Question about 1999 Cadillac DeVille

Open Question

How to remove door panel to take dents out of door

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of rear door lift hatch interior plastic panel on a 2005 Dodge Grand Caravan to push out dent in metal door from the inside.


The rear door panel is secured to the door using screws and clips. The screws will be in the handle used to close the door and there may be plastic plugs in the handle hiding the screws. Once these screws are removed, the handle will come off. Look for any more screws along the panel. If there are more, they will be visible. Once the screws are removed, pull on the panel to release the clips that secure it to the door. These clips will require some force to release them and will make a snap/pop sound once released. You may have to put a screwdriver/wedge between the panel and door to start the process of releasing the clips

Jan 20, 2016 | 2005 Dodge Grand Caravan

1 Answer

How to remove dent from back door?


Mainly would depend on type of veh. and dent ,just bowl shape or creased line dent that wasn't here B4 so after inteior door panel removed and access to outside body skin is possible . This is where you could push dent using only soft material tools to back and to push with . If dent is bubble shape 5 - 10 inches you can puchase rubber suction puller or stronger glass transport suction tool and pull it out on exterior panel itself.
Paul Douglas

Apr 06, 2015 | Cars & Trucks

1 Answer

Rear passenger side got dent how do i replace it


Joko,
You are not very clear on exactly where the dent is. The area behind the side door is called a "quarter panel". These parts are not easily replaced, as they are a welded, structural member of the car's structure. Replacement requires specialized cutting and welding tools, normally only found in auto body shops. If the dent is not to bad, you could try removing the interior plastic trim panels and pushing outward to remove the dent.
Providing that the paint is not damaged and there is not an actual crease in the quarter panel [commonly referred to as a "pop" dent] I would suggest contacting a DENT WIZARD company. They will come to your house and fix the dent, using specialized tools and skills. Do a Google search for PAINTLESS DENT REPAIR including your geographic location in the search to find local companies who can do this work. It's much cheaper than taking the vehicle to an auto body shop.

Dec 11, 2011 | 2000 Nissan Quest

1 Answer

1994 Mercury Topaz Fender Removal


Harbor Freight and most local body shop supply stores should have a suction-cup type tool for pulling out dents. You maybe able to remove the inner fender well to get to the dent. To remove the fender, you'll need to remove the top fender bolts, the bolts that attach it to the header panel, and the bolts holding it on back by the door.

Jun 03, 2010 | 1994 Mercury Topaz

2 Answers

I HAVE A DENT IN THE REAR PASSENGER DOOR AND i WANT TO TAKE THE INTERIOR PANEL OFF AND TRY TO POUND IT OUT. I DON'T WANT TO SPEND THE MONEY ON BUYING A MANUAL. THOUGHT THAT IF I COULD TAKE THE INTERIOR...


Door panels are one of those things that when you suffer through doing it the first time, you find that it really is an incredibly easy job. The trick is finding out how to do it the first time. . Door panels are held be snap connectors. You would do well in going to the parts place and buying a door panel remover tool. Without this tool, you will invariably ruin the pressboard material around a few of the snaps. A large screwdriver will do, but still, it is an iffy proposition. . Find all the screws in the handle (often behind plugs) pop the snaps with the tool, hold the panel away from the door metal some, and yoink it in an upward direction. It will life UP. Careful with any wiring. Electric windows will need to be disconnected first. (Remove the control panel by often prying up. Careful.) Manual windows will need the handle removed - often done by sliding the snap loop off of it. It is located between the handle and the door panel itself. . An alternative way - if the dent is an "oil can dent" is to use the big suction cups that some body shops have. If the dent is creased in any way, you'll need to remove the panel. Good luck.

Nov 25, 2009 | 2001 Cadillac DeVille

1 Answer

All my power windows are working from the driver


the body shop may have removed the inside door panel to knock the dent out to do this you have to disconect the electric window conector block they might have forgot to reconect it .it is located behind the door panel

Nov 03, 2009 | 2003 Lexus ES 300

1 Answer

Door was hit on a pole and bent almost straight out. Door closes and opens without any problem, but the top corner edge is bent and doesn't sit flush with the chrome trim or rear door trim. What might I do...


replace the door with a new unit,if money is a proplem, try a used one from junk yard should be cheeper than a new one jus have to get it to oa body shop to paint

Aug 24, 2009 | 2007 Volkswagen Passat Sedan

1 Answer

Inner rear side panel


try pulling the dent out with a toilet plunger , .... wet both the outside of the door and the plunger cup, whack it onto the middle of the dent and give a hard pull, .... repeat if necessary, .... let us know how it works out thx

Aug 10, 2009 | 1999 Pontiac Sunfire

1 Answer

Hi ive got a dent in my passenger side rear door and wont too no the best cheapest and possible way to fix it my car is a Daewoo Nexia.


Remove the inner door panel and with the window up, put a piece of wood against the dented area and smack it with a hammer. Be careful working inside there, the edges of the door insides are sharp. Depending on how bad the dent is this will remove all or part of it. The remainder you can either live with or get some body repair (bondo etc) and repair the rest with that & re-paint. (it's really not that hard to do once you get the hang of it) Just follow can directions!
Good luck and Happy New Year!!

Jan 01, 2009 | Daewoo Korando Cars & Trucks

1 Answer

Back door panel removal


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Oct 18, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
1999 Cadillac DeVille Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...