Question about 2006 Chrysler Sebring

3 Answers

The light for the air bag keeps coming on. What is up with this?

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 257 Answers

That is the trouble light for your air bags. It could be a broken or loose wire, or a bad sensor. I tell people with this problem to take it to a shop because it takes a computer to even start to diagnose and it is easy to short out the system, setting off an airbag that can cost up to $3,000 to fix. If the shop pops one, their insurance takes care of it. If you don't like their estimated cost, get a second opinion. But it could keep the bags from working, and cause an insurance nightmare, so I would get it looked at.

Posted on Apr 06, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 4,977 Answers

You have an intermittent problem with the system it could be a bad clock spring in the steering column that has an intermittent problem.you need to have the code in the abs module pulled to know were to start the diagnosis.this should be handled by a qualified tech as this system can be dangerous to work on by someone that has no knowledge of the system.

Posted on Apr 06, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 504 Answers

CHECK CAR WITH CODE SCANNER FOR AIR BAG FAULT CODE /OR BRING TO GARAGE TO SCAN CODE FAULT

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

AIR BAG LIGHT KEEP COMING ON DID SEND IT AND BEEN RESET STILL COMING ON


There is a code stored in the air bag computer , have it checked an fixed by a qualified repair shop !

Sep 02, 2016 | Cars & Trucks

1 Answer

Procedure for turning off warning bell on air bag light sensor on pt cruiser 2004 model


You need to take your motor to a Garage where they can put a diag machine on it.

Apr 29, 2014 | 2004 Chrysler PT Cruiser

1 Answer

My air bag light keeps coming on. What do I do?


There are several sensors related to air bags. Normally when the panel light is on it indicates the air bag in NOT FUNCTIONAL. You should have this check by a reliable shop or dealer. If you and not sure of how to test or check an air bag system you shouldn't tinker with the system. It is possible to set off the air bag(s) accidentally. That could be dangerous.

Apr 16, 2011 | Dodge Caravan Cars & Trucks

1 Answer

"air bag" light keeps coming on. goes away when I


Try wiggling the seat belt receptacle on the drivers side. If not you will need to take it to get the air bag codes pulled so we can look at whats going on. Try beeping the horn also. There is a wire that brakes sometimes behind the steering wheel called the clock spring this also works the horn circuit.

Feb 15, 2011 | 1999 Jeep Grand Cherokee

1 Answer

Hello I saw the break alert light lit on my


Usually when th fluid level low light comes on, it is because the fluid is ging to the front calipers to fill the pistons that push the brake pads against the rotors. This is because the pads are worn down and probably need replacing.

As for the 3 beeps, it is not related to the brakes.

if it is 5 beeps, it is the air bag or pretensioner.

When the ignition is cycled (turned off and then on), the air bag indicator will remain lit for six seconds and then go out. If an SRS fault exists, the air bag indicator will then flash the two-digit LFC. The air bag indicator will flash the LFC five times, then it will remain illuminated for the rest of the key cycle. The RCM will also communicate the current and historical DTCs through the data link connector (DLC), using the scan tool. If the air bag indicator does not function, and the system detects a fault condition, the RCM will signal the GEM to activate an audible chime. The chime is a series of five sets of five tone bursts. If the chime is heard, the SRS and the air bag indicator require repair.

Mar 02, 2010 | 2002 Ford Ranger Regular Cab

1 Answer

Air Bag light keeps flashing a code 32. what does


Probably tge.clock spring in the steering wheel,or the wieght sensor in the drivers seat causing the xode to come up

Sep 28, 2009 | Lincoln Mark VIII Cars & Trucks

1 Answer

Jeep cherokee 1998--After replacing steering wheel and original air bag the' air bag' dashboard light keeps on and also 'check gauges' light comes on and off. do i need a new air bag or is there a cheaper...


well the check guages and airbag lights are most likely not related, the airbag is most likely the clockspring contact under the steering wheel is defective, check guages means you have a gauge that is reading a problem like low oil pressure or overheating, this can be the body control module causing this as well..

Sep 01, 2009 | 1998 Jeep Cherokee

2 Answers

MY AIRBAG LIGHT STAYS ON.


This means the clcok spring is defecetive take to a shop.

Aug 07, 2009 | 1996 Lincoln Town Car

2 Answers

Air bag light keeps coming on in ford focus 03 plate zetec 1.6 wa


Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.


Just push it together properly and it should clear the AirBag fault


Apr 08, 2009 | 2003 Ford Focus

1 Answer

1996 ford taurus GL


The air bag module monitors all of the electrical circuits of the air bag system. If it detects a fault in any of these circuits, it will cause the air bag light to come on. If it's flashing, count the number of flashes between pauses, this should be the diagnostic code the module is telling you what is wrong with the airbag system (or you can use a scan tool) The only way to keep the light off (besides removing it from dash) is to repair the fault, you can clear the code with the scantool, but it will come right back on if it still sees the fault.

Sep 28, 2008 | 1996 Ford Taurus

Not finding what you are looking for?
2006 Chrysler Sebring Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...