Question about Daewoo Lanos

1 Answer

Need list of fault codes for deawoo lanos 1999

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Not a solution: This is my problem...
I needed to get my car smogged, but the check engine light was on. Took to to a local smog station that had replaced a sensor for me in the past in order to pass smog. They could not fix it. Put car in dealership garage for repairs and to date, the transmission module sensor (computer) went out and the ignition sensor was out also. The mechanic replaced both and now the code P1702 comes up. What does that code mean? My car still won't pass smog....

Posted on Mar 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Deawoo lanos electrical fault


does the engine turn over but not fire? it may not be fuel to check remove one of the spark plugs and while you turn engine over get someone to look out for signs of fuel emmitting from open cylinder if there is a smell/puff of fuel check that you've got a sperk at plugs as a starting point if not get the OBD read

Mar 29, 2014 | 1999 Daewoo Lanos

1 Answer

Clutch has gone on my deawoo lanos


Replace it. If you don't have the tools and a small crane to lift the engine take it to a repair shop.

Oct 26, 2009 | 1999 Daewoo Lanos

1 Answer

Whare is the starter motor located on a deawoo lanos


the starter is located under neath the intake manifold. access by jacking up the car. large red battery cable goes directly to starter motor.

Aug 01, 2009 | 1999 Daewoo Lanos

1 Answer

P0337 Code 2001 Deawoo Lanos


its a crank sensor no signal p0337.good luck,i hope this help pls dont forget to rate me thanks

Jun 05, 2009 | 2001 Daewoo Lanos

1 Answer

Severe bearing noise from front wheel bearing/cv joint area.Cv joint still lubricated,I tend to think axle support bearing is dry & on the way out,but only assuming.How does front wheel bearing come out of...


you have to replace bearing and hub as a unit.you have to remove remove brakes and caliper rotor set them aside dont disconnect brake line. get a piece of clothes rack wire to hold brake caliper .do not let it hang by brake hose. you got to remove hub nut. best way to do that is loosen it a litttle while tire still on weight of car keep wheel from turning .

May 03, 2009 | 1999 Daewoo Lanos

1 Answer

I want to change the gear knob on my 99 deawoo lanos can anyone help me and tell me how.


look at it really close there should be a small set screw on the side of the knob make sure you have the right size allen before you try to take it out

Apr 16, 2009 | 1999 Daewoo Lanos

1 Answer

Need fault code info


This may be happening because the sensor is open circuit (sensor fault) check the sensor

Jan 03, 2009 | 1999 Daewoo Lanos

1 Answer

My deawoo cielo is hard to start and misses on idle


Scan the cars computer for error codes. Post the actual code (not a description of it) so can see it. Have a "Fuel Leak Down" test done. "Load Test" the car's battery and alternator.

Dec 28, 2008 | 1999 Daewoo Lanos

1 Answer

Were is fuel pump located on deawoo lanos 2008


Most likely inside of the tank, you should have access to it from the top of the tank.

Dec 17, 2008 | 1999 Daewoo Lanos

1 Answer

Switch off passenger airbag


DAEWOO WILL TAKE THEM OUT FOR FREE AS THEIR IS A FACTORY DEFECT WITH THEM CONTACT DEAWOO FOR IMFORMATION

Dec 08, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...