Question about 2004 Chrysler Concorde

1 Answer

I own a 2004 Chrysler Concorde and my oil light comes on when i come to a complete stop and goes off when i accelerate. I have replaced both the oil pump and sending unit and the light is still coming on when I come to a complete stop.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 215 Answers

Thats a sign that either you oil pressure sending unit is going bad, the oil pump is going bad, or you have sludge possibly restricting the oil flow thru the screen of the oil pump.

Posted on Apr 07, 2011

  • 1 more comment 
  • hoguepb Apr 08, 2011

    I clearly stated that oil pump and sending unit had been replaced. Also, in doing so any grime or sludge has been cleared from the area.

  • superponty Apr 10, 2011

    So i guess what would be left is sludge blocking the oil passages thru the engine. Of which by the way can break lose once a new pump is pushing oil as full force. Its also possible that the wires for your oil sending unit are not allowing the correct amount of voltage thru. Its also possible the installation of the oil pump was not done correctly or and in many cases the new parts are actually faulty to begin with expecially eletrical ones.

  • hoguepb Apr 15, 2011

    Ok. thank you for your advice! :-)



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I change the oil pressure switch in a 2004 Chrysler Pacifica

most likely not the sensor; change the oil and use an oil of greater viscosity. which engine? how many miles?

Mar 05, 2013 | 2004 Chrysler Pacifica

1 Answer

How do i reset oil light on 2004 chrysler concorde

hey! if the oil light is on it mean that your oil pressure is to low. you may need some engine work!

Dec 19, 2012 | 2004 Chrysler Concorde

1 Answer

My 2004 Concorde recently started shaking real bad noticeably when I'm at a complete stop. I recently had a tune-up and oil change. I'm paranoid driving my car because I think it's going to...

I would take it back to who did the tune-up and make them fix it. It sounds like your plugs might not be properly gaped, a coil isn't seated, or a coil is not plugged in all the way. You should also check the insulators (ceramic part) on the spark plugs to make sure none of them have cracks.

Sep 13, 2011 | 2004 Chrysler Concorde

1 Answer

My cars oil light stays on the i just replaced the oil switch and oil pump the oil is not getting to the engine i stopped driveing it and it is at the shop what stopping it from getting oil to the engine

If you have a Chrysler 2.7 engines were made with oil passageways that are too small and get too hot. Unless you run only synthetic oil you have problems. The regular motor oil that most people use because it is cheaper slowly burns in the tiny passageways and builds up like cholesterol in a heart until the oil flows no more and the engine blows up. Chrysler did not want to pay to fix the problem, there fix was to recommend synthetic oil. Hope this helps.

Jan 20, 2011 | 2004 Chrysler Concorde

1 Answer

Oil light comes on when brakes are applied. goes off when they are released

Sounds more like an electrical problem. Check for burned out brake light bulbs and low brake fluid which might be the actual problem being reported by the car. If that does not work, check your oil level, could be missing a quart. And if that is not the problem try unplugging the oil sensor unit and go for a test drive:if it does come on again this would confirm an electrical issue.

Nov 15, 2010 | 2004 Chrysler Concorde

1 Answer

How do i change the tail light and brakelight bulbs on my 2004 concorde. is it very difficult ? what kind of tools do i need

Haven't done it in a long time but it is very straight forward. I believe the bulbs are screwed to the back wall of the trunk. Simply pull the out and change them. As a precaution, anytime I change bulbs on a car, I always wear gloves. Stops grease/oil from getting on the new bulb.

Oct 28, 2010 | 2004 Chrysler Concorde

1 Answer

What kind of oil to use in this car

I recomend you to use motor oil specified on your Car's maintenance manual.

Jun 17, 2010 | 2004 Chrysler Concorde

1 Answer

Oil light comes on at stop signs

Low oil pressure,caused by low oil level or plugged oil filter or bad oil pump. First try oil change $25, next replace oil pump.

Jan 20, 2010 | 2000 Chrysler Concorde

2 Answers

OIl pressure light flickers

change the oil pressure switch or the wrong oil

Jan 18, 2009 | 2001 Chrysler Concorde

2 Answers

Oil light

This is a low oil pressure light, have the engine oil pressure checked at a shop, if it is ok replace the oil pressure sending unit.

Oct 02, 2008 | 2004 Chrysler Concorde

Not finding what you are looking for?
2004 Chrysler Concorde Logo

609 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides