Question about 2004 Chrysler Crossfire
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
They Are Removed From The Inside. On The Inside Of The Car Find The Opposite Side Of Where The Light Is. There Will Be Either Carpet Or A Panel There Remove That And It Will Give You Full Access To The Lights. Use A Twist And Pull Motion To Remove The Light From Its Housing Then Replace The Bulb.
Posted on Jan 27, 2009
I have a crossfire and this has happened to me. When it has I have found that the divider, (for the lack of a better word) that is in the truck is not properly seated. Check to be sure it is all the way into the slot that it fits in, especially on the left side. When it is seated correctly the top will go down. Hope this helps.
Posted on Apr 09, 2009
I had the same problem with my 2005 and I had it in and out of the dealership. After about 4 times of taking it in they found that it was a relay in the ignition system. I had problems with the car dieing as I was driving. I also had issues withe the car not starting after I got somewhere. When you try to start the car the lights and everything would come on but the engine would not turn over or make any noise at all. For me this was all under the factory warranty.
Posted on Sep 21, 2009
Tips for a great answer:
May 20, 2016 | 2004 Chrysler Crossfire
Mar 07, 2014 | 2006 Chrysler Crossfire
Feb 13, 2012 | 2004 Chrysler Crossfire
Feb 21, 2011 | 2005 Chrysler Crossfire
Nov 03, 2010 | 2005 Chrysler Crossfire
Aug 01, 2010 | 2004 Chrysler Crossfire
Apr 04, 2009 | 2005 Chrysler Crossfire
Jan 27, 2009 | 2004 Chrysler Crossfire
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: