Question about 2004 Land Rover Range Rover
Welcome to Fixya
Air suspension is currently in fault mode. It will have to be re-set by someone who has the Land Rover scantool (either a dealer or an independent shop). The EAS system is inaccessible with a regular OBDII scantool. The car will not allow you to control the suspension height (raise/lower/defeat) until the fault is cleared. Please see this link .
Thank you for using Fixya!
Posted on Apr 07, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I AVE 04 RR AND LEFT PASSENGER SIDE AIR SUSPENSION REPLACED IN 12/09 NOW THE ENTIRE FRONT WILL NO RAISE UP! WHA SHOULD I DO???
Posted on Mar 19, 2011
SOURCE: hi.. i have a 2004
The EAS can have many different faults that will give the same warning. I have had several air susp problems. First try to disconnect the battery, wait several minutes reconnect then drive car making at least on full circle. If lights remain, air pump (under spare tire ) can be checked, also valve under a cover behind right front wheel, other than these areas, the Testbook diagnostic at dealer will determine if any other parts are source of problem. Unfortunately, with the complexity of the system many other parts Height sensors, etc, etc can also cause the error message. Good Luck.
Posted on Apr 17, 2009
SOURCE: air suspension inactive
you can try turning the ignition on and off , only to position two ond off with out starting , between 20 - 30 times this sometimes confuses modules and causes them to clear faults , if not i would recomend getting it plugged in , if vehicle is not in warranty go to landrover specialist , much cheaper!!!!!
Posted on Oct 23, 2008
good chance broken line going to that cylinder. it is still pushing air but just not making it all the way there look at the bleeder valve or the fill valve get spray bottle with soapy water spray suspension in the area of the valve look for bubbles.
Posted on Sep 04, 2009
it could be from many reasons...sometimes even the ABS system will cause this fault or even the Steering position Sensor. if it comes and goes then inspect your height sensors as the early version of the height sensors are getting weak and like melting so it gives wrong reading which cause the fault...offer more info. and you'll get your solution
Posted on Jul 05, 2010
Tips for a great answer:
Nov 30, 2016 | BMW Cars & Trucks
May 16, 2016 | 2004 Land Rover Range Rover
Feb 14, 2012 | 2004 Land Rover Range Rover
Sep 10, 2011 | 2004 Land Rover Range Rover
Feb 27, 2011 | 2004 Land Rover Range Rover
Sep 01, 2010 | 2004 Land Rover Range Rover
Jul 28, 2010 | 2004 Land Rover Range Rover
Mar 12, 2010 | 2003 Land Rover Range Rover
Feb 25, 2010 | 2004 Land Rover Range Rover
Sep 02, 2009 | 2004 Land Rover Range Rover
831 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: