Question about 1996 Ford Crown Victoria

1 Answer

Turn signals do not work nor does emergency blinkers. They sometimes work for a short while then stop working. Vehicle is a 1996 crown victoria.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

You probably have a short somewhere or you have a bad relay.

Check in your fuse box and see if there is a relay (a big button looking plug with all your small fuses) that is labeled to control the turn signals. More than likely there is a relay for your emergency lights. Go to your local parts store, get the replacements for your vehicle, pull out the old ones and put in the new ones.

If this doesn't solve the problem, then you've probably got a short somewhere and you will need to go to a shop that specializes in auto electrical to get it diagnosed.

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2004 Crown Victoria turn signal will not cut off as I'm turning the corner usually I do not have a problem with this but it has recently stopped working what could be the problem?


Hi,

Inside the switch mechanisms are plastic pieces that actuate the cancelling of the turn signal. Typically, you have to replace the turn signal switch. Not terribly easy and you need to deactivate the air bags, use steering wheel puller and a lock ring puller.

The wires are sometimes really difficult to reefed, sometimes not.

Oct 22, 2014 | 2004 Ford Crown Victoria

3 Answers

1996 chevy 1500 truck when i turn left turn signal on back up lights come on and when i turn the right turn signal on the emergency blinkers come on. The front blinkers work correct.


Hello: There are two things that could be dausing this: One is the board that holds the bulbs in the tail light assembly, it could be shorted internally. The other thing is on the rear right fender on the inside there is a electrical distribution box for the rear lights it also could be internally shorted, also the connectors to that box could be corroded and causing your problem. Hope this helps.

Nov 09, 2011 | 1996 Chevrolet C1500

1 Answer

My signal lights dont work on my 1995 ford crown victoria i need to know what fuse to change


turn signals usually have a flasher relay, you might also look at the switch in teh steering column. if the emergency flashers still work, swap the flashers, to see if that fixes the flashers.

Sep 03, 2010 | 1995 Ford Crown Victoria

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

1 Answer

'96 ford Crown Victoria....No hazard or brake light no turn sigal


Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.

Nov 09, 2009 | 1996 Ford Crown Victoria

1 Answer

Turn signals stop working , everything else is ok, which fuse is for turn signals on ford crown victoria 2002 p71.


IT IS PROBABLY THE MULTI FUNCTION SWITCH ..THAT IS WHAT YOU USE TO TURN THE BLINKERS ON..TRY TURNING ON YOUR EMRGENCY BLINKER BUTTON AND IF THEY WORK THAT WAY IT IS NOT THE FUSE...THE MULTI FUNCTION SWITCHES ARE PRONE TO FAILURE...

Jul 09, 2009 | 2002 Ford Crown Victoria

1 Answer

Blinkers will not stop making noise


its time to replace your flasher relay

Jun 03, 2009 | 1999 Ford Crown Victoria

2 Answers

No turn signals or emergency blinkers


Sounds like a multifunction switch, work the emergency flasher button up and down a few times, then attempt to work the turn signals if the signals work then you will need a multifunction switch.

Apr 30, 2009 | 1997 Ford Crown Victoria

3 Answers

Blinkers stopped working


Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.

Oct 20, 2008 | 1996 Ford F150 Regular Cab

Not finding what you are looking for?
1996 Ford Crown Victoria Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...