Question about 2000 Ford Focus

2 Answers

What all d i ned to remove to repair or install a new head gasket for a 2000 ford focus zetec

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 17 Answers

Check your library for a Chilton or Haynes manual for the vehicle and just look at what is required. After you see what is involved, make your decision. I would agree that if you are asking this question, you should probably leave it to the professional, but these book will tell you what you are in for.

Posted on Aug 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 398 Answers

The fact that you asked this question indicates that you must not attempt this job. This is a complicated job which requires experience and knowledge, not counting the set of tools and equipment needed. Contrary to common beliefs some of the these jobs must be done by technicians.

Posted on Aug 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing Diagram of 2000 Ford Focouse DOHC 2.0 Zetec


If you Blew off the timing belt then need Head work also since it is an interference Motor
meaning that the Valve train and Pistons Have no Clearance so U are going to need a lot more work than just a timing belt to run

Mar 31, 2014 | 2000 Ford Focus

2 Answers

Need to know where the cylinder head temperature sensor is on a 2000 ford focus with a 2.0 zetec engine


It should be on the driver's side of the head in the heater hose or tube, there should be two of them, one for the computer and one for the temperature gauge. Good luck.

Jun 25, 2010 | 2000 Ford Focus

1 Answer

How do I remove the old wiper blades from my ford focus Zetec


Buy some new trico exact fit blades as they come with instructions

Mar 10, 2010 | 2000 Ford Focus

2 Answers

2000 Ford Focus serpentine belt replacement


How To Install Replace Engine Serpentine Belt Ford Focus Zetec DOHC 1AAuto.com


Jan 19, 2010 | 2000 Ford Focus

1 Answer

Oil leak on a 2000 ford focus with a dual cam 16v


Most likley just the valve cover gasket.

Sep 10, 2009 | 2000 Ford Focus

1 Answer

What are the spark plug settings for a 1.8 zetec engine


you can set the gap by using the new spark plug casing papar thikness.try it and it will work

May 24, 2009 | 2000 Ford Focus

2 Answers

Car wont tick over


You will need to double check you timing.Did you do the head or mechanic?You may have left a vacuum hose off

Oct 13, 2008 | 2000 Ford Focus

5 Answers

2000 ford focus twin cam timing


please helpme i need timing marks for ford focus 2000 16 valvs

Sep 11, 2008 | 2000 Ford Focus

2 Answers

How do I change the transmission oil in my Ford Focus 1.6 Zetec SE 16 value engine ?


  • drain oil using allen key plug underneath gearbox till all oil is drained refit use new seal if old 1 is damaged then look at front of g/box quater of the way up is another allen key plug remove fill with new oil till it starts to run out hole refit plug and ur done

Jul 09, 2008 | 2000 Ford Focus

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...