Question about Hyundai Elantra

1 Answer

What all do I have to do to remove the engine from the car?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 456 Answers

Hi.

i would not normally redirect you without giving you some idea what to do, but in this case i think the best advice i can give you is to find an owners workshop manual for your car. Haynes is one of the better ones. ebay has used manuals for most cars, at about half the new price.

the workshop manual will be written specifically for your make/model, and will have step by step instructions, and usually photos showing any awkward bits.
this will be much easier to follow that any instructions i can give here.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 olds aurora 3.5l engine removal


Remove the bonnet, drain oil and water remove radiator and fan remove all hoses cables and wiring attached to the engine. take weight of engine with a floor crane support the transmission .uncouple transmission from engine remove engine mount bolts , take a little more weight with the crane and slide engine clear of transmission , lift clear of car and slide crane clear to engine stand.

Dec 25, 2014 | 2001 Oldsmobile Aurora

1 Answer

Re-sealing timing belt cover 2007 Camry


wow no engine stated, post engine size.
depends if mechanic is size of squirrel or a gorilla.
huh?
why not longin to alldata. com and read the page on timing belt changeout.
you can goggle this, 1000s of hits, why not ?

there are serious costs to do service on most FWD cars.
next time buy a RWD car. far easier to fix.
FWD is cheaper to make, (pull rad, fix, put back Rad)
there are 3 engines. ill roll the dice, and log in to alldata.
and see. 37steps out and 37 steps in,
about
not one word, TO pull engine, 2AZ-FE CHAIN
THE 2GR-fe ENGINE IS CHAIN TO.
see step 29, your posted ITEM>!!
PASTED, 2gr CAM BELT SECTIONS;
  • 2007 TOYOTA Camry HV

1. REMOVE LUGGAGE TRIM SERVICE HOLE COVER
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
4. REMOVE FRONT WHEEL RH
5. REMOVE ENGINE UNDER COVER LH
6. REMOVE ENGINE UNDER COVER RH
7. REMOVE FRONT FENDER APRON SEAL RH
8. DRAIN ENGINE OIL


10. REMOVE NO. 2 ENGINE MOUNTING STAY RH
11. REMOVE ENGINE MOVING CONTROL ROD SUB-ASSEMBLY
12. REMOVE NO. 2 ENGINE MOUNTING BRACKET RH
13. REMOVE V-RIBBED BELT TENSIONER COVER SUB-ASSEMBLY
21. SET NO. 1 CYLINDER TO TDC/COMPRESSION
22. REMOVE CRANKSHAFT PULLEY
23. REMOVE CRANK POSITION SENSOR
24. REMOVE OIL PAN SUB-ASSEMBLY
Remove the 12 bolts and 2 nuts.
Insert the blade of SST between the crankcase and oil pan. Cut through the sealer and remove the oil pan.

25. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY
Remove the 2 nuts, tensioner and gasket.

Do not turn the crankshaft without the chain tensioner.
26. INSTALL ENGINE HANGERS
Install the No. 1 engine hanger and No. 2 engine hanger with the bolts as shown in the illustration.
  • Attach the sling device to the engine hangers and chain block.
27. REMOVE ENGINE MOUNTING INSULATOR
Attach the engine chain hoist to the engine hangers.
  • Do not attempt to hang the engine by hooking the chain to any other part.
  • Remove the bolt and disconnect the engine mounting insulator FR.
  • Remove the 4 nuts from the engine mounting insulator RH.

  • Raise the engine and remove the engine mounting insulator RH.
28. REMOVE ENGINE MOUNTING BRACKET RH
Remove the 3 bolts and engine mounting bracket RH.
29. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY
30. REMOVE TIMING CHAIN CASE OIL SEAL
31. REMOVE NO. 1 CRANKSHAFT POSITION SENSOR PLATE
Remove the crankshaft position sensor plate.
AND SO ON,,,, end. quote.

AS YOU CAN SEE ITS NOT A MOTOR PULL BUT IS UNMOUNTED
AND FLOATED,

Now begs the question, which is less work. the above, or just pull the engine, and work sitting down. easy work and higher quality
may that depends on the person and his/her size.

Jan 08, 2014 | Toyota Camry Cars & Trucks

1 Answer

How do you change the oil pump in a 1995 chevy lumina 3100


You must remove the oil pan. I do not think you can do this with the engine in the car. If you can remvove the pan from the bottom without engine removal, it would be easy. Most every engine has to be removed to fully remove the oilpan. So my solution is- remove engine, remove oilpan, remove pump, replace pump, pan, and engine.

Dec 04, 2013 | Chevrolet Lumina APV Cars & Trucks

1 Answer

Do i need to remove the engine from the car to change the timing chains


no you dont need to remove engine. but you have to engine hoist or chain hoist support engine because you have to remove front engine mount to remove timing chain cover.

May 20, 2013 | 2001 Nissan Altima

1 Answer

What is involved in replacing motor in 1992 mr2


You have to undue all the pipes, and connections(be sure to label each pipe and wire to prevent further headaches upon re installation.) Drain all fluids out of engine and transmition. (might as well do a coolant flush through the entire coolant system while the engine is out through the pipes that lead to and from the radiator.) Depending on if you have a 3sgte mr2 you may have to remove the turbo to make the engine easier to remove (you have to take the engine, and transmition out through the bottom of the car. remove rear axles if you can, may have to just remove them from the car's suspension and take them out with the engine and transmition
Thats what you have to do to remove the engine. to replace just the engine you will have to remove the transmition from the engine, buy a new engine-transmition seal, replace it, and bolt the old transmition to the new engine.
Repeat the removal steps in reverse to install the drive unit again

Dec 07, 2010 | 1992 Toyota MR2

1 Answer

How do you remove a engine from 1995 mazda millenia


ANY TIME YOU GET READY TO REMOVE ANY CAR ENGINE.YOU NEED A HAYNES REPAIR MANUAL.IT WILL SHOW AND TELL YOU HOW TO REMOVE ENGINE.IT WILL TELL THINGS YOU NEED TO REMOVE BEFORE REMOVING ENGINE.IT SAVE YOU TIME AND HAVE ALL YOUR TORQUE SPECS.

Mar 01, 2010 | 1999 Oldsmobile Alero

1 Answer

How do you remove and replace engine mounts on 2000 E320


Remove the electric fan. Remonve the drive belt. Lower the AC compressor by removing the three bolts. Do not disconnect the gas lines. Raise vehicle and remove the engine panel. remove upper engine mount bolts. Raise engine and remove lower engine mount bolts. Then remove engine mount.
These instructions are for removing the engine mount on the left side. I haven't done the right side .

Jan 14, 2010 | 2000 Mercedes-Benz E-Class

2 Answers

Where is the engine coolant sensor in a v70 99 volvo


Coolant Temperature Sensor/Switch (For Computer): Service and Repair
ENGINE TEMPERATURE SENSOR
Removal

c32b253.jpg


Engine temperature sensor, 5-cylinder
Jack up the car.
Remove protection cover from under engine.
Drain the coolant.
Lower the car.
Release coolant hose from thermostat housing using pliers.
Remove thermostat housing.
Remove sensor.


02daadd.jpg

Engine temperature sensor, 6-cylinder
Jack up the car.
Remove protection cover from under engine.
Drain the coolant.
Lower the car.
Loosen oil reservoir for servo pump.
Remove coolant reservoir and put it to one side.
Remove screws and outer/upper timing-gear casing.
Remove screws and wire channel.
Disconnect connector.
Remove 4 screws and thermostat housing.
Remove sensor and wires.
Installation
Engine temperature sensor, 6-cylinder
Install thermostat housing sensor.
Position wires in slot on thermostat housing.
Note! The white marks should be positioned in lower opening of slot, from underneath.
Position gasket on thermostat housing correctly and install thermostat housing using two of the screws.
Position thermostat housing correctly and tighten the four screws.
Position wire channel correctly and position wire in channel.
Tighten screw on wire channel.
Connect the connector.
Install outer/upper timing-gear casing.
Install coolant reservoir.
Install oil reservoir for servo pump.
Follow-on work, 6-cylinder
Fill up coolant.
Warm the engine until the thermostat opens.
Switch engine oft and check the level. Re-fill if necessary.
Check for leaks.
Check in VADIS vehicle communication (read-out of parameter values), for current engine system, that the engine temperature shown appears
correct.
Engine temperature sensor, 5-cylinder
Install in reverse order.
Follow-on work, 5-cylinder
Fill up coolant.
Warm the engine until the thermostat opens.
Switch engine off and check the level. Re-fill if necessary.
Check for leaks.
Check in VADIS vehicle communication (read-out of parameter values), for current engine system, that the engine temperature shown appears
correct.

Sep 19, 2009 | 1999 Volvo V70

1 Answer

Engine removal


disconnect engine to the trans mission , remove bolts and nuts.disconnect engine to the chassis , remove bolts and nuts, then remove the engine to the car.

Jul 22, 2008 | 2002 Saab 9-5

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...