Question about Saab 9 3

Open Question

Saab 9-3 hood release broken its loose - 9 3 Saab Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
bibleman01
  • 334 Answers

SOURCE: remove rear wiper blade on saab 9-5 estate

Best way go to a parts store and ask for help and they would probably slip it on for you
God Bless you Greg

Posted on Dec 03, 2008

Ad
  • 548 Answers

SOURCE: hood release cable is broken

Is there any part of the cable inside the cabin that you can pull with a pair of pliers? I suggest that you try that. You may need to disassemble it from the pull handle to make that work.

Posted on Dec 27, 2008

sparky1500
  • 1066 Answers

SOURCE: hood release latch is broken

find the cable that is supposed to attach to the latch, and grab it with a pair of pliers or the like and pull.

Posted on Dec 29, 2008

  • 41 Answers

SOURCE: Saab hood release does not work

If you can access the cable take a pair of vise grips and simply pull it like you would the hood release handle

Posted on Apr 29, 2009

ILikeBMW
  • 117 Answers

SOURCE: Broken Hood Release

Hello There

In short no there isn't, however it's most likely your plastic release lever is broken and not the metal cable, you need to open the cover over the release lever, there will be a cable you can pull using a gripper and it will release the bonnet, you can easily replace the plastic llever and it's reletively cheap.

Hope this helps, please don't forget to rate me.

Posted on May 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The hood latch cable will not release the hood it frozen


Park in warm garage, thaw, open hood and lube cable using a motorcycle cable lube tool. Ask at auto parts store.

Feb 28, 2015 | 2008 Saab 9-3

1 Answer

04 saab 9-3 hood compatible


You can find a hood that is interchangeable on here.

Nov 07, 2013 | 2004 Saab 9-3

1 Answer

1998 Saab 900 SE With broken hood latch cable.


Here's a video Dan Hooper suggested as a solution to your problem from YouTube:


Opening Hood with Broken Release Cable

Apr 21, 2013 | Cars & Trucks

1 Answer

Hood release not working


you will have to pop the mechanism open from under the car this may be a little difficult you will need a very long screw driver or a pry bar and hopefully you be able to see the latch from under the car.if you can then reach up and manually release the latch once open you will have to replace your cable or the cable tie down which ever is bad. if not you will have to make a new release that you can use on the outside of the car.

Jan 30, 2010 | 2001 Saab 9-3

1 Answer

Saab hood release does not work


If you can access the cable take a pair of vise grips and simply pull it like you would the hood release handle

Apr 29, 2009 | 1998 Saab 900

2 Answers

How do I change headlight bulb on a 2002 Saab 9-5


lift hood, on back of headlight theres a round cover, rotate counterclockwise to remove, you then pull electrical connector off, then there is a wire clip that you push toward front of car and push under the catch, this releases the bulb. installation is reverse order,make sure bulb is centered and notch on bulb lines up with housing. do not touch bulb with fingers, use paper towell, if you do touch it clean with rubbing alcohol. Hope this helps.

Apr 21, 2009 | 2002 Saab 9-5

3 Answers

Saab convertible hood keeps jamming when taking down and putting


Could be 2 things...
THe nipple on the hood can be adjusted higher and lower to make a looser or tighter fit...
or the release cable can be tighted but a small clamp on the radiator core support check those 2 things first...

Mar 13, 2009 | 2001 Saab 9-3

1 Answer

Headlight replacement 2000 Saab 93


To replace the headlamp on a Saab 9-3, open the hood. Behind the headlamp there is a round black plastic cover; screw clockwise and pull back; there is a metal clip holding headlamp in place (9003 i believe is the halogen number). locate top of clip and move very slightly clockwise; the top will pivot down on a hinge; release the wire harness and pull out bulb. Retrace these steps to introduce the new bulb to your Saab.

Hope this helps. Please leave a rating! FIXYA!

Feb 26, 2009 | 2001 Saab 9-3

2 Answers

1991 Saab 900S Convertible- How do I manually open the hood?


a 1991 900 S. does not have an automatic button to open anything with the exception of the door locks.

Jan 03, 2009 | 1991 Saab 900

2 Answers

BROKEN HOOD RELEASE CABLE.NEED TO OPEN MY HOOD


One of the 2 cables on my hood release is loose. One works fine and releases (dirver's side) but the other is loose and does not. I cannot get my hood up. I have a 1998 Jaguar XJ8
Thank you ....

Aug 06, 2008 | Avanti Studebaker Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...