Question about 2002 GMC Yukon XL

1 Answer

Changing Rear Rotor Studs

While attempting to change a flat tire I stripped my rotor studs. How do I change the rear rotor studs?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 115 Answers

These studs are 'pressed' in at the factory, and really should be replaced by a professional.
At the very least you would need a shop press and/or apowerful air compressor and impact gun.
First, are they in the rotor or the hub. (I don't know if this is a4x2, 4x4, etc.) If they are in the hub itself, this MUST be done by a professional. If they are in the rotor, I would seriously consider replacing the rotor, which in some cases can actually be cheaper.
If you don't want to replace the rotor, please take it to a qualified mechanic, parts store (some do this type of work regularly), or machine shop.
Although I could describe how to do it, an improperly seated wheel stud could have tragic consequenses. Good Luck!

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the drivers side rear rotor so loose, can hear it rattle when kick tire. Pulled wheel and everything looks normal can move it freely. None of others are like that. On 1991 chevy lumina euro


Check your studs,they maybe stripped at the end and the lug nuts are not holding the tire against the rotor tight,replace all 5 studs and all 5 lug nuts and see if it solves your problem.

Apr 23, 2017 | Cars & Trucks

1 Answer

Broken studs on brake disc/rotor


Check out this video on the subject.

http://www.youtube.com/watch?v=Z0avY0p0PU4

Apr 14, 2014 | 1994 Toyota Camry

1 Answer

How do I change the rear brake rotor on my 2006, Toyota Rav 4?


Take off the tire, remove the bolts that hold the brake caliper on. Use a coat hanger to keep the brake hose from stretching. Do not allow the caliper to hang from the hose without support. Grab the rotoe and slide it off the studs.

Apr 01, 2013 | 2006 Toyota RAV4

1 Answer

The bolts were loosen on driver from tire now it's stripped wut to do


you will have to remove the wheel, brake caliper and rotor and remove the studs. Then you will need to install new studs for which you will need a stud installer tool or you can use a lug nut and washers to pull stud through the hub. the stripped out studs can be removed with a hammer. make sure you have the clearance in the back of hub before pounding on them.

Oct 23, 2012 | 1998 Oldsmobile Eighty Eight

1 Answer

Need to replace tire bolts


You should be able to remove the tire and wheel assembly and have the rotor exposed. Remove the two bolts that secure the brake caliber and gently slide the caliper assembly off the rotor. The rotor should then come off. The broken wheel studs can be punched out with a 5 pound hand sledge and a good drift pin. Just install the new wheel studs the same way from the back side.

Oct 22, 2011 | 2004 Ford Explorer

1 Answer

Remove rear brake rotors on a dodge ram 3500


Brake rotors are pressed on just enough to where they shouldn't come off when you are changing the tire .They are held on by the same studs that hold your time on . Remove the tire and tap the rotor with a wooden or plastic malord (hammer) it should come right off. Some car makers put some small bolts on them .when you pull the tire off you can see the small bolts if they are there ,just unscrew them and the rotor will come off .

Jan 05, 2011 | 2006 Dodge Ram 3500 Truck

1 Answer

Need to remove rear axle to replace tire studs


You don't need to remove the axle. Remove the rotor or drum. pound out the broken studs with a hammer. Install the new stud into the hole. Use a wheel nut and some washers to pull the new stud into place. They also make a stud installer tool which makes it a little easier.

Dec 02, 2010 | Ford Expedition Cars & Trucks

1 Answer

How to change rear rotor


Remove caliper and caliper bracket, also make sure you don't have parking brake on, brake rotor will slide off, some time you will need hit the rotor with a hammer between the studs on the rotor, be careful not to hit the studs.

Jan 23, 2010 | 2000 Ford Excursion

2 Answers

Trouble replacing tire stud 1998 Ford Escort


yes he has to get the rotor of and its an easy set up after you get rotor off

Jan 25, 2009 | 1994 Saturn Sl

1 Answer

Checking to see if there is anything tricky about removing the rear rotors on an '05 Tucson and to see if the studs come with a new rotor if it is needed.


Nothing tricky, if you've ever changed a rotor before. One thing the Hyundai has is a single phillips head screw that holds the rotor to the hub. You have to remove that and then with some persuasion the rotor will come off of the hub just like most other rotors. The studs, however, stay with the hub and according to Hyundai you cannot remove the studs from the hub. Therefore, if you need to replace a stud, you will need to eat the cost of a new hub. That, again according to Hyundai, the hub (no labor) will run around $345 as of July 2008. Shop around, I'm sure you can find them cheaper than that. Good luck and be VERY careful about who rotates your tires or has anything to do with taking the lug nuts on or off. It's a very expensive fix if you need to go there.

Jul 25, 2008 | Hyundai Tucson Cars & Trucks

Not finding what you are looking for?
2002 GMC Yukon XL Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

71694 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...