Question about Ford Mustang

1 Answer

Hi, I recently bought a 2002 3.8 liter Mustang and the driver side dim light is not working. I know the first thing to do (besides check the bulb) is to check the fuses but we do not have a fuse box diagram for the fuses or for the relays. I saw where you have posted a diagram for one before but it was too small for me to read. If you could send me another one that would be wonderful !! Thank yo for your time !!!

Posted by on

  • scrumpd215 Apr 07, 2011

    Thank you but it would not let me view the website !!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 64 Answers

The Fuse box diagram is starting on page 166 of the owners manual. Here is a link:
http://www.motorcraftservice.com/pubs/content/~WO2MUS/~MUS~LEN/42/02musog1e.pdf

Hope this helps. God Bless

Posted on Apr 07, 2011

  • Sheekosales Apr 08, 2011

    Sorry about that. Try this link then click on Owners guide 1st print https://www.flmowner.com/servlet/Content...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

Drivers side turn signal blinking fast other side normal, bulb change didn't help


Even after bulb change, do all lamps work? Bad ground can be shown by weak or dim bulb sometimes and this can cause fast flashing. All bulbs which flash must be working and of normal brightness which is sometimes hard to tell when they blink really fast.

Feb 27, 2015 | 2006 Lincoln Town Car

1 Answer

Dim headlight is out


Are you speaking of the dimmer control on the dash?

Feb 20, 2014 | 1998 Ford Windstar

1 Answer

I have a 2002 Hyundai Accent (UK RHD). I've had a headlight go out, side lights and full beam still work. I've changed the bulb and fuse but its still dim. Ran out of ideas...


Hi ,Check the light bulb,see if its seat in the seats properly 'for earth' and the light terminals for dirts ,grease,or corrosion.clean if needs to.I think its a Earth problems

Dec 17, 2012 | 2002 Hyundai Accent

1 Answer

Drivers side tail light lighting up at night when head lights are on but break light not working on that side. passenger side not lighting up when head lights are on but break light working on that side....


You probably already know this, however the GMC 2002 Yukon Denali uses the Wagner 3157 (or equivalent) dual element bulb. The running light uses one element whereas the brake & blinker share the other element that burns brighter.

Check to ensure the correct bulbs are being used. Then check all wire harness connections. Since the blinkers function, then it sounds like the connections are good.

It really sounds like there is a bulb issue, so check that first, then let us know the results.

Mar 11, 2010 | 2002 GMC Yukon Denali

1 Answer

Headlights


check headlight relay

May 05, 2009 | 2004 Chevrolet Cavalier

1 Answer

96 mustang brake light


i would check the bulb socket for the tail light.....p1443=Evaporative Emission Control System Control Valve

Feb 22, 2009 | 1966 Ford Mustang

1 Answer

Buick Regal 93 Light/window electrical problems.


start with the basics... check the bulbs... then the fuses.... after that use a multimeter to see if power is going to the lights that are not working.... bad grounds will cause the lights to be dim or not work.

Aug 31, 2008 | 1993 Buick Regal

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...