Question about Isuzu Rodeo

1 Answer

Hi i have a 1999 isuzu rodeo 3.2 v6 i had the heads machined and at the machine shop they turned the cam sprockets and now i have no idea how to top dead center the heads on both banks, the timing is all screwed up also if you can i also need to know the timing mark on the block too just to be sure thank you, let me know how the lobes on each head is suppose to be pointing.....

Posted by on

  • edward lai Apr 07, 2011

    Hey there

    Send it to jasesaeteurn03@yahoo.com

    Thanks

  • edward lai Apr 07, 2011

    much thanx

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,702 Answers

Please send me your e-mail and i will send the timing spec. fixya does not have enough MB on there sight for the diagram.

Posted on Apr 07, 2011

  • john nail
    john nail Apr 08, 2011

    just sent your stuff, good luck

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the crankshaft position sensor on a 2004 isuzu rodeo 3.5


2004 no vin code posted nor the 8th VIN digit for engine code
so answers get 10x harder, lacking that one fact. USA car?
Coin toss 1:
learn the real name of engine, first
6vE1, 4 cams, and last year has VVT, (not trivial that)
and has 2 Cam sensors. to make VVT happy,. dig?
weve answered this many times here, over and over
did the scan tool tell you its bad.?
its on the rear of both heads,

the post above is wrong, he shows the 6vd1w engine,
here just for fun, again i post all V6,s just for you, and others too lazy to search or learn engine REAL NAME.

ill do all 3 V6 engines now.

3de1f741-1946-4f53-9161-03418aaee9a6.jpg


32dohc-kak3wjrwg2pwaolcwur0ctxj-2-2.jpg


32sohc-kak3wjrwg2pwaolcwur0ctxj-2-3.jpg


6ve1-kak3wjrwg2pwaolcwur0ctxj-2-4.jpg


left96-kak3wjrwg2pwaolcwur0ctxj-2-5.jpg


vin2004-kak3wjrwg2pwaolcwur0ctxj-2-6.jpg

Mar 18, 2017 | Isuzu Cars & Trucks

1 Answer

Is a 1999 isuzu rodeo sport 2wd v6 auto trans idle air replacement valve interchangeable with a 1999 isuzu amigo sport


double posted why, ? please add to 1 post,
by edits or comments, please'
there are 3 , v6 engines, you never said which
why ask us, about parts, we dont sell parts
and would have to read the same books on parts as you
why ask use to do that.?
here is the list
USA only, RODEO, prime examples. the GAS v6 engines. 3.1L 3.2L 6vd1 SOHC, one cam per head, then the optional... 6vd1w DOHC, 2 cams in one head, w = DOHC optioned heads, then came... 3.5L (a stroked out, 3.2L.) 6ve1 are all DOHC engines. and have 24 valves. (6x4) with 2 rear cam sensor, used for VVT and spark both,
the engines must match ,to mix parts

here im at isuzu.com parts page
note it changed on August 99, mfg build dates. so.....
tricky
this will not cause low MPG
it will cause idle controls to be dead.
why not post all symptoms, first. and stop guessing?

iac-oxkqb5rw1cdtny1acrjczugf-5-0.png

Feb 12, 2017 | 1999 Isuzu Amigo

1 Answer

I have a isuzu rodeo 1999, and I need to get the bolts for the flywheel but I don't know the metric of them.


Diego del Rabal,

You don't want to take a 10, 11 & 12mm sockets with you under the vehicle... I'm not sure you are saying you lost your original bolts... ??

There is a lot more technical specifications to those BOLTS than their size, hardness, length... (etc.).

HARDWARE STORE won't cut it!!

Go to the dealer and ask for more...

and don't forget the throw-out & pilot while you are there!!

More Information for SACHS NFW4001

1999 ISUZU RODEO 3 2L V6 Flywheel RockAuto

1999 ISUZU RODEO 3 2L V6 Clutch Pressure Plate RockAuto

More Information for SACHS SC70107

Aug 11, 2016 | Isuzu Cars & Trucks

1 Answer

Are the block and heads the same in an 98 Isuzu Rodeo 3.2 and a 2001 Isuzu Rodeo 3.2?


3 places you can get the answer.
1) dealer parts department
2) a salvage yard or parts store like auto zone or advanced auto.
3) a machine shop that does head repair. I would start here and have the donor head checked before i installed it and then found out it wasn't flat.

May 18, 2014 | Isuzu Rodeo Cars & Trucks

1 Answer

Where is the location of camshaft sensor 1998 isuzu trooper


if its diesel 4JX1 its in top cam belt cover cant miss it, sensor is very clearly visible.
if its petrol V6 (6VD1 or 6VE1) its in left head at rear behind inlet manifold
these pictures are for petrol V6, Jackaroo(Trooper) and Holden Rodeo are the same.

stevenhurc_21.jpg



stevenhurc_22.jpg

Apr 10, 2011 | 1998 Isuzu Trooper

1 Answer

Where is the nock senseser?? On a 99 Isuzu rodeo V6


If it is a v6 then they should be in the valley between to two heads and under the intake manifold. if it is a four cyl. check high on the block on the intake side.

Aug 19, 2010 | 1999 Isuzu Rodeo

1 Answer

What and where are the line up marks on the crank pulley and the two cam pulleys The belt had been removed before I got to it. I can see the marks on the two gam pulleys and presume the exhaust lines up...


Click on the following direct, Free Link. It has Diagrams and Instructions including the Timing Belt + Marks for your 1999 Isuzu Rodeo 3.2L DOHC V6. There are additional Diagrams that will prove to be helpful while you are doing this...

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/rodeo/1999_isuzu_rodeo_timing_belt_diagram_marks.htm

Apr 18, 2010 | 1999 Isuzu Rodeo

2 Answers

Installation of a 1999 peugeot 306 1.4L timing belt. Where are the marks?


piston tdc no1 and follow valves so no1 with both valves closed then look for mark ,seem to remember its up top on the cover somewhere ,and crank keyway points up as well

Jun 28, 2009 | 1997 Isuzu Rodeo

2 Answers

Is my '99 Isuzu Rodeo a single OR a dual cam? How can I find out?


HI.....
1999 Isuzo Rodeo. 3.5 L or 3.2L V6. Is a DOHC. Double over head cam.
and the engine 2.2 L 4cyl. SOHC, single over head cam.
The angibe 2.3 L 4cyl. Is DOHC.

OK.. I hope this help on your question.

Thank you for use fixya...

Aug 07, 2008 | 1999 Isuzu Rodeo

1 Answer

Changing a head gasket on a 1984 rodeo 2000 g200 kb28 with a sohc. How do i take off the timing chain?


there is a special tool. it holds the chain against the hydraulic tensioner and on the cam sprocket. you need this to prevent tensioner from loosing its prime and keep the timing from moving. once tool is in place remove bolt holding cam sprocket and you lift head off leaving chain and sprocket in place.

Jul 08, 2008 | 2000 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...