Question about 1999 Buick Century

Open Question

Near the two power steering hose behind the siepentin belt i have a coolant leak that i cant find

Posted by on

  • yadayada
    yadayada Apr 07, 2011

    Waterpump?

  • glennybarra Apr 07, 2011

    thanks that what i had come up with too just wanted to check

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

imdbest69tex
  • 2 Answers

SOURCE: power steering fluid leaking;

it is probaly your high pressure power steering line

Posted on Aug 13, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Leaking coolant.. its hard to see where it is coming from.. it leaks out heavily when car is cranked,, it looks like it is comin from right behind the belt drive (the bigger one) is that the water pump?


This does sound like your water pump is leaking, or your head gasket has busted on the outside edge. I would check the water pump first, as it is fairly common for the seal to bust and leak coolant from the water pump.

Feb 16, 2011 | 2004 Pontiac Grand Prix

1 Answer

Leaking oil front right of engine 323i 2000?


This could be power steering fluid...a common leak on all BMW's or an upper valve cover gasket leak.

The hoses on the power steering are clamped with a ring clamp and the rubber shrinks slightly and fluid leaks out. You can replace all those clamps with conventional Hose Clamps from your parts store. The power steering oil reservoir has a lower hose from it which commonly leaks.

It leaks onto the coolant hose running below it and the coolant hose eventually splits, discharging all the coolant.

If it is the cam cover gasket, this involves a little more work. The gasket is available from you dealer or parts house.

Feb 16, 2011 | 1999 BMW 323 Series

1 Answer

Power steering pump change how to?


3.1L and 3.4L (VIN E) Engines


0900c15280217fc8.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Power steering pump mounting-3.1L and 3.4L (VIN E) engines

  1. Disconnect the negative battery cable.
  2. Remove the coolant recovery reservoir and position it aside.
  3. Remove the serpentine drive belt from the power steering pump assembly.
  4. Detach the ignition control wiring harness near the pump assembly.
  5. Disconnect the inlet and outlet hoses from the pump assembly.
  6. Unfasten the pump retaining bolts/screws.
  7. Remove the pump assembly from the vehicle.
  8. Remove the power steering pump pulley from the pump assembly.
  9. Remove the reservoir assembly from the pump.

To install:
  1. Attach the reservoir to the pump assembly.
  2. Install the pulley to the pump.
  3. Position the pump to the engine and secure with the retaining bolts/screws. Tighten the bolts/screws to 25 ft. lbs. (34 Nm).
  4. Connect the inlet and outlet hoses to the power steering pump.
  5. Attach the ignition control wiring harness at the pump assembly.
  6. Install the serpentine drive belt over the power steering pump pulley.
  7. Install the coolant recovery reservoir.
  8. Connect the negative battery cable.
  9. Fill and bleed the power steering system.

Feb 09, 2011 | 1999 Oldsmobile Intrigue

1 Answer

Cant find were to put powersteering fluid


Power Steering Pump Removal & Installation 3.8L Engine To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Place a drain pan under the vehicle.
  3. Remove the accessory drive belt from the power steering pump pulley.
  4. Raise and safely support the vehicle.
  5. Remove the right front tire and wheel assembly.
  6. Remove the hoses from the power steering pump.
  7. Remove the mounting bolts and the power steering pump from the engine.
  8. Remove the reservoir and pulley from the pump if necessary.
To Install:
Power steering pump removal/installation (3.8L engine) gm-08-38-480.gif

  1. If removed, install the power steering pump reservoir and pulley on the power steering pump.
  2. Position the power steering pump to the engine and install the mounting bolts. Tighten the bolts to 25 lb ft (34 Nm).
  3. Install the pressure and return hoses to the pump.
  4. Install the right front tire and wheel assembly.
  5. Lower the vehicle.
  6. Install the accessory drive belt.
  7. Fill and bleed the power steering system.
  8. Inspect the system for leaks.
  9. Remove the drain pan from under the power steering pump area.
3.4L Engine To Remove:
  1. Place a drain pan under the power steering pump.
  2. Remove the coolant reservoir.
  3. Remove the pulley from the power steering pump.
  4. Remove the wiring harness near the power steering pump and place it out of the way.
  5. Disconnect the fluid hoses from the power steering pump.
  6. Remove the mounting bolts from the power steering pump and remove the pump.
To Install:
Power steering pump removal/installation (3.4L engine) 88008g71.gif

  1. Position the power steering pump assembly to the engine and install the mounting bolts. Tighten the mounting bolts to 25 lb ft (34 Nm).
  2. Install the wiring harness in its original position.
  3. Install the pulley on the power steering pump.
  4. Install the coolant reservoir.
  5. Fill and bleed the power steering system.
  6. Inspect the system for leaks.
  7. Remove the drain pan from under the power steering pump.
prev.gif next.gif

Sep 18, 2010 | 2000 Chevrolet Impala

2 Answers

Where is the power steering dipstick


Most power steering pumps are driven by the serpentine belt and should be in plain view when the hood is open.The following shows how to remove and replace the power steering pump and might give you a clue if not in plain sight. My dad's 1998 Ford Taurus has it nearly on top, but they could have changed things in the mean time: Power Steering Pump Removal & Installation Power Steering Pump (2V) To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the accessory drive belt.
  4. Remove the alternator.
  5. Drain and remove the radiator coolant recovery reservoir.
  6. Position a drain pan under the power steering pump underneath the vehicle. Disconnect the hydraulic pressure and return lines and allow to drain.
  7. Remove the idler pulley from the power steering pump support.
  8. Remove the belt tensioner.
  9. Remove the bracket mounting bolt located under the belt tensioner mounting.
  10. Remove two retaining nuts from the bracket mounting studs. Remove both mounting studs, and pull off the power steering pump support with the pump attached.
  11. Clamp the pump support bracket in a suitable vise.
  12. Remove the power steering pump pulley from the pump shaft using Pump Pulley Remover T69L-10300-B, or equivalent. Remove the three bolts retaining the power steering pump to the power steering pump support and remove the power steering pump.
To Install:
NOTE: The pulley must be installed within 0.010 in (0.25 mm) flush with the power steering pump shaft.
Power steering pump special tools ford-08-00-401.gif

  1. Install the power steering pump to the power steering pump support. Tighten the mounting bolts to 18 ft-lb. (25 Nm).
  2. Install the power steering pump pulley using Steering Pump Pulley Replacer T65P-3A733-C, or equivalent; the pulley face must be flush within 0.010 inch (0.25mm) of the pump shaft.
  3. Install the power steering pump/pump support and torque nuts/bolt to 24 ft. lbs. (33 Nm).
  4. Install the bracket mounting bolt located under the belt tensioner mounting.
  5. Install the belt tensioner.
  6. Install the idler pulley to the power steering pump support.
  7. Connect the hydraulic pressure and return lines.
  8. Install the radiator coolant recovery reservoir.
  9. Install the alternator.
  10. Install the accessory drive belt.
  11. Fill the power steering reservoir with power steering fluid.
  12. Connect the battery ground cable.
  13. Run the engine and check for leaks and proper operation. Bleed the power steering system if needed.
Power Steering Pump (4V) and SHO To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Disconnect the battery ground cable.
  3. Remove the accessory drive belt.
  4. Drain and remove the radiator coolant recovery reservoir.
  5. Position a drain pan under the power steering pump. Disconnect the power steering pump reservoir hose and allow it to drain.
  6. Using Pulley Remover T69L-10300-B, or equivalent, remove the pulley from the power steering pump shaft.
  7. Disconnect the pressure hose from the power steering pump and allow it to drain.
  8. Remove the power steering pump retaining bolts and the pump.
To Install:
  1. Install the power steering pump and tighten the bolts 15–22 ft. lbs. (20–30 Nm).
  2. Connect the pressure hose and secure the clamp.
  3. Using a Steering Pump Pulley Replacer T65P-3A733-C, or equivalent, install the power steering pump pulley: the pulley face must be flush with the pump shaft or within 0.010 inch (0.25mm).
  4. Connect the power steering pump reservoir hose.
  5. Install the radiator coolant recovery reservoir.
  6. Install the accessory drive belt.
  7. Fill the power steering reservoir with power steering fluid.
  8. Connect the battery ground cable.
  9. Start the engine and check for leaks and proper operation. Bleed the power steering system if needed.
prev.gif next.gif

Jul 22, 2010 | 1996 Ford Taurus

1 Answer

Need to locate power steering pump for 1996 buick


The power steering reservoir will be on the left side (near the passenger front wheel) behind the coolant reservoir. It's a black tank with orange lettering on the cap. If you follow the hoses off of it, they'll lead you directly to the pump.

Apr 13, 2009 | 1996 Buick Roadmaster

3 Answers

Coolant leak


coolant leak may be coming from intake manifold gaskets,4.3 is notorius for leaking coolant from behind the mainfold in those years

Mar 29, 2009 | 2001 Chevrolet Blazer

2 Answers

Power steering fluid leak


check the lines to the rack and pinion,,,,cpild have a ruptured line

Nov 16, 2008 | 2004 Jeep Liberty

Not finding what you are looking for?
1999 Buick Century Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...