Question about Jeep Cherokee

1 Answer

Buddy of my has a 1990-96 or so jeep cherokee that has a problem with the brakes ...something about electronic module controlling a hydralic module ...something like the dealership recalled them back in the day and replece it with a single vacuum motor ..im intersted in buying it but cant find any info on the issue or remedy.. if you could give some input into what the old part was called or what the new part may be thanks in advance , Tom J

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Part you're probably looking for is the ABS pump motor or pump motor relay.
Personally though you'd probably be better off checking the line routing for a non abs vehicle and copying it, eliminating the abs system. (scrapyard is a good place to look for "hard" parts and to actually see how lines run, but do use new lines).
The abs system functions just like "normal" brakes when the pump fails, so, it should be ok to drive it that way unless there is something else wrong (leaks etc)

Posted on Apr 08, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering control module


go to a towyard and find one cheaper..

Feb 10, 2013 | 2005 Jeep Grand Cherokee

1 Answer

How can I disable jeep grand cherokee security system


Hi Andrew:
The 1994 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running. I have an '93 GC 5.2L V8...

The following wiring diagram and electronics circuit contains detail schematics of The 1994 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 25, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Jeep grand cherokee alarm system


The 1995 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 25, 2011 | 1995 Jeep Grand Cherokee

1 Answer

1993 jeep power locks dont work lights flash and security flashes. the remote will not unlock or lock the doors


Sound like a problem with the SECURITY SISTEM also called Antitheft system; try to solving applied this procedure.

The following wiring diagram and electronics circuit contains detail schematics of The 1993-1998 Jeep Grand Cherokee Laredo Anti-Theft System. Here in you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures: Alarm_Jeep_Cherokee.pdf

Good luck.

Sep 27, 2011 | 1993 Jeep Grand Cherokee

2 Answers

1996 jeep grand cherokee- while driving all gauges stopped working and all dash light were flickering on and off. then all went back to normal but since then passenger side windows and door locks will not...


I would start by scanning the engine control module and the body control module and the antilock brake control module and the transmission control module and the airbag module to see if there are any fault codes that indicate a loss of power to the modules. It may tell me which circuit malfunctioned. If that does not give me a clue, I would then start to diagnose the window circuits by first checking for power at the master switch and move to the rest of the power window system from there.

As for fuses or where to start...I think you should probably read these articles before doing anything:

Where's The Fuse?

What Else Could Be Wrong?

May 08, 2011 | 1996 Jeep Grand Cherokee

1 Answer

1999 Grand Cherokee Limited Jeep anti-theft system had shut all electronics down and engine will not start. what can I do to reset the system....


The 1996 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running.

The following wiring diagram and electronics circuit contains detail schematics of The 1996 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE.

Also, remember that here can find the Jeep Grand Cherokee Service & Repair Manual.
Hope help with this.

May 03, 2010 | 1999 Jeep Grand Cherokee

2 Answers

1997 GRAND CHEROKEE LIMITED BRAKE JUDDER SOMETIMES WHEN BRAKING ,NOW ABS LIGHT ON ALL THE TIME


First off.....I hate when "Someone" says "take it to a mechanic"....if he wanted to take it to a mechanic he would. Maybe he doesn't want to be screwed. Search around at jeepforum.com you'll find some info instead of lame opinions like take it to dealer etc....

Jul 04, 2009 | 1998 Jeep Cherokee

2 Answers

2005 Jeep Grand Cherokee (HEMI) Service Electric Brake System


Problem is a faulty Steering Angle Sensor (part of Steering Module) located in steering column ...replacement part $600.00.

Apr 14, 2009 | 2005 Jeep Grand Cherokee

1 Answer

Both the abs and brake light is on and stays on what could be wro


Your ABS systems use a combination of electronic and hydraulic systems to modulate the brakes individually to prevent them from locking up. Antilock systems consist of wheel speed sensors, a hydraulic control unit (HCU), and an electronic control unit (ECU). Because of how complex the system is your computer does a self-test. If the check is successful, the ANTILOCK and BRAKE lights will go out within a few seconds. If one of the component of the ABS system fails to pass the test one or both lights will remain lit. One or both warning lights may also come on while driving, also indicating a problem. If just the ANTILOCK warning light comes on, some ABS component has failed, but the car still has hydraulic brakes. You or a technician will have to perform further testing to pinpoint cause and the proper repair.

Please let me know if this information is helpful. Positive feedback is appreciated. Thank You!

Mar 30, 2009 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...