Question about 2005 Buick Rendezvous
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: replace the fog light bulb.
you don't. you disconnect the wire on the back of the light assembly and then the bulb twists counter clockwise and pops out, to re-install reverse the procedure. the wire is accessible from below the car under a black plastic flap the pulls down out of the way directly underneath the fog light.
Posted on Oct 27, 2008
the BCM needs to be programmed to operate the computer. a GM techII is now required to calibrate BCM to airbag, stereo, keyless entry, and control pcm data. This is required to make it all work. a gm service should have it done within an hour or less just call and ask them how much it would be to program new BCM. it might cost @$75 to $125 but it is needed, to allow the BCM to work properly.
Posted on Sep 11, 2009
Testimonial: "ok...i bought the bcm on line (used)...but the gays in the dealer says i have to buy a new one..because the used cannot be to reflashed...or recoded."
Sounds like you may have a leak in the heater core and the fan is blowing anti-freeze (the sweet smell) through the vents.
Posted on Jan 28, 2010
the panel has trim around it youll have to take the trim off pry under it with a straight edge or flat screwdriver this will give you access to the screws that keep the cluster in place undo the screws usually phillips head and pull the panel out on the back side of the panel you will see tabs protruding from the panel thise is where your bulbs are housed theres one for each bulb locate the one that has your blown bulb in it turn counter clockwise and pull up this will release the holder pull the bulb out push the new one in and reverse the process to reinstall.
Posted on May 04, 2010
SOUND LIKE PROBLEMS IN THE EBTCM OR THE ELECTRONIC BRAKE CONTROL MODULE AND TRACTION CONTROL MODULE.ALL YOU CAN DO IS CHECK ABS FUSES AND RELAYS.IF ALL IS GOOD THE DEALERSHIP HAS TO USE A TECH SCANNER TO FIX THE PROBLEM.
Posted on Jun 27, 2010
Tips for a great answer:
May 10, 2016 | Buick Cars & Trucks
Sep 12, 2015 | 2004 Buick Rendezvous
Mar 21, 2015 | Buick Rendezvous Cars & Trucks
Nov 06, 2013 | 2002 Buick Rendezvous
Mar 05, 2012 | 2003 Buick Regal
Apr 25, 2017 | 2007 Buick Rendezvous CXL SUV
Sep 16, 2010 | Buick Rendezvous Cars & Trucks
Jan 28, 2010 | 2003 Buick Rendezvous
Jun 17, 2008 | 2003 Buick Rendezvous
Jul 23, 2017 | 2005 Buick Rendezvous
156 people viewed this question
Usually answered in minutes!