Question about 1986 Chevrolet Chevy

1 Answer

I have a 1986 chevy S10 2wd 2.5 liter tbi, not getting any fuel out of the injector. got good pressure changed the injector, halls effect switch, ecm slill nothing. I can put fuel in the thottle body and the truck starts right up and runs till gas is gone.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Somthing may be wrong with the security. is fuel coming out of the other injector? if it is then you may have a security issue.

Posted on Apr 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a TBI on my Chevy and when I turn the key on it keeps running the fuel pump after the 2 seconds like to know what to look for and where to find it


didnt specify year model or engine --generic answer --if the tbi is flooding ---check the fuel pressure regulator --and the tbi itself

Apr 16, 2017 | Cars & Trucks

1 Answer

No fuel spray from injectos


1986 chevy s10 2.5l no gas coming from injector. - S-10 Forum

www.s10forum.com/.../1986-chevy-s10-2-5l-no-gas-coming-from-inject...
Sep 2, 2009 - 24 posts - ‎7 authors I have no gas coming from my injector it a 1986 chevy s10 2.5l I have replaced the fuel pump,oil pressure switch & I checked and oil would ...

Oct 12, 2015 | 1988 Chevrolet S-10

3 Answers

1991 GMC Sierra loses fuel pressure after it reaches the TBI


think u could hav a computer problem-go n get car code scanned OBD style-do u hav a repair manual-chec wiring also-fuel pump could be failin

Sep 01, 2009 | 1993 GMC Sierra

1 Answer

Chevy S-10 Start problems


If hall effect switch was bad you wouldn't get any spark.What year 2.5L is this?Is this a 2 injector Throttle Body? The pink wire on top of injectors comes thru a 20Amp fuse controlled by the Ignition switch you should have battery voltage with key on The dark green and dark blue wires come from the pcm which are called injector drivers the drivers supply a pulsating ground if you crank the engine with a test light between either pink/dk green or pink/dk blue test light should flash dimmlythat would mean injectors are being driven but there isn't any fuel at the injector or the injectors are bad no pulse means either a bad computer ( which these drivers are known for going bad)or the computer isn't being commanded to fire the injectors.

Aug 22, 2009 | 1988 Chevrolet S-10

2 Answers

1987 chevy S10 engine idle problem


relace the throtle air idle valve.The temp switch will allso cause this problem.

Jul 19, 2009 | 1987 Chevrolet S-10 Pickup

2 Answers

1987 chevy engine problem


you have to reset base idle see manual at library for procedure

Jul 19, 2009 | 1987 Chevrolet S-10 Pickup

5 Answers

1987 chevy s10 2.5l tbi will not start. changed bad fuel pump works well now strong pressure to throttle body. change fuel pressure switch, oil pressure switch, o2 sensor, map sensor, distrib cap, rotor,...


That eliminates the crankshaft and camshaft position sensors. Have you checked the fuel injector itself for an open winding or stuck valve plunger? There should not be a steady 12 volts to the injector--if good injector, it would be spraying fuel steadily into the throttle body. But at least the engine should try to run if poorly. Take the injector out, dry it off with air, and intermittently apply 12 volts to one terminal while grounding the other. You should hear a click from inside every time you touch 12 volts. If not, replace it. If it does, it may be plugged with debris. Try blowing through it in reverse with compressed air.

Jul 17, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

1987 Chevy S10 TBI 4cyl 2.5 L will not run. I changed a weak fuel pump and i am now getting good pressure. I swapped ecm's, changed fuel pressure switch, oil pressure switch, distrib, rotor, electronic...


Check the injector for 12v on one wire. if good check the other wire for a ground witth the key on. The ground wire pulses from the ECM If you dont have 12v from one wire to the other but you have 12v from one wire to battery ground then be sure the ground wire is good to the computer. If you don't have 12 v at any time check for open hot wire or bad fuse. ADD 12v to the hot wire at the injector. DO NOT add to the wrong wire or you will fry the computer

Jul 15, 2009 | 1987 Chevrolet S-10 Pickup

1 Answer

1983 buick skyhawk 2.0 with TBI not sparying fuel


change the crank sensor.No the ECM has no internal oil components

Jul 07, 2009 | 1983 Buick Skyhawk

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...