Question about 1997 Jeep Grand Cherokee

1 Answer

On my 1997 Jeep Grand Cherokee Tsi the information center keeps flashing rear lamp failure. I replaced the license plate lamps but it still flashes. Is there a way to reset this??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Mine did the same I found out it was a break light out in the third break light. Easy to remove with a screwdriver. Replaced the bulbs and the warning went away.

Posted on May 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace License Plate Bulb '96 Jeep Grand Cherokee Limited


Hi Timmy:

Check this procedure from Repair manual...


LICENSE PLATE LAMP - REMOVAL
(1) Remove screws and license plate lamp visor from liftgate (Fig. 10).
(2) Remove bulb from lamp socket.

INSTALLATION
(1) Install a bulb in lamp socket.
(2) Position license plate lamp visor on liftgate and install screws (Fig 10).


4_28_2012_5_22_57_pm.jpg


Hope this helps.

Apr 28, 2012 | 1996 Jeep Grand Cherokee

1 Answer

The Rear Lamp Failure light comes on, and Ii have no been able to locate where this is located. I do not have an owners manual. I have checked the tail lights, brake lights, even the tag lights, and I am...


Nice SUV, I have the same with 5.2L V8 Limited!!!

Are you sure that there are no lights out?pay attention to the third brake light because it has 3 bulbs and if one is outit will give you that message.also make sure that all of the bulbs are the right ones.

I used to get the "Rear Lamp Failure" message on my '93 Limited after the lights were on for a few minutes... it went away when I changed the rear bulbs to the same brand. The Lamp Outage Module (located in the LR quarter panel, near the fuel filler) is looking for differences in current flow between the left and right side bulbs.

You probably need a new lamp outage module...
CIRCUIT OPERATION
The Lamp Outage Module (LOM) determines if a rear lighting lamp is not operating. When the ignition switch is in the START or RUN position, circuit A1 from fuse 8 in the Power Distribution Center (PDC) connects to circuit A21. Circuit A21 feeds circuit F87 through fuse 5 in the junction block. Circuits F87 feeds the LOM.
- Circuit G46 from the LOM connects to the Vehicle Information Center (VIC) . When the LOM senses a inoperative lamp, the VIC displays the data to the vehicle operator.
- Circuit L90 which feeds the tail lamps and side marker lamps, connects to the LOM. From the LOM, circuit L90 continues to the license plate lamps. Circuits L21 and L22 from the LOM power the tail lamps and side marker lamps.
- Circuit L50 from the stop lamp switch connects to the LOM. From the LOM, circuits L73 and L74 power the stop lamps and circuit L87 powers the Center High Mounted Stop Lamps (CHMSL) . Circuit Z1 grounds the LOM.


If you need tha owners and repair manual about your ZJ Grand Cherokee, just keep in touch and send me one comment.

Hope this helps (remember to rate this answer).

Jan 14, 2011 | 1993 Jeep Grand Cherokee

1 Answer

My night time running lights won't turn on in a 1997Jeep Grand Cherokee Laredo. How do i fix it?


Might just be the fuse is blown. It could be labeled license plate/park lamp fuse in the fuse box.

Jan 13, 2011 | 1997 Jeep Grand Cherokee

1 Answer

My Jeep Grand cherokee 1996 says "rear lamp failure" but my lights still work, what does this mean?


Make sure you look really close at the bulbs. There can be side markers, license bulbs, reverse lights, and third brake lights out

Sep 26, 2010 | 1996 Jeep Grand Cherokee

2 Answers

Just bought my 94 jeep cherokee & the screen in the middle consol continues me beep and flash ''rear lamp failure''


the driver information center(DIC) is telling you one or more of your rear light bulbs has failed. it could be a tail light,stop light,center high mount stop light,turn signal or license plate light. have someone in the vehicle turn the lights on and hit the brakes and turn signals so you can see which one is burned out.

Nov 06, 2009 | 1994 Jeep Grand Cherokee

2 Answers

Computer flashes tail lamp failure and my tail lights and liciense plate light all work. what is the problem?


Hello and welcome to Fixya.com.
Check to see if you have twin tail lamp bulbs on rear i mean when i say this two tail lamp bulbs fitted to each side,check to see if one of the bulbs has blown if so replace it this will correct your computor.
Best regards.
George...

Jul 23, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Open rear window 1997 jeep grand cherokee lorado 4wd


There is a button above the license plate you have to push up on it make sure the door locks are unlocked.

Jun 03, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Rear light failure?


Hey, my 1998 Jeep Grand Cherokee did the same thing and it took me a long time to find a solution. It turned out, at least in my case, that there was a burnt out bulb just above the license plate. When I replaced it the warning went away.

May 17, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Info center


Have any lamps been replaced in the rear? If so, the lamps have to be the same because the info center checks the the resistance of the bulbs. You can not substitute a 2057 for a 1057.

Feb 09, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1997 Jeep Grand Cherokee Logo

435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...