Question about 1997 Isuzu Hombre

1 Answer

Clutch problem? Have 1997 Isuzu Hombre Extented Cab 2.2l w/ 5speed manual. Will not go into gear at idle speed. Only way to get into gear is to set parking brake and depress clutch. Once you release parking brake, truck jerks forward or backward with clutch still depressed until it chokes out. Thanks.

Posted by on

  • albertotru20 May 11, 2010

    Verify your master and slave clutch cylinders. Check for leaks if so, replace both the slave and master cylinder.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Your clutch is out or needs to ajusted

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my 96isuzu hombre idle at 1500 when I turn the air conditioning on


1500 is a little high. If this is an automatic then the idle should be about 700 in neutral and up to 700 in drive. With the ac on it should not be over 1000. You should check the idle air speed motor.

Apr 18, 2015 | 1996 Isuzu Hombre

1 Answer

1997 Isuzu hombre NO movement when into gear, left IT in first gear let UP off the clutch and the truck didn't jump or CUT off. . What's wrong with it?


MT trans. got it. (said clutch let up.. is the clue)
engine is running right? (sorry)
and you shift to all gears, and car does not move, RIGHT?

if the clutch slips and car will not move in ALL gears.
the clutch is bad, or if a cable clutch, never setting free play on cable is the cause,... done 100s.
or if hydraulic actuated clutch pedal (im too lazy to look)
then if it fails the car can only moved if you start engine in gear.
see?
please post all steps.
i get in car,
i start engine in neutral. (did you) or start in gear with clutch to floor.?
i then select all gears, and release clutch and car will not move.
like that.... and win. (i can diagnose any clutch, ive wrecked many racing, so.... see all horrors) and fixed them by self. all.

if you can only move car , starting engine in gear.?
that is bad clutch cable or actuator (slave or master cylinder)

is the clutch locked all times, or slips all the time.
see? only that need be said.
and 10 other symptoms. (chatters, noises, grabs, etc)

Apr 17, 2015 | 1997 Isuzu Hombre

1 Answer

1997 isuzu truck stalls when a/c on


Could be a problem with the compressor, or the idle air control valve that controls idle speed.

Sep 12, 2012 | 1997 Isuzu Hombre

1 Answer

I have a 97 isuzu hombre is poping when getting into 5 gear


syncros are gone for the fifth gear, replace trans or dont use fifth gear. short distance vehicle, good luck

Dec 30, 2010 | 1997 Isuzu Hombre

1 Answer

My 97 Hombre with 2.2 L 4 cyl, all of a sudden


probably the throttle position sensor,but also could have jumped time.i would take the T.P.S. out and check the resistance,i am not sure what the correct resistance is for that model but you can find out at the parts store.

Nov 21, 2009 | 1996 Isuzu Hombre

1 Answer

Clutch friction is middle ways instead of grabbing from floor.


should be auto adjusting, clutch is probably going out, you will notice it beginning to slip in high gear as it wears out more

Apr 23, 2009 | 1997 Isuzu Hombre

1 Answer

Idle speed of 96 hombre 4 cylinders


The vehicle is going to idle higher when the a/c is on to compesate for the extra load that is on it at an idle.Dont worry about it.

Mar 28, 2009 | 1996 Isuzu Hombre

1 Answer

2nd gear clutching


STOP Downshifting!
STOP Forcing gear change, watch the Engine RPMs and shift accordingly, HOMBRE's are as good as the operator's. Hombre's have dash shift indicators which illuminate when it's time to 'shift' and not before, This has nothing to do with gear oil either. If you've drained it, you best fill it immediately and make sure it's ample level. The heat these gears sustain in is inceredible, cooling lubricant is essential. Here's a tip, while engine is OFF, ignition key is engaged, dash is illuminated, depress clutch peddle, keep it depressed and walk through all gears with gear shift, shifting should be smooth and unpeded, including reverse. If resistance is experienced at one or more gears, gear alignment is off as a result of inproper gear shifting while driving. Continue to drive vehicle just shift slower until clutch needs replacement then do an entire drive shaft upgrade. It worth it, it's great truck.

Jul 25, 2008 | 1998 Isuzu Hombre

Not finding what you are looking for?
1997 Isuzu Hombre Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...