Question about 1993 Ford Crown Victoria

1 Answer

My 1993 Ford crown vic the driver side door needs to be adjusted is there anyway to do it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 71 Answers

It is possible to adjust the door however you need to be sure that there is no play in the hinges. Open the door and look at the latch and striker (where the latch goes against). If there is wear on either part then the hinges are probably worn. Lift up on the door and check for excessive play. If play is present the hinges should be checked and replaced if necessary. You may be able to adjust the door to the correct position if there is little to no wear in the hinges. The hinge attaching bolts need to be loosened but left snug. A floor jack with padding can be installed under the door for support. Move the door to the desired position and retighten the bolts. It may tke several tries before you get in right. It helps to make the hinges before moving them so that you have a refernce point. Good luck.

Posted on Apr 07, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

On my 2000 ford crown vic. the power door locks work except for the drivers side. sounds like something is rattleing in the door. any ideas on what and how to fix


the power lock in that door may have broke the rod. remove the door panel to inspect its operation and replace the necessary part. hope this helps

Jan 31, 2011 | 2000 Ford Crown Victoria

1 Answer

The passenger side power window on 1988 crown vic will not go up. when you push button on the drivers side or the passenger side it makes no noise at all .


check the wires inside the drivers door ,where they go from the door to the body,slice the rubber cover to see. often they will break from the drivers door being opened and closed so many times.

Sep 05, 2010 | 1988 Ford Crown Victoria

1 Answer

94 crown vic how do i find out if car has keyless entry


Easy. Does your Vic have a five number keypad above the driver's side exterior door handle? If so the you got key-less. If not, you do not.

Jun 13, 2009 | 1994 Ford Crown Victoria

2 Answers

Driver Side Front Window Replacement


You just drop it down from the top at a slight angle. Then put the bolts back in and check to make sure that it moves freely.

Dec 21, 2008 | 1993 Ford Crown Victoria

1 Answer

Radio does not work in 1993 crown vic, want to put in a replaceme


Go to your local auto parts store where you can purchase a Ford audio removal tool. It looks like a wire shaped "U" that is inserted in the holes on face of audio system ..Follow the directions for use , you will find it a pretty easy task with the correct tool..

Dec 07, 2008 | 1993 Ford Crown Victoria

1 Answer

Electric adjustment of outside mirrors


you need to pull the door off on your fuse panel scematic should tell you you may have a second fuse vpanel under hood drivers side

Aug 02, 2008 | 2003 Ford Crown Victoria

1 Answer

Door panel on 1993 Ford Crown Vic


I just finsished working on this problem. There are three screws that hold the door panel on. One on the opposite side of the rear-view mirror. Another just below it (seen with the door open) and one in the middle on the bottom. When these three screws are removed, carefully pry the plastic trim from around the door handle. You can use a screwdriver. Then gently slide the panel up.

Good luck.

Jun 27, 2008 | 1993 Ford Crown Victoria

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...