Question about 1995 Mercedes-Benz SL-Class

1 Answer

I am trying to change the crankshaft position sensor in a 1995 Mercedes SL500. I removed the 1 mounting bolt but i don't seem to be able to pull the sensor out of the mounting hole. It seems to be seized around the O ring. Any suggestions?

Posted by on

  • justme947 Apr 14, 2011

    I had already removed the sensor by the time I received the reply. I had already done what was suggested. If it was that easy, I wouldn't have been having trouble.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercedes-Benz Master
  • 8,518 Answers

Hi, if you can twist it while pulling, it should come out easier.

Posted on Apr 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to find the location for my crankshaft position sensor on my 1999 Mitsubishi Diamante


Your 1999 Mitsubishi Diamante is a 3.5L MFI SOHC 6cyl engine.
MFI = multi-port fuel injection
SOHC = single overhead camshaft
This answer covers Mitsubishi Diamante1.8L, 2.4L, 3.0L (SOHC and DOHC), 3.5L, and 1997-2000 1.5L Engines.

2.4L engine shown, others similar.

Fig.1 - CKP position and its two mounting bolts
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-0.jpg

In Fig. 1, the two arrows point to the CKP (crankshaft position sensor) mounting bolts to remove. 2.4L engine shown.

Fig.2 - CKP reluctor removal
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-2.jpg
Remove the sensor and slide the reluctor wheel off of the crankshaft-2.4L engine shown.

1. Disconnect the negative battery cable.
2. Remove the timing belt.
3. Unplug the sensor connector.
4. Unfasten the two retaining bolts, then remove the CKP sensor from the vehicle.
5. Installation is the reverse of the removal procedure.

Reference: Autozone online repair guide: Mitsubishi Galant/Mirage/Diamante 1990-2000, at
www.autozone.com

Fig.3 - photo - new 99Diamante CKP, a Wells part #SU4313
am-trying-find-location-crankshaft-vkz3iz4htmqkl2kxsk34hqrj-3-5.jpg

Jul 31, 2016 | 1999 Mitsubishi Diamante

1 Answer

Ford Expedition 2001 crankshaft sensor location and installation


  • Located front of engine, close to crank pulley
  • press the helpful button and follow me on Fixya for more tips
  • Insert the square tip of a 1/2-inch socket wrench into the square hole in the center of the serpentine belt's adjustment pulley. The adjustment pulley is the smallest pulley the belt wraps around.
  • Pull the adjustment pulley toward the engine with the socket wrench to release the tension on the serpentine belt, then pull the belt off the air conditioning compressor's pulley.
  • Remove the bolts which secure the air conditioning compressor to its mounting brackets with an open-end wrench, then position the compressor to the side of the engine compartment. Do not disturb the hoses that attach to the compressor.
  • Pull the electrical connection off the crankshaft sensor.
  • Remove the two bolts that secure the crankshaft sensor against the engine with an open-end wrench, then slide the sensor out of the engine.
  • Slide the new crankshaft sensor into the engine, then install and tighten the sensor's two securing bolts with an open-end wrench.
  • Press the electrical connection onto the crankshaft sensor.
  • Position the air conditioning compressor against its mounting brackets, then install and tighten the compressor's bolts with an open-end wrench.
  • Pull the serpentine belt's adjustment pulley toward the engine with the socket wrench, then position the belt onto the air compressor's pulley. write up found @ehow

How to Replace the Crankshaft Sensor in Ford 150 eHow

Jan 28, 2016 | Ford Expedition Cars & Trucks

1 Answer

How to change a crank position sensor on 2006 suzuki forenza


5) Install the rear A/C mountingbracket. Tighten the rear A/C mounting bracket bolts to 35 Nm (26lb-ft).6) Install the A/C compressor. 7) Install the power steering pump. 8) Connect the negative battery cable.12_16_2011_6_00_05_pm.jpg
If this helps, please say so! Thanks! :-)

Dec 08, 2011 | 2006 Suzuki Forenza

1 Answer

Locating the crank censur 1995 ford Thunderbird


The Crankshaft Position (CP) sensor, located inside the front cover is used to determine crankshaft position and crankshaft rpm.


REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Loosen the water pump pulley bolts, then remove the accessory drive belt is necessary.
  3. Disconnect the wiring to the crankshaft position sensor. Remove the sensor mounting bolt, then remove the sensor.
To install:
  1. Install the sensor and connect the wiring. Tighten the mounting bolt to 71-106 inch lbs. (8-12 Nm).
  2. Install the accessory drive belt if removed. Tighten the water pump pulley bolts as described in routine maintenance.
  3. Connect the negative battery cable.

Hope helps (remember to rating this free answer).

Oct 09, 2011 | 1995 Ford Thunderbird

1 Answer

How to replace crank shaft position sensor


Click over image for zoom...

zjlimited_1122.jpg

Fig. 1: View of the crankshaft position sensor and its location-1996 5.2L engine shown


zjlimited_1123.jpg

Fig. 2: View of the crankshaft position sensor and its location-1996 4.0L engine shown


Removal & Installation
4.0L Engine
  1. The CKP sensor is located on the transmission bellhousing. Disengage the sensor wiring connector and remove the sensor wiring hold-down clip from the fuel rail.
  2. Remove the sensor mounting bolt and carefully pull the sensor out of the bellhousing.
  3. Installation is the reverse of removal.

5.2L and 5.9L Engine
  1. The CKP sensor is bolted to the top of the cylinder block near the rear of the right cylinder head. Disengage the sensor wiring connector and remove the two sensor mounting bolts.
  2. Carefully pull the sensor out of the cylinder block.
  3. Installation is the reverse of removal.

Hope this helps (remember to rate this answer).

Apr 28, 2011 | 1996 Jeep Grand Cherokee

1 Answer

Where's the cranck sensor located?


Click the boxes with a red x in them to see diagram images. 5VZ-FE Engine
  1. Disconnect the crankshaft position sensor harness. Fig. 1: Exploded view of the crankshaft position sensor mounting 86824pa8.gif

  2. Remove the bolt retaining the sensor to the vehicle.
  3. To install, attach the sensor to the vehicle, tighten to 69 inch lbs. (8 Nm).
2VZ-FE and 3VZ-FE Engines
  1. Remove the engine under cover.
  2. Remove the alternator.
  3. Unbolt the alternator bracket.
  4. Disconnect the crankshaft position sensor harness.
  5. Remove the bolts securing the sensor and the sensor. Discard the O-ring.
  6. When installing, apply a light coat of engine oil on the O-ring, install on the sensor tighten the bolts to 74 inch lbs. (9 Nm).
1FZ-FE Engine
  1. Remove the engine under cover.
  2. Unbolt the sensor protector. Fig. 2: Exploded view of the 1FZ-FE crankshaft position sensor mounting 86824pb3.gif

  3. Disconnect the crankshaft position sensor bracket and harness.
  4. Remove the bolt, nuts and sensor.
  5. When installing, attach the sensor and tighten the bolt to 14 ft. lbs. (20 Nm) and the nuts to 78 inch lbs. (9 Nm).

Jan 28, 2011 | 1989 Toyota 4Runner

3 Answers

Hi there, Hope you can help... According to Mercedez service centre after their diagnostic, I need to have crankshaft sensor and camshaft sensor replaced. Question: How difficult would it be for...


both sensors involve quite a bit of work to get to, the sensors are (in themselves) easy to replace!
CKP(crankshaft position sensor is around $55 at autozone where i live.
I cant seem to find the cam position sensor! call your local parts store. they could help with pricing
the CKP itself only requires 1 bolt and one wiring connector.
Good luck

Jan 21, 2011 | 2002 Mercedes-Benz C-Class

1 Answer

How to change crank sensor?


4.7L
The Crankshaft Position Sensor (CKP) is mounted into the right-rear side of the engine block.

5.2L & 5.9L
The Crankshaft Position (CKP) sensor is located near the outer edge of the flywheel (starter ring gear).

3.9L, 5.2L & 5.9L

  1. Remove right front tire and right front wheelhouse liner.
  2. Disconnect crankshaft position sensor pigtail harness from main wiring harness.
  3. Remove two sensor (recessed hex head) mounting bolts.
  4. Remove sensor from engine.
4.7L

  1. Disconnect CKP electrical connector at sensor.
  2. Remove CKP mounting bolt.
  3. Carefully twist sensor from cylinder block.
  4. Remove sensor from vehicle.
  5. Check condition of sensor O-ring.

Mar 04, 2010 | 2001 Dodge Durango

1 Answer

Where is the crankshaft position sensor located on a 2006 chevrol


on 2.2 models remove starter. disconnect 7x crankshaft position sensor wiring harness.remove sensor mounting bolt, with draw sensor, replace o ring and lightly lubricate it with oil.... on 6 cylinder models,..remove the drive belt, jack up car, remove crankshaft pulley. remove sensor bolt and pull out.( noting the wiring harness for installation).

Dec 24, 2008 | 2006 Chevrolet Malibu

Not finding what you are looking for?
1995 Mercedes-Benz SL-Class Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...