Question about 1993 Toyota Pickup

Open Question

Toyota pickup 22re loss of power engin bogged down

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

polarcycle
  • 1392 Answers

SOURCE: need diagram of fuel injection for 85 4x4 22re

Sounds like you have a vacuum leak somewhere. There may be a stop adjustment on the throttle body, but usually high idles are due to unmetered air entering the system.

Posted on Jul 14, 2009

  • 11 Answers

SOURCE: my 89 toyota pickup 22re fuel injected serges when

The Idle Air Control Valve (IACV) may need cleaning or replacement.

This valve lets air bypass the throttle plate so that the engine can idle. The more air, the faster the idle. If this valve is sticky, the computer may have a hard time regulating the idle properly and may surge.

Posted on Oct 09, 2009

  • 1757 Answers

SOURCE: Belt routing diagram for a 1994 toyota pickup 22re

CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!

http://www.2carpros.com/car_repair_information/year/1994/make/toyota/model/pickup/1994_toyota_pickup_drive_belt_routing_diagram.htm

Posted on Feb 28, 2010

  • 1 Answer

SOURCE: 1983 toyota pickup 4x4 22re engine

Clogged fuel line... maybe fuel filter clogged. Air compressor can clear line. Blow out the line coming in to the carb from the tank.

Posted on Apr 21, 2010

  • 1 Answer

SOURCE: 1994 toyota 22re 4x4 pickup fuel injector wiring diagram

I have a 94 toyota 4x4 with the 22re. When driving down the road with the lights on and the windshield wipers on, if i turn the high beams on the truck jerks. Also if ive got the windshield wipers on the voltage gauge moves left to right. When ive got the lights on and i press the brake it bogs while im sitting still just idling. Wat could be causing these problems?

Posted on Apr 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93' toyota pickup 4wd 4 cylinders 22re, sputters when given throttle


Low fuel pressure can cause this or a clogged filter, has the fuel pressure been checked? Has the fuel filter ever been changed?

Feb 13, 2013 | 1994 Toyota Pickup

1 Answer

Where is the knock sensor located


The knock sensor is located in the front of the engine located behind the oil dip stick just to the left. Hope this reply can help you. Good luck!
_________________
elm327 bluetooth scanner

Sep 06, 2012 | 1994 Toyota Pickup

1 Answer

1984 toyota pickup wont start


I would suspect the fuel pump inside the gas tank is defective. Next time it fails to short hook up a fuel pressure gauge to the engine test port in the fuel supply pipe to the fuel injectors. You can buy the tester for about $25.00 on line.

Jun 13, 2012 | Cars & Trucks

3 Answers

I have a 1985 toyota pickup (fuel injected)with a 22re engine, it will run on starting fluid, when i spray it but it wont run otherwise, just put in a new fuel pump, thanks for youre help,


Alright, i have a 1987 Toyota 4x4. it has a 22RE full injected motor..it was able to run, but it was running rich, and idling pretty eratic..and then now..it only starts up..and dies. after like 5seconds. 

Jun 15, 2010 | 1985 Toyota Pickup

1 Answer

94 Toyota 22RE engine. Cold engine starts and


i would check the egr valve sounds like its sticking.

Jan 29, 2010 | 1994 Toyota Pickup

2 Answers

'92 toyota Pickup 22re Intake air Leak???


check fuel presure but it is not a likely culprit likely the throtle position sensor has a bad spot in it
it is likely thet the vechale seams to act up at arround the same rpm or near same rpm every time

Jan 10, 2010 | 1992 Toyota Pickup

5 Answers

Need to change engines


If you have a 22r carbed then all 22r carbed engines from 1981-1995 will interchange. You may need to use sensor out of your old engine however. The 20r,22r,22re,22ret all have the same mounts and tranny bolt patterns. how ever there are lot of differences. you can swap from a 22r to a 22re but you must also swap the entire vehical wiring harness to do it right. if you have a 3.0L i would keep the same engine. some people have swap to the tacoma 3.6L but that is a expensive swap not exsactly bolt on so to say. If you have a 22re then stay with the 1986-1987 22re because the newer 22re use different computers, electronics ,sensors and more.. Same story with the 22ret. I hoped this helped.

Mar 26, 2009 | 1987 Toyota Pickup

4 Answers

1994 toyota 22re 4x4 pickup fuel injector wiring diagram


the color of the plastic plug does not matter... You will have two injector plugs with white/red and yellow wires - those two go to cyl#'s 1 and 3.
the other two plugs will have white and blur wires.. those two plugs go to injectors # 2 and 4.

Oct 09, 2008 | 1994 Toyota Pickup

Not finding what you are looking for?
1993 Toyota Pickup Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...