Question about 1988 Mitsubishi Pickup

2 Answers

Hi i have a 2003 2.5 diesel l200 warrior and it seems very slow on pull away it is in 2 wheel drive but struggles to move untill it gets to 2000 revs, it has just been serviced and is still the same. I know these are not a racing car but it must be better than this as it has a 2.5 cc engine any answers would help me. Is this normal and does it need scanning thanks Andy

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like a vgt valve it controls vacuum for turbo mine did that is the engine managment light on?

Posted on Jun 11, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Take it back to your garage, did you tell them about this problem when you brought it in? If you did, they should have at least diagnosed it for you and given you an estimate for trying to repair it.

Posted on Apr 06, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Vibration in steering wheel in park and slow speed and seems to go away at 55mph.


More info please ! Steering wheel wont shake in park if vehicle not moving. But to hazard a guess without knowing make year are model would not be possible .

Aug 30, 2015 | 2003 Dodge Durango

2 Answers

Cigarette lighter 10A fuse keeps blowing in Mitsubishi L200


look inside the socket coin fall into the socket

Oct 12, 2012 | Mitsubishi Cars & Trucks

1 Answer

The car steering wheel would vibrate and the entire care would vibrate. Then go away. Drove about 200 miles, started again. Then stopped. Pulled over twice eveything looked okay. Got home and the...


the wheel bearings are going out if thay are now starting to heat up you need to replace them. but you can first jack up the front end ( both sides off ground together) get a long( 8' or better) 2 x 4 and place under wheel on ground andput presure on tire up wad and the tie sould move in a good bearing but if tire moves aound like its lose then it needs replaced

Jul 31, 2011 | 2003 Chrysler Town & Country

1 Answer

When I drive slow over bumps/speed bumps I hear a noise in the right front wheel well. The car does not seem take bumps well but seems to be better going over them at higher speeds. Shocks? Struts?...


It could be a bad Shock/Strut, Ball Joint or a bad CV Axle. Put the car on a lift and try to move the parts around to try to isolate the noise.

Jun 24, 2010 | 2003 Oldsmobile Alero

3 Answers

My truck is stuck in 4 lo


pull atc 25 amp fuse in underhood fuse center and 10 amp 4wd fuse inside cars fuse box,your problem is in control box behind kick panel on pass. side ,corrosion build up,

Mar 06, 2009 | 2000 Chevrolet Blazer

1 Answer

05 mitsubishi l200 warrior changing up from 1st gear to 2nd allways snags but does not crunch


I have just got a mitsibushi L200 with no hand book .
Is there anyone who knows how to get it into two wheel drive,
I have tried but get the flashing 4 wheel drive simble still on the display and the sterring is heavy like its still in four wheeldrive.
HELP

Oct 06, 2008 | Mitsubishi Pickup Cars & Trucks

1 Answer

Hi, I have an 03 mitsubishi L200 Warrior diesel 2477cc, the engine management light comes on, if you switch the ignition off let it reset then start it again it goes off untill you drive again, there isnt...


hello mate if it has got lack of power it could have a split vacuum hose on the turbo actuator and there is 5 or 6 hoses at the back of the rocker make sure they are all ok and not split. it sounds like u have no boost so it would put a malfunction in the ecu cause the the boost pressure sensor would be reading incorrectly. 

Aug 03, 2008 | Mitsubishi Pickup Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...