Question about Chevrolet Chevy

3 Answers

I have a 2000 2.2 chevy cavalier that i buy today and it have oil in the reservoir bottle what can it be plz help

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 64 Answers

If you are referring to the coolant overflow reservoir, oil usually indicates a blown head gasket or a crack in the engine block. I hope that is not the case for you.
Check the oil. If it is a milky color that is a sure sign of a head gasket or a cracked block.

I hope this helps. God Bless

Posted on Apr 07, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,761 Answers

Take it back if you can -- it likely has a blown head gasket . . .

Posted on Apr 07, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

If it has oil in the coolant resivoir bottle it has most likely got a blown head gasket or a cracked head/block. It will require diagnosing and repair which will be expensive. I hope you got it cheap. Fitting a second hand engine may be a good option as you dont know how hot this one may have gotten.

Posted on Apr 07, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy 2005 cavalier low coolant light keeps coming on and the coolant reservoit tank is empty after only 200 miles. what is causing this?


  1. Check the hoses and clamps going from the reservoir to the radiator and from the radiator to the engine. Make sure they are flexible and in good condition.
  2. Check the reservoir and radiator for leaks.
  3. Replace any parts they may be failing. If no leaks are found proceed to next step.
  4. Check engine oil. If oil has coolant in it you may have a blown head gasket or crack in the head or engine block. Another sign of a coolant leak into the cylinders is white smoke coming from the exhaust after the engine is warmed up.

Jun 24, 2014 | 2005 Chevrolet Cavalier

1 Answer

I used stp power steering fluid for my chevy cavalier 2000 and it still sqeaking


sounds like the seals are dry I used 10w 30 oil in mine and the squeaks went away maybe you have a bad pump

Oct 14, 2013 | 2000 Chevrolet Cavalier

1 Answer

2000 Chevy Cavalier Coupe 2.2 L V4 2200 SFI oil filter size?


its a inturnal filter an you need a 32 socket to remove the cap to remove the oil filter only hand tight n replace the rubber gasket every time you change the filter

Aug 09, 2013 | Cars & Trucks

1 Answer

Where is the oil sending unit located on a 2000 Cavalier


That will be on the backside of the motor. Check with your local autoparts store for a sending unit socket, because they are different from a regular socket.

Feb 28, 2012 | 2000 Chevrolet Cavalier

1 Answer

Need to change coolant recovery tank can a anyone do it


Yes you can do it yourself

Degas Bottle Removal
  1. Drain radiator (8005) until engine coolant is out of degas bottle. Disconnect radiator overflow hose (8075) and engine coolant vent hose at degas bottle.
  1. Remove power steering oil reservoir retaining screws and position power steering oil reservoir (3A697) out of the way.
  1. Remove degas bottle return hose and clamp. Remove degas bottle retainers and remove degas bottle.
Installation
  1. Position degas bottle in vehicle and install retaining screw and nut. Tighten retaining bolt and nut to 9-12 Nm (80-106 lb-in).
  1. Connect degas bottle hose and clamp to degas bottle.
  1. Position power steering oil reservoir onto degas bottle and install retaining screws securely.
  1. Connect radiator overflow hose and engine coolant vent hose to degas bottle.
  1. Fill and bleed engine cooling system as described. Check for coolant leaks and proper engine coolant level after engine reaches normal operating temperature.


    q3699b.gif


    Item Part Number Description 1 8100 Radiator Cap 2 - Nut (1 Req'd) 3 - Bolt and Retainer (1 Req'd) 4 - Nut (1 Req'd) 5 - Bolt (1 Req'd) 6 - Coolant Recovery Hose 7 - Coolant Return Hose 8 - Coolant Recovery Hose 9 8A808 Degas Bottle A - Tighten to 9-12 Nm (80-106 Lb-In)
Hope this helps.

Zeppelinx12

Mar 08, 2011 | 1999 Ford Taurus

1 Answer

What is the atf oil bottle at the side of the air filter for


Do you mean that there is a plastic bottle of ATF sitting loose under your hood? Or are you asking what the black reservoir with a knurled cap that is full of ATF is for?
If you are asking about the reservoir that is part of the car, it is the power steering fluid. Car parts stores will try to sell you fluid in bottles that say Power Steering Fluid, but your car uses Dextron ATF which is the same thing only it is cheaper when you buy ATF by the quart rather than PS Fluid by the pint.
If you have a bottle of ATF, someone probably put it there so it would be handy when they needed to top off the power steering reservoir. Topping off the power steering reservoir is a routine exercise on many BMWs because their power steering hoses tend to leak.

Feb 25, 2011 | BMW 328 Cars & Trucks

1 Answer

Replace a fuel pump on 2000 chevy cavalier


REMOVAL & INSTALLATION
(see Figures 1 and 2)

CAUTION The fuel injection system remains under pressure, even after the engine has been turned OFF. The fuel system pressure must be relieved before disconnecting any fuel lines. Failure to do so may result in fire and/or personal injury.
  1. Relieve the fuel system pressure using the recommended procedure.
  2. Disconnect the negative battery cable.
  3. Drain the fuel tank, then remove the fuel tank from the vehicle.
  4. While holding the modular fuel sender assembly down, remove the snap-ring from the designated slots located on the retainer.

WARNING The modular fuel sender assembly may spring up from its position. When removing the modular fuel sender from the tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during removal to avoid damage to the float.
  1. Remove the external fuel strainer.
  2. Detach the Connector Position Assurance (CPA) piece from the electrical connector and detach the fuel pump electrical connector.
  3. Gently release the tabs on the sides of the fuel sender at the cover assembly. Begin by squeezing the sides of the reservoir and releasing the tab opposite the fuel level sensor. Move clockwise to release the second and third tabs in the same manner.
  4. Lift the cover assembly out far enough to detach the fuel pump electrical connection.
  5. Rotate the fuel pump baffle counterclockwise and remove the baffle and pump assembly from the retainer.
  6. Slide the fuel pump outlet out of slot, then remove the fuel pump outlet seal.

To install:
  1. Install the fuel pump outlet seal, then slide the fuel pump outlet in the slots of reservoir cover.
  2. Install the fuel pump and baffle assembly onto the reservoir retainer and rotate clockwise until seated.
  3. Install the lower retainer assembly partially into the reservoir. Line up all 3 sleeve tabs. Press the retainer onto the reservoir making sure all 3 tabs are firmly seated.

Gently pull on the fuel pump reservoir from retainer to assure a secure fastening. If not secure, replace the entire fuel sender.
  1. Attach the fuel pump connector.
  2. Fasten the CPA connector to the fuel sender cover.
  3. Install a new external fuel strainer.
  4. Install the modular fuel sender.
  5. Install the fuel tank in the vehicle.
  6. Connect the negative battery cable.
  7. Pressurize the fuel system and verify no leaks.
35a484a.jpg

Fig. 1: The module fuel sender assembly is mounted in the fuel tank

fbd4d43.jpg

Fig. 2: Modular fuel pump component identification




Hope this help to solve your problem (remember comment and rated this).

Apr 25, 2010 | 2000 Chevrolet Cavalier

1 Answer

Knocking


Most likely it could be a vavle or it could be something with the exhast. Hope for the exhast. Replacing vavles are costly.

Jun 16, 2009 | 2000 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...