SOURCE: service traction light comes on abs off and brake light come on on the dash
I had the same problem. I took off the tires and look at the wires, and both of the wires to the hub were broke. 10 min and some tape and problem was fixed.
SOURCE: TURN RT APPLY BRAKES ABS/TRAC OFF COMES ON
bad front bearing/abs sensor The sensor is part of the bearing,or the wires are bad so that when you steer it open circuts and thinks the wheel is stopped. need to read codes or use a scan tool with live data to see which wheel the computer thinks is stopping. then look at that wheel for problems
SOURCE: 2000 montana brakes shutter and the abs light and
i had the same problem on my 2000 montana, used a scanner to check for abs code and found right front sensor throwing code, checked sensor and found ok, checked harness from sensor to connection under hood and found wiring circut at the plastic clip where harness hooks to sensor was bad, replaced harness from connector to sensor and problem went away
SOURCE: abs and traction control lights coming on
Its the abs sensor, if you encounter an ice patch or snow you won't even be able to stop because the pedal will will push back and make the rip grind noise. If you pull the ABS fuse out, you won't have ABS but you can stop and you won't have the grind noise and back pressure for now. Its safer to not have ABS when the sensor is faulty.
Simon Atari
[email protected]
SOURCE: the service ABS System light comes on and also the
Possibly has a bad wheel sensor or bad bearing. It would be easiest to have a garage put a scan tool that has ABS software to better find the problem.
Testimonial: "thank you much appreciated"
196 views
Usually answered in minutes!
×