solinoid

Apr 21, 2010 | 1996 Volkswagen Jetta

3 Answers

Car wont go into gear


Have you ever replaced the clutch? If not you may need a new cluctch. It could also be your clutch slave cylinder.

The latter is much less expensive and in some cars very easy to change (i did it myself on an old Mazda Rx-7 and I'm a girl!). Hope these suggestions help.

Jul 10, 2009 | 1996 Nissan Maxima

1 Answer

1990 yj manual trans will not go in any gear


possibly hydraulic clutch fluid? i have a 2002, not sure if the 93 has hydraulic clutch fluid but you might just want to check it to be safe good luck

Sep 06, 2008 | 1993 Jeep Wrangler

Not finding what you are looking for?
1995 Honda Civic Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...