Question about 2008 Ford Crown Victoria

Open Question

Clunking/ rattling, noise from floor level at firewall on acceleration

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 82 Answers

SOURCE: Loud rattling noise while accelerating

First thing i would try...... ISOHEET, Red bottle..... allows water to be mixed into the fuel and be burnt out of the tank.
get a good qaulity fuel injection cleaner, if you can locate the brand MALCO, i found it quite succesful..... and go with a full tank of premium fuel such as ammoco or shell......do not use yellow bottle of heet

Posted on Jan 22, 2010

Testimonial: "Might be water in the tank?"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clunk noise in propeller shaft.


its the selector putting the transmission into selected gear,have you checked the auto box oil level? might just be a wear and tear thing given age of vehicle

Mar 27, 2014 | 2003 Pontiac Aztek

1 Answer

Struts noise?


I would tend to believe it's more likely a worn sway bar bushing or link if it's a rattle or a small clunk, if it's a loud clunk probably a strut, try bouncing he back of the car when parked, if you get the clunk probably a strut if only when driving,turning,braking probably just a bushing on the sway bar

Jan 18, 2014 | Toyota Camry Cars & Trucks

1 Answer

Grinding sound


what car
what year.
no mater, find any ASE mechanic. (is USA< and no car stated)
noise is most times serious, for you and engine.

Sep 28, 2013 | Honda Cars & Trucks

1 Answer

Clunking/ticking noise during acceleration in 3rd and 4th gears


This sounds on the base of it to be pre ignition, if so the moment you take the foot off the gas it goes? The cure is to retard the ignition timing slightly, have you recently changed your octane of fuel? this will also cause this?
The noise is caused by the expansion of the compressed gases expanding before the piston reaches top dead centre causing the piston to \'rattle\' left unchecked will cause permanent damage and engine failure

Jan 16, 2013 | 2008 Volkswagen Rabbit

2 Answers

My 94 taurus has a problem with acceleration, it does not have any power it will not make it over 35 mph there is a hissing noise when i push the gas all the way to the floor still no power. but my rpms...


SOUND LIKE LOW COMPRESSION.EXCESSIVE CARBON INSIDE ENGINE CAUSE ENGINE TO DIESELING KEEP RUNNING MAKE A RATTLING NOISE WHEN YOU TURN OFF IGNITION.

Sep 12, 2011 | 1994 Ford Taurus

2 Answers

My car makes a clunk sound sometimes when I drive.


without having vehicle up on a four poster and putting my head underneath ?? as for the rattle ?? this could be pinking caused by low octane fuel ,95 unleaded is what it should have

Apr 05, 2010 | 2006 Pontiac G6

1 Answer

Engine is rattling


check oil pressure possible valve tapping -start vehicle and open hood if the noise is on top and sounds like metal tapping u may have a problem with a bad lifter ,oil pressure not lubing head,bent valve/push rod,loose rocker arm. if noise towards front check belts and pulleys-power steering level

Nov 03, 2009 | 2000 Chevrolet Malibu

1 Answer

A rattling noise from the engine bay


Check the heat shields on the exhaust system. They get loose from the extreme heat fluctuations work loose and rattle. Especially the one between the engine and firewall where the 02 sensor screws in. It probably rattles less after warm up because heat causes expansion which makes it tighter. Hope this helps.

Apr 05, 2009 | 2003 Toyota Corolla

1 Answer

Acura Integra '92 loud clunking when accelerating


you can check the wheels make sure there on tight and make sure you tie rods and wheel bearings are good

Dec 30, 2008 | 1992 Acura Integra Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...